Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 730324, 10 pages
http://dx.doi.org/10.1155/2014/730324
Research Article

Evaluation of the Response of Posttensioned Steel Frames with Energy Dissipators Using Equivalent Single-Degree-of-Freedom Systems

1Facultad de Ingeniería, Universidad Autónoma de Sinaloa, Calzada de las Américas y Boulevard Universitarios S/N, Ciudad Universitaria, CP 80040, Culiacán Rosales, SIN, Mexico
2Coordinación de Mecánica Aplicada, Instituto de Ingeniería, Universidad Nacional Autónoma de México, Ciudad Universitaria, CP 04510, Coyoacán, Mexico

Received 25 March 2014; Revised 10 June 2014; Accepted 12 June 2014; Published 2 July 2014

Academic Editor: Jun Zhang

Copyright © 2014 J. Luz Rivera et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. M. Uang and V. V. Bertero, “Evaluation of seismic energy in structures,” Earthquake Engineering & Structural Dynamics, vol. 19, no. 1, pp. 77–90, 1990. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Teran-Gilmore, “Energy concepts and damage indices,” in Proceedings of the Symposium CUREe-EERC, Report no. UBC/EERC-97/05, pp. 133–140, 1997.
  3. A. Terán-Gilmore and J. O. Jirsa, “Energy demands for seismic design against low-cycle fatigue,” Earthquake Engineering and Structural Dynamics, vol. 36, no. 3, pp. 383–404, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. E. Bojórquez and S. E. Ruiz, “Strength reduction factors for the valley of Mexico taking into account low cycle fatigue effects,” in Proceedings of the 13th World Conference on Earthquake Engineering, Paper 516, Vancouver, Canada, 2004.
  5. G. W. Housner, “Limit design of structures to resist earthquakes,” in Proceedings of the 1st World Conference on Earthquake Engineering, Berkeley, Calif, USA, 1956.
  6. H. Akiyama, Earthquake-Resistant Limit-State Design for Buildings, University of Tokyo Press, Tokyo, Japan, 1985.
  7. B. Akbas, J. Shen, and H. Hao, “Energy approach in performance-based seismic design of steel moment resisting frames for basic safety objective,” The Structural Design of Tall Buildings, vol. 10, no. 3, pp. 193–217, 2001. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Choi and J. Kim, “Energy-based seismic design of buckling-restrained braced frames using hysteretic energy spectrum,” Engineering Structures, vol. 28, no. 2, pp. 304–311, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. E. Bojorquez, S. E. Ruiz, and A. Terán Gilmore, “Reliability-based evaluation of steel structures using energy concepts,” Engineering Structures, vol. 30, no. 6, pp. 1745–1759, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. C. Christopoulos, A. Filiatrault, and C. M. Uang, “Self-centering post-tensioned energy dissipating (PTED) steel frames for seismic regions,” Tech. Rep. SSRP-2002/06, University of California, San Diego, Calif, USA, 2002. View at Google Scholar
  11. M. M. Garlock, R. Sause, and J. Ricles, “Design and behavior of post-tensioned steel moment frames,” in Proceedings of the 13th World Conference on Earthquake Engineering, Paper 2560, Vancouver, Canada, August 2004.
  12. M. Wolski, J. M. Ricles, and R. Sause, “Seismic resistant self-centering steel moment resisting frames with bottom flange friction devices,” in Proceedings of the 5th International Conference on the Behavior of Steel Structures in Seismic Areas (STESSA '06), pp. 481–487, Yokohama, Japan, August 2006. View at Scopus
  13. K.-C. Tsai, C.-C. Chou, C.-L. Lin, P.-C. Chen, and S.-J. Jhang, “Seismic self-centering steel beam-to-column moment connections using bolted friction devices,” Earthquake Engineering and Structural Dynamics, vol. 37, no. 4, pp. 627–645, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. C.-C. Chou and J.-H. Chen, “Column restraint in post-tensioned self-centering moment frames,” Earthquake Engineering and Structural Dynamics, vol. 39, no. 7, pp. 751–774, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. C.-C. Chou and J.-H. Chen, “Seismic design and shake table tests of a steel post-tensioned self-centering moment frame with a slab accommodating frame expansion,” Earthquake Engineering and Structural Dynamics, vol. 40, no. 11, pp. 1241–1261, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. A. López-Barraza, E. Bojórquez, S. E. Ruiz, and A. Reyes-Salazar, “Reduction of maximum and residual drifts on posttensioned steel frames with semi-rigid connections,” Advances in Materials Science and Engineering, vol. 2013, Article ID 192484, 11 pages, 2013. View at Publisher · View at Google Scholar
  17. Y. K. Wen, “Method for random vibration of hysteretic systems,” Journal of the Engineering Mechanics Division, ASCE, vol. 102, no. 2, pp. 249–263, 1976. View at Google Scholar · View at Scopus
  18. R. M. Richard and B. J. Abbott, “Versatile elastic plastic stress-strain formula,” ASCE Journal of Engineering Mechanics, vol. 101, no. 4, pp. 511–515, 1975. View at Google Scholar
  19. A. López-Barraza, S. E. Ruiz, A. Reyes-Salazar, and E. Bojórquez, “Hysteretic model of steel connections for self-centering frames based on experimental studies of angles,” in Proceedings of the World Congress on Advances in Structural Engineering and Mechanics (ASEM '13), Jeju, Republic of Korea, September 2013.
  20. R. Bouc, “Forced vibration of mechanical system with hysteresis,” in Proceedings of the 4th International Conference Nonlinear Oscillations, Praha, Czech Republic, 1967.
  21. T. T. Baber and Y. K. Wen, “Random vibration of hysteretic, degrading systems,” Journal of the Engineering Mechanics Division, ASCE, vol. 107, no. 6, pp. 1069–1087, 1981. View at Google Scholar · View at Scopus
  22. F. Casciati and L. Faravelli, Fragility Analysis of Complex Structural Systems, John Wiley & Sons, 1991.
  23. N. Shome and C. A. Cornell, “Simulation of non-stationary random process,” Journal of Engineering Mechanics, ASCE, vol. 93, pp. 11–40, 1998. View at Google Scholar
  24. RCDF, Reglamento de Construcciones para el Distrito Federal, 2004.
  25. M. A. Montiel and S. E. Ruiz, “Influence of structural capacity uncertainty on seismic reliability of buildings under narrow-band motions,” Earthquake Engineering and Structural Dynamics, vol. 36, no. 13, pp. 1915–1934, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. S. E. Ruiz, M. A. Montiel, and M. Arroyo, “Probabilities of exceeding different limit states for buildings subjected to narrow-band ground motions,” Earthquake Spectra, vol. 26, no. 3, pp. 825–840, 2010. View at Publisher · View at Google Scholar · View at Scopus
  27. C. Villa-Velázquez, Análisis de movimientos sísmicos registrados en el valle de México [Undergraduate. thesis], Universidad Nacional Autónoma de México (UNAM), 2001.
  28. A. Carr, RUAUMOKO Inelastic Dynamic Analysis Program, University of Canterbury, Department of Civil Engineering, 2011.
  29. J. M. Ricles, R. Sause, M. M. Garlock, and C. Zhao, “Posttensioned seismic-resistant connections for steel frames,” ASCE Journal of Structural Engineering, vol. 127, no. 2, pp. 113–121, 2001. View at Publisher · View at Google Scholar · View at Scopus
  30. M. Garlock, R. Sause, and J. Ricles, “Design and behavior of post-tensioned Steel moment frames,” in Proceedings of the 13th World Conference on Earthquake Engineering, Paper 2560, Vancouver, Canada, 2004.
  31. C. Christopoulos, A. Filiatrault, and B. Folz, “Seismic response of self-centring hysteretic SDOF systems,” Earthquake Engineering and Structural Dynamics, vol. 31, no. 5, pp. 1131–1150, 2002. View at Publisher · View at Google Scholar · View at Scopus
  32. A. López-Barraza, S. E. Ruiz, A. Reyes-Salazar, and E. Bojórquez, “Seismic energy demands on steel framed structures with rigid and, alternatively, with post-tensioned semi-rigid connections,” in Proceedings of the 7th Conference Behavior of Steel Structures in Seismic Areas (STESSA '12), Santiago, Chile, 2012.