Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 769206, 8 pages
http://dx.doi.org/10.1155/2014/769206
Research Article

Characterization of Material Stiffness on Injection Moulded Microspecimens Using Different Test Methods

Institute of Polymer Technology, University Erlangen-Nuernberg, Am Weichselgarten 9, 91058 Erlangen, Germany

Received 10 March 2014; Accepted 25 June 2014; Published 10 July 2014

Academic Editor: Steve Bull

Copyright © 2014 Dietmar Drummer et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Dietmar Drummer, Andreas Seefried, and Steve Meister, “Characterization of Material Stiffness on Injection Moulded Microspecimens Using Different Test Methods,” Advances in Materials Science and Engineering, vol. 2014, Article ID 769206, 8 pages, 2014. doi:10.1155/2014/769206