Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 963042, 6 pages
http://dx.doi.org/10.1155/2014/963042
Research Article

Fabrication of Porous and Nanoporous Aluminum via Selective Dissolution of Al-Zn Alloys

1General Engineering Department, University of Puerto Rico, P.O. Box 9000, Mayagüez, PR 00681, USA
2Mechanical Engineering Department, University of Puerto Rico, P.O. Box 9000, Mayagüez, PR 00681, USA
3Theoretical and Applied Mechanics Program, Northwestern University, 633 Clark Street, Evanston, IL, USA
4Chemical Engineering Department, University of Puerto Rico, P.O. Box 9000, Mayagüez, PR 00681, USA

Received 8 March 2014; Revised 12 July 2014; Accepted 12 July 2014; Published 24 August 2014

Academic Editor: Yucel Birol

Copyright © 2014 Oscar Marcelo Suárez et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Qiu, C. Xu, X. Huang, Y. Ding, Y. Qu, and P. Gao, “Immobilization of laccase on nanoporous gold: comparative studies on the immobilization strategies and the particle size effects,” The Journal of Physical Chemistry C, vol. 113, pp. 2521–225, 2009. View at Publisher · View at Google Scholar
  2. R. Zeis, T. Lei, K. Sieradzki, J. Snyder, and J. Erlebacher, “Catalytic reduction of oxygen and hydrogen peroxide by nanoporous gold,” Journal of Catalysis, vol. 253, no. 1, pp. 132–138, 2008. View at Publisher · View at Google Scholar
  3. A. J. Smith, “Skeletal catalysts,” in Surface and Nanomolecular Catalysis, pp. 141–158, CRC Press, Boca Raton, Fla, USA, 2006. View at Google Scholar
  4. B. Xiao and Q. Yuan, “Nanoporous metal organic framework materials for hydrogen storage,” Particuology, vol. 7, no. 2, pp. 129–140, 2009. View at Publisher · View at Google Scholar
  5. J. Weissmüller, R. C. Newman, H.-J. Jin, A. M. Hodge, and J. W. Kysar, “Nanoporous metals by alloy corrosion: formation and mechanical properties,” MRS Bulletin, vol. 34, pp. 577–586, 2009. View at Publisher · View at Google Scholar
  6. M. Hakamada and M. Mabuchi, “Preparation of nanoporous Ni and Ni-Cu by dealloying of rolled Ni-Mn and Ni-Cu-Mn alloys,” Journal of Alloys and Compounds, vol. 485, pp. 583–587, 2009. View at Publisher · View at Google Scholar
  7. M. Hakamada and M. Mabuchi, “Fabrication of nanoporous palladium by dealloying and its thermal coarsening,” Journal of Alloys and Compounds, vol. 479, pp. 326–329, 2009. View at Google Scholar
  8. T. Aburada, J. M. Fitz-Gerald, and J. R. Scully, “Synthesis of nanoporous copper by dealloying of Al-Cu-Mg amorphous alloys in acidic solution: the effect of nickel,” Corrosion Science, vol. 53, no. 5, pp. 1627–1632, 2011. View at Publisher · View at Google Scholar
  9. J. Erlebacher, Dekker Encyclopedia of Nanoscience and Nanotechnology, CRC Press, New York, NY, USA, 2004.