Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 106424, 16 pages
http://dx.doi.org/10.1155/2015/106424
Research Article

Bending Characteristics of Foldable Touch Display Panel with a Protection Structure Design

1Department of Aerospace and Systems Engineering, Feng Chia University, Taichung 40724, Taiwan
2Department of Power Mechanical Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan
3Display Technology Center, Industrial Technology Research Institute, Chutung 31040, Taiwan

Received 22 September 2014; Revised 8 March 2015; Accepted 10 March 2015

Academic Editor: Zoe Barber

Copyright © 2015 Hsien-Chie Cheng et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J.-M. Park, J.-S. Hong, J.-Y. Yang et al., “Bending effects of indium-zinc oxide thin films deposited on polyethylene terephthalate substrate by radio frequency magnetron sputtering,” Journal of the Korean Physical Society, vol. 48, no. 6, pp. 1530–1533, 2006. View at Google Scholar · View at Scopus
  2. B. Sim, E.-H. Kim, J. Park, and M. Lee, “Highly enhanced mechanical stability of indium tin oxide film with a thin Al buffer layer deposited on plastic substrate,” Surface & Coatings Technology, vol. 204, no. 3, pp. 309–312, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. K. Alzoubi, M. M. Hamasha, S. Lu, and B. Sammakia, “Bending fatigue study of sputtered ITO on flexible substrate,” Journal of Display Technology, vol. 7, no. 11, pp. 593–600, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. D. R. Caims, D. C. Paine, and G. P. Carwford, “The mechanical reliability of sputter-coated indium tin oxide polyester substrates for flexible display and touchscreen applications,” MRS Proceedings, vol. 666, 2001. View at Publisher · View at Google Scholar
  5. J.-S. Oh, Y.-R. Cho, K.-E. Cheon, M. A. Karim, and S. J. Jung, “Failure mechanism of patterned ITO electrodes on flexible substrate under static and dynamic mechanical stresses,” Solid State Phenomena, vol. 124–126, no. 1, pp. 411–414, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. Z. Yu, L. Xiang, W. Xue, and H. Wang, “The bending properties of flexible ITO films,” in Asia Optical Fiber Communication and Optoelectronic Exposition and Conference, pp. 148–150, October 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. P. C. P. Bouten, P. J. Slikkerveer, and Y. Leterrier, “Chapter 6: mechanics of ITO on plastic substrates for flexible,” in Flexible Flat Panel Displays, G. P. Grawford, Ed., p. 117, John Wiley & Sons, Chichester, UK, 2005. View at Google Scholar
  8. M.-K. Yeh, L.-Y. Chang, M.-R. Lu, H.-C. Cheng, and P.-H. Wang, “Bending stress analysis of flexible touch panel,” Microsystem Technologies, vol. 20, no. 8-9, pp. 1641–1646, 2014. View at Publisher · View at Google Scholar
  9. G. A. Kardomateas, “Snap buckling of delaminated composites under pure bending,” Composites Science and Technology, vol. 39, no. 1, pp. 63–74, 1990. View at Publisher · View at Google Scholar · View at Scopus
  10. C. Lim, J. Park, Y. Kim, and J. Han, “Mechanical and electrical stability indium-tin-oxide coated polymer substrates under continuous bending stress condition,” Journal of International Council on Electrical Engineering, vol. 2, no. 3, pp. 237–241, 2014. View at Publisher · View at Google Scholar
  11. B. Cotterell and Z. Chen, “Buckling and cracking of thin films on compliant substrates under compression,” International Journal of Fracture, vol. 104, no. 2, pp. 169–179, 2000. View at Publisher · View at Google Scholar · View at Scopus
  12. H.-H. Yu and J. W. Hutchinson, “Influence of substrate compliance on buckling delamination of thin films,” International Journal of Fracture, vol. 113, pp. 39–55, 2002. View at Google Scholar
  13. M. D. Thouless, “Combined buckling and cracking of films,” Journal of the American Ceramic Society, vol. 76, no. 11, pp. 2936–2938, 1993. View at Publisher · View at Google Scholar · View at Scopus
  14. Q. Chen, L. Xu, A. Salo, G. Neto, and G. Freitas, “Reliability study of flexible display module by experiments,” in Proceedings of the International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP '08), pp. 1–6, Shanghai, July 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. W.-H. Chen, H.-C. Cheng, Y.-C. Hsu, R.-H. Uang, and J.-S. Hsu, “Mechanical material characterization of Co nanowires and their nanocomposite,” Composites Science and Technology, vol. 68, no. 15-16, pp. 3388–3395, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. C. Y. Cao, Q.-H. Qin, and A. B. Yu, “Micromechanical analysis of heterogeneous composites using hybrid trefftz FEM and hybrid fundamental solution based FEM,” Journal of Mechanics, vol. 29, no. 4, pp. 661–674, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. S. J. Hollister, D. P. Fyhrie, K. J. Jepsen, and S. A. Goldstein, “Application of homogenization theory to the study of trabecular bone mechanics,” Journal of Biomechanics, vol. 24, no. 9, pp. 825–839, 1991. View at Publisher · View at Google Scholar · View at Scopus
  18. R. Hill, “A self-consistent mechanics of composite materials,” Journal of the Mechanics and Physics of Solids, vol. 13, no. 4, pp. 213–222, 1965. View at Publisher · View at Google Scholar · View at Scopus
  19. G. Taguchi, Taguchi Methods: Signal-to-Noise Ratio for Quality Evaluation, Quality Engineering Series, ASI Press, Trevose, Pa, USA, 1993.
  20. H.-C. Cheng, W.-R. Ciou, W.-H. Chen, J.-L. Kuo, H.-C. Lu, and R.-B. Wu, “Heat dissipation analysis and design of a board-level phased-array transmitter module for 60-GHz communication,” Applied Thermal Engineering, vol. 53, no. 1, pp. 78–88, 2013. View at Publisher · View at Google Scholar · View at Scopus
  21. W. C. Oliver and G. M. Pharr, “Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” Journal of Materials Research, vol. 7, no. 6, pp. 1564–1580, 1992. View at Publisher · View at Google Scholar · View at Scopus