Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 794568, 10 pages
http://dx.doi.org/10.1155/2014/794568
Research Article

Constitutive Investigation on Viscoelasticity of PolyVinyl Butyral: Experiments Based on Dynamic Mechanical Analysis Method

State Key Laboratory of Automotive Safety & Energy, Department of Automotive Engineering, Tsinghua University, Beijing 100084, China

Received 26 November 2013; Accepted 22 January 2014; Published 11 March 2014

Academic Editor: Hazizan Md Akil

Copyright © 2014 Bohan Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Otte, M. Jänsch, and C. Haasper, “Injury protection and accident causation parameters for vulnerable road users based on German In-Depth Accident Study GIDAS,” Accident Analysis and Prevention, vol. 44, no. 1, pp. 149–153, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. J. Xu and Y. Li, “Crack analysis in PVB laminated windshield impacted by pedestrian head in traffic accident,” International Journal of Crashworthiness, vol. 14, no. 1, pp. 63–71, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Xu, Y. Li, G. Lu, and W. Zhou, “Reconstruction model of vehicle impact speed in pedestrian-vehicle accident,” International Journal of Impact Engineering, vol. 36, no. 6, pp. 783–788, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. B. Liu, Y. Sun, Y. Li, Y. Wang, D. Ge, and J. Xu, “Systematic experimental study on mechanical behavior of PVB (polyvinyl butyral) material under various loading conditions,” Polymer Engineering and Science, vol. 52, no. 5, pp. 1137–1147, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Zhao, L. R. Dharani, L. Chai, and S. D. Barbat, “Analysis of damage in laminated automotive glazing subjected to simulated head impact,” Engineering Failure Analysis, vol. 13, no. 4, pp. 582–597, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Xu, Y. Sun, B. Liu et al., “Experimental and macroscopic investigation of dynamic crack patterns in PVB laminated glass sheets subject to light-weight impact,” Engineering Failure Analysis, vol. 18, no. 6, pp. 1605–1612, 2011. View at Google Scholar
  7. G. Herndon, K. Allen, A. Roberts, D. Phillips, and S. A. Batzer, “Automotive side glazing failure due to simulated human interaction,” Engineering Failure Analysis, vol. 14, no. 8, pp. 1701–1710, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Wingren, Windscreen Study Usinga Free Moving Headform. An Investigation of Windcreen Behaviourwhen Subjected to Headform Impact, University of Skovde, 2011.
  9. T. Pyttel, H. Liebertz, and J. Cai, “Failure criterion for laminated glass under impact loading and its application in finite element simulation,” International Journal of Impact Engineering, vol. 38, no. 4, pp. 252–263, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. D. Alhazov and E. Zussman, “Study of the energy absorption capabilities of laminated glass using carbon nanotubes,” Composites Science and Technology, vol. 72, no. 6, pp. 681–687, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. R. Iwasaki, C. Sato, J. L. Latailladeand, and P. Viot, “Experimental study on the interface fracture toughness of PVB (polyvinyl butyral)/glass at high strain rates,” International Journal of Crashworthiness, vol. 12, no. 3, pp. 293–298, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Xu, Y. Li, D. Ge, B. Liu, and M. Zhu, “Experimental investigation on constitutive behavior of PVB under impact loading,” International Journal of Impact Engineering, vol. 38, no. 2-3, pp. 106–114, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Z. Aşik, “Laminated glass plates: revealing of nonlinear behavior,” Computers and Structures, vol. 81, no. 28-29, pp. 2659–2671, 2003. View at Publisher · View at Google Scholar · View at Scopus
  14. M. Z. Aşik and S. Tezcan, “A mathematical model for the behavior of laminated glass beams,” Computers and Structures, vol. 83, no. 21-22, pp. 1742–1753, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. P. A. Hooper, B. R. K. Blackman, and J. P. Dear, “The mechanical behaviour of poly(vinyl butyral) at different strain magnitudes and strain rates,” Journal of Materials Science, vol. 47, no. 8, pp. 3564–3576, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. D. Callewaert, J. Belis, D. Delincé, and R. Van Impe, “Experimental stiffness characterisation of glass/ionomer laminates for structural applications,” Construction and Building Matials, vol. 37, pp. 685–692, 2012. View at Google Scholar
  17. Y. Zhang, R. D. Adams, and L. Da Silva, “A rapid method of measuring the glass transition temperature using a novel dynamic mechanical analysis method,” Journal of Adhesion, vol. 89, no. 10, pp. 785–806, 2013. View at Google Scholar
  18. X. Y. Shi, W. N. Bi, and S. G. Zhao, “DMA analysis of the damping of ethylene-vinyl acetate/acrylonitrile butadiene rubber blends,” Journal of Applied Polymer Science, vol. 124, no. 3, pp. 2234–2239, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. W. Stark, “Investigation of the curing behaviour of carbon fibre epoxy prepreg by Dynamic Mechanical Analysis DMA,” Polymer Testing, vol. 32, no. 2, pp. 231–239, 2013. View at Google Scholar
  20. X. L. Zhan, Research on the Viscoelastic Properties of Asphalt Using DMA, Harbin Institute of Technology, Harbin, China, 2007.
  21. S. Y. Chen, M. Xiao, S. Wang, and Y. Meng, “Mechanical properties of block poly(propylene carbonate-cyclohexyl carbonate) investigated by nanoindentation and DMA methodologies,” Journal of Applied Polymer Science, vol. 128, no. 3, pp. 1979–1986, 2013. View at Google Scholar
  22. J. J. Aklonis and W. J. MacKnight, Eds., Introduction to Polymer Viscoelasticity, Wiley-Interscience, 1983.
  23. B. H. Liu, J. Zhou, Y. Sun, Y. Wang, J. Xu, and Y. Li, “An experimental study on the dynamic viscoelasticity of PVB film material for vehicles,” Automotive Engineering, vol. 34, no. 10, pp. 898–904, 2012. View at Google Scholar
  24. T. D. Gillespie, Fundamentals of Vehicle Dynamics, SAE No. R-114, 1992.
  25. R. F. Chi, Concept Body Intelligentized CAE Analyse—Modal Analyse, Jilin University, jilin china, 2007.
  26. M. L. Guo, Dynamic Mechanical Thermal Analysis of Polymer and Composite Material, Chemical Industry Press, Beijing, China, 2002.
  27. C. Louter, J. Belis, F. Veer, and J.-P. Lebet, “Structural response of SG-laminated reinforced glass beams; experimental investigations on the effects of glass type, reinforcement percentage and beam size,” Engineering Structures, vol. 36, pp. 292–301, 2012. View at Publisher · View at Google Scholar · View at Scopus
  28. Y. M. Yin, Research on Dynamic Viscoelastic Characteristics and Shear Modulus Predicting Methods for Aspgalt Mixtures Based on Dynamic Mechanical Analysis(DMA) Means, South China University of Technology, Guangzhou, China, 2010.