Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 947319, 1 page

Simulation and Optimization in Materials Technology

1Universidad Autonoma de Nuevo Leon, Facultad de Ingenieria Mecanica y Electrica, Avenida Universidad S/N, Cd. Universitaria, CP 66451, San Nicolas de los Garza, NL, Mexico
2Atilim University, Metal Forming Center of Excellence (MFCE), Atilim University Campus, Kizilcasar Mahallesi, 06836 Incek-Golbasi, Ankara, Turkey
3Universidade de Lisboa, Instituto Superior Tecnico, Departmento de Engenharia Mecanica e ICEMS, Avenida Rovisco Pais, 1049-001 Lisboa, Portugal
4University of Nova Gorica, Laboratory for Multiphase Processes, Vipavska 13, 5000 Nova Gorica, Slovenia & Institute of Metals and Technology, Laboratory for Simulation of Materials and Processes, Lepi pot 11, 1000 Ljubljana, Slovenia

Received 11 February 2014; Accepted 11 February 2014; Published 12 March 2014

Copyright © 2014 Martha Guerrero et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Martha Guerrero, Caner Simsir, Augusto Deus, and Bozidar Sarler, “Simulation and Optimization in Materials Technology,” Advances in Materials Science and Engineering, vol. 2014, Article ID 947319, 1 pages, 2014. doi:10.1155/2014/947319