Research Article
Characterization of Material Stiffness on Injection Moulded Microspecimens Using Different Test Methods
Table 4
Tensile test parameters.
| Parameter | Tensile test | Bending test 1 | Bending test 2 |
| Clamping length/support distance [mm] | 11.6 | 10 | 5 | Test velocity [mm min−1] | 0.125 | 0.2 | 0.2 N1 | Measuring range for module calculation [%] | 0.05–0.25 | 0.05–0.25 | 0–0.1 | Maximum Elongation [%] | break | 3.5 | — |
|
|
Force controlled with an elongation of 0.1%.
|