Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 918906, 7 pages
Research Article

Prediction of Three-Dimensional Milling Forces Based on Finite Element

1School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110819, China
2School of Traffic and Mechanical Engineering, Shenyang Jianzhu University, Shenyang 110168, China
3Liaoning Guidaojiaotong Polytechnic Institute, Shenyang, Liaoning 110023, China

Received 15 April 2014; Revised 16 July 2014; Accepted 11 August 2014; Published 28 October 2014

Academic Editor: Charles C. Sorrell

Copyright © 2014 Lida Zhu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Lida Zhu, Chunxia Zhu, Jiaying Pei, Xuebing Li, and Wei Wang, “Prediction of Three-Dimensional Milling Forces Based on Finite Element,” Advances in Materials Science and Engineering, vol. 2014, Article ID 918906, 7 pages, 2014. doi:10.1155/2014/918906