Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 789867, 10 pages
http://dx.doi.org/10.1155/2014/789867
Research Article

Preparation, Microstructure, and Mechanical Properties of Spinel-Corundum-Sialon Composite Materials from Waste Fly Ash and Aluminum Dross

1School of Materials Science and Technology, China University of Geosciences, Beijing 100083, China
2College of Engineering, Mathematics and Physical Sciences, University of Exeter, Exeter EX4 4QF, UK

Received 27 November 2013; Accepted 5 December 2013; Published 30 January 2014

Academic Editor: Filippo Berto

Copyright © 2014 Juntong Huang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. S. Iyer and J. A. Scott, “Power station fly ash—a review of value-added utilization outside of the construction industry,” Resources, Conservation & Recycling, vol. 31, no. 3, pp. 217–228, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. O. M. Dunens, K. J. Mackenzie, and A. T. Harris, “Synthesis of multiwalled carbon nanotubes on fly ash derived catalysts,” Environmental Science & Technology, vol. 43, no. 20, pp. 7889–7894, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. F.-F. Zhu, M. Takaoka, K. Shiota, K. Oshita, and Y. Kitajima, “Chloride chemical form in various types of fly ash,” Environmental Science & Technology, vol. 42, no. 11, pp. 3932–3937, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. L. D. Hulett Jr., A. J. Weinberger, K. J. Northcutt, and M. Ferguson, “Chemical species in fly ash from coal-burning power plants,” Science, vol. 210, no. 4476, pp. 1356–1358, 1980. View at Publisher · View at Google Scholar · View at Scopus
  5. T. Hashishin, Y. Kodera, T. Yamamoto, M. Ohyanagi, and Z. A. Munir, “Synthesis of (Mg,Si)Al2O4 spinel from aluminum dross,” Journal of the American Ceramic Society, vol. 87, no. 3, pp. 496–499, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. E. David and J. Kopac, “Hydrolysis of aluminum dross material to achieve zero hazardous waste,” Journal of Hazardous Materials, vol. 209-210, pp. 501–509, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Johnson, “The foul side of ‘clean coal’,” Chemical & Engineering News, vol. 87, no. 8, pp. 44–47, 2009. View at Publisher · View at Google Scholar
  8. A. Baba and A. Kaya, “Leaching characteristics of solid wastes from thermal power plants of western Turkey and comparison of toxicity methodologies,” Journal of Environmental Management, vol. 73, no. 3, pp. 199–207, 2004. View at Publisher · View at Google Scholar · View at Scopus
  9. J. A. Borcherding, H. Chen, J. C. Caraballo et al., “Coal fly ash impairs airway antimicrobial peptides and increases bacterial growth,” PLoS ONE, vol. 8, no. 2, Article ID e57673, 2013. View at Publisher · View at Google Scholar
  10. S. B. Wang and H. W. Wu, “Environmental-benign utilisation of fly ash as low-cost adsorbents,” Journal of Hazardous Materials, vol. 136, no. 3, pp. 482–501, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Y. Hwang, X. Huang, and Z. Xu, “Recovery of metals from aluminum dross and saltcake,” Journal of Minerals & Materials Characterization & Engineering, vol. 5, no. 1, pp. 47–62, 2006. View at Google Scholar
  12. M. C. Yusta, I. Mármol, J. Morales, and L. Sánchez, “Use of olive biomass fly ash in the preparation of environmentally friendly mortars,” Environmental Science & Technology, vol. 45, no. 16, pp. 6991–6996, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. J.-H. Li, H.-W. Ma, and W.-H. Huang, “Effect of V2O5 on the properties of mullite ceramics synthesized from high-aluminum fly ash and bauxite,” Journal of Hazardous Materials, vol. 166, no. 2-3, pp. 1535–1539, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. N. N. Sampathkumar, A. M. Umarji, and B. K. Chandrasekhar, “Synthesis of α-cordierite (indialite) from flyash,” Materials Research Bulletin, vol. 30, no. 9, pp. 1107–1114, 1995. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Miyake, C. Tamura, and M. Matsuda, “Resource recovery of waste incineration fly ash: synthesis of zeolites A and P,” Journal of the American Ceramic Society, vol. 85, no. 7, pp. 1873–1875, 2002. View at Publisher · View at Google Scholar · View at Scopus
  16. J.-T. Huang, Y.-G. Liu, Z.-H. Huang et al., “Ni(NO3)2-assisted catalytic synthesis and photoluminescence property of ultralong single crystal Sialon nanobelts,” Crystal Growth & Design, vol. 13, no. 1, pp. 10–14, 2013. View at Publisher · View at Google Scholar
  17. F. L. Riley, “Silicon nitride and related materials,” Journal of the American Ceramic Society, vol. 83, no. 2, pp. 245–265, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. Z.-H. Huang, J.-Z. Yang, Y.-G. Liu et al., “Novel sialon-based ceramics toughened by ferro-molybdenum alloy,” Journal of the American Ceramic Society, vol. 95, no. 3, pp. 859–861, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. L.-H. Xu, F. Lian, H. Zhang, Y.-B. Bi, K. Cheng, and Y.-B. Qian, “Optimal design and preparation of beta-SiAlON multiphase materials from natural clay,” Materials & Design, vol. 27, no. 7, pp. 595–600, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. F. J. Li, T. Wakihara, J. Tatami, K. Komeya, T. Meguro, and K. J. D. MacKenzie, “Elucidation of the formation mechanism of β-SiAlON from a zeolite,” Journal of the American Ceramic Society, vol. 90, no. 5, pp. 1541–1544, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. W.-W. Chen, P.-L. Wang, D.-Y. Chen et al., “Synthesis of (Ca,Mg)-α-sialon from slag by self, propagating high-temperature synthesis,” Journal of Materials Chemistry, vol. 12, no. 4, pp. 1199–1202, 2002. View at Publisher · View at Google Scholar · View at Scopus
  22. J. E. Gilbert and A. Mosset, “Preparation of β-SiAlON from fly ashes,” Materials Research Bulletin, vol. 33, no. 1, pp. 117–123, 1998. View at Publisher · View at Google Scholar · View at Scopus
  23. Y. Miyamoto, S. Kanehira, and M. Radwan, “Recycling of industrial and natural wastes to SiAlONs,” Refractories Applications and News, vol. 9, no. 1, pp. 15–16, 2004. View at Google Scholar
  24. O. Yamamoto, M. Ishida, Y. Saitoh, T. Sasamoto, and S. Shimada, “Influence of Mg2+ on the formation of β-SiAlON by the carbothermal reduction-nitridation of homogeneous gel,” International Journal of Inorganic Materials, vol. 3, no. 7, pp. 715–719, 2001. View at Publisher · View at Google Scholar · View at Scopus
  25. G. H. Liu, K. X. Chen, H. P. Zhou, X. S. Ning, and J. M. F. Ferreira, “Effect of diluents and NH4F additive on the combustion synthesis of Yb α-SiAlON,” Journal of the European Ceramic Society, vol. 25, no. 14, pp. 3361–3366, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. K. Matsui, T. Yamakawa, M. Uehara, N. Enomoto, and J. Hojo, “Mechanism of alumina-enhanced sintering of fine zirconia powder: influence of alumina concentration on the initial stage sintering,” Journal of the American Ceramic Society, vol. 91, no. 6, pp. 1888–1897, 2008. View at Publisher · View at Google Scholar · View at Scopus
  27. X. M. Feng, X. Q. Lian, M. X. Jiang, and Y. E. He, “The influences of TiN content on the properties of the in situ Al2O3-TiN composites,” Advanced Materials Research, vol. 311–313, pp. 1906–1910, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. R. A. Janes, M. Aldissi, and R. B. Kaner, “Controlling surface area of titanium nitride using metathesis reactions,” Chemistry of Materials, vol. 15, no. 23, pp. 4431–4435, 2003. View at Publisher · View at Google Scholar · View at Scopus
  29. Z. J. Peng, H. Z. Miao, L. H. Qi, S. Z. Yang, and C. Z. Liu, “Hard and wear-resistant titanium nitride coatings for cemented carbide cutting tools by pulsed high energy density plasma,” Acta Materialia, vol. 51, no. 11, pp. 3085–3094, 2003. View at Publisher · View at Google Scholar · View at Scopus
  30. D. L. Ye and J. H. Hu, Practical Thermodynamics Data Handbook of Inorganic Substances, Metallurgical Industry Press, Beijing, China, 2002.
  31. Y. B. Cai, Z. J. Shen, J. Grins, and S. Esmaeilzadeh, “Sialon ceramics prepared by using CaH2 as a sintering additive,” Journal of the American Ceramic Society, vol. 91, no. 9, pp. 2997–3004, 2008. View at Publisher · View at Google Scholar · View at Scopus
  32. K. Shizaki, S. Komarneni, and M. Nanko, Porous Materials: Process Technology and Applications, vol. 4 of Materials Technology Series, Kluwer Academic, Dordrecht, The Netherlands, 1998.
  33. D. L. Perry, Handbook of Inorganic Compounds, CRC Press, Boca Raton, Fla, USA, 2nd edition, 2011.