Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2014, Article ID 986928, 16 pages
http://dx.doi.org/10.1155/2014/986928
Research Article

Investigation on Dynamic Recrystallization Behavior of Martensitic Stainless Steel

National Die and Model CAD Engineering Research Center, Shanghai Jiao Tong University, 1954 Huashan Road, Shanghai 200030, China

Received 16 April 2014; Accepted 3 June 2014; Published 9 July 2014

Academic Editor: Pavel Lejcek

Copyright © 2014 Facai Ren et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. Brünger, X. Wang, and G. Gottstein, “Nucleation mechanisms of dynamic recrystallization in austenitic steel alloy 800H,” Scripta Mater, vol. 38, no. 12, pp. 1843–1849, 1998. View at Publisher · View at Google Scholar
  2. E. I. Poliak and J. J. Jonas, “Initiation of dynamic recrystallization in constant strain rate hot deformation,” ISIJ International, vol. 43, no. 5, pp. 684–691, 2003. View at Publisher · View at Google Scholar · View at Scopus
  3. E. I. Poliak and J. J. Jonas, “A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization,” Acta Materialia, vol. 44, no. 1, pp. 127–136, 1996. View at Publisher · View at Google Scholar · View at Scopus
  4. T. Sakai and J. J. Jonas, “Overview no. 35 dynamic recrystallization: mechanical and microstructural considerations,” Acta Metallurgica, vol. 32, no. 2, pp. 189–209, 1984. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Cingara and H. J. McQueen, “New formula for calculating flow curves from high temperature constitutive data for 300 austenitic steels,” Journal of Materials Processing Technology, vol. 36, no. 1, pp. 31–42, 1992. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Najafizadeh and J. J. Jonas, “Predicting the critical stress for initiation of dynamic recrystallization,” ISIJ International, vol. 46, no. 11, pp. 1679–1684, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. H. Mirzadeh and A. Najafizadeh, “Prediction of the critical conditions for initiation of dynamic recrystallization,” Materials and Design, vol. 31, no. 3, pp. 1174–1179, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Mirzadeh, J. M. Cabrera, and A. Najafizadeh, “Modeling and prediction of hot deformation flow curves,” Metallurgical and Materials Transactions A, vol. 43, no. 1, pp. 108–123, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. J. J. Jonas, C. Ghosh, X. Quelennec, and V. V. Basabe, “The critical strain for dynamic transformation in hot deformed austenite,” ISIJ International, vol. 53, no. 1, pp. 145–151, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Solhjoo, “Determination of flow stress and the critical strain for the onset of dynamic recrystallization using a hyperbolic tangent function,” Materials and Design, vol. 54, pp. 390–393, 2014. View at Publisher · View at Google Scholar
  11. H. Mirzadeh, J. M. Cabrera, A. Najafizadeh, and P. R. Calvillo, “EBSD study of a hot deformed austenitic stainless steel,” Materials Science and Engineering A, vol. 538, pp. 236–245, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. M. R. Barnett, G. L. Kelly, and P. D. Hodgson, “Predicting the critical strain for dynamic recrystallization using the kinetics of static recrystallization,” Scripta Materialia, vol. 43, no. 4, pp. 365–369, 2000. View at Publisher · View at Google Scholar · View at Scopus
  13. G. Gottstein, M. Frommert, M. Goerdeler, and N. Schäfer, “Prediction of the critical conditions for dynamic recrystallization in the austenitic steel 800H,” Materials Science and Engineering A, vol. 387-389, no. 1-2, pp. 604–608, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. N. R. Baddoo, “Stainless steel in construction: a review of research, applications, challenges and opportunities,” Journal of Constructional Steel Research, vol. 64, no. 11, pp. 1199–1206, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. B. S. Mann and J. Mater, “Laser treatment of textured X20Cr13 stainless steel to improve water droplet erosion resistance of LPST blades and LP bypass Valves,” Journal of Materials Engineering and Performance, vol. 22, no. 12, pp. 3699–3707, 2013. View at Publisher · View at Google Scholar
  16. ASTM E209, Annual Bood of ASTM Standards, vol. 3, ASTM International, 2010.
  17. ASTM standard E112-88, ASTM, Philadelphia, Pa, USA, 1988.
  18. F. Chen, Z. Cui, and S. Chen, “Recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part I: dynamic recrystallization,” Materials Science and Engineering A, vol. 528, no. 15, pp. 5073–5080, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Chen, Z. S. Cui, D. S. Sui et al., “Recrystallization of 30 Cr2Ni4MoV ultra-super-critical rotor steel during hot deformation. Part III: metadynamic recrystallization,” Materials Science and Engineering A, vol. 540, pp. 46–54, 2012. View at Publisher · View at Google Scholar
  20. A. Dehghan-Manshadi and P. D. Hodgson, “Dynamic recrystallization of austenitic stainless steel under multiple peak flow behaviours,” ISIJ International, vol. 47, no. 12, pp. 1799–1803, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. C. Zener and J. H. Hollomon, “Effect of strain rate upon plastic flow of steel,” Journal of Applied Physics, vol. 15, no. 1, pp. 22–32, 1944. View at Publisher · View at Google Scholar · View at Scopus
  22. H. J. McQueen and N. D. Ryan, “Constitutive analysis in hot working,” Materials Science and Engineering A, vol. 322, no. 1-2, pp. 43–63, 2002. View at Publisher · View at Google Scholar · View at Scopus
  23. H. Mirzadeh, J. M. Cabrera, J. M. Prado, and A. Najafizadeh, “Hot deformation behavior of a medium carbon microalloyed steel,” Materials Science and Engineering A, vol. 528, no. 10-11, pp. 3876–3882, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Shaban and B. Eghbali, “Determination of critical conditions for dynamic recrystallization of a microalloyed steel,” Materials Science and Engineering A, vol. 527, no. 16-17, pp. 4320–4325, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. N. D. Ryan and H. J. McQueen, “Dynamic softening mechanisms in 304 austenitic stainless steel,” Canadian Metallurgical Quarterly, vol. 29, no. 2, pp. 147–162, 1990. View at Publisher · View at Google Scholar · View at Scopus
  26. A. M. Elwazri, P. Wanjara, and S. Yue, “Critical condition for dynamic recrystallisation of high carbon steels,” Materials Science & Technology, vol. 20, no. 11, pp. 1469–1473, 2004. View at Publisher · View at Google Scholar · View at Scopus
  27. L. X. Kong, P. D. Hodgson, and B. Wang, “Development of constitutive models for metal forming with cyclic strain softening,” Journal of Materials Processing Technology, vol. 89-90, pp. 44–50, 1999. View at Publisher · View at Google Scholar · View at Scopus
  28. A. Dehghan-Manshadi, M. R. Barnett, and P. D. Hodgson, “Hot deformation and recrystallization of austenitic stainless steel: part I. dynamic recrystallization,” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 39, no. 6, pp. 1359–1370, 2008. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Laasraoui and J. J. Jonas, “Prediction of steel flow stresses at high temperatures and strain rates,” Metallurgical Transactions A, vol. 22, no. 7, pp. 1545–1558, 1991. View at Publisher · View at Google Scholar · View at Scopus