Research Article
Preparation of U–Zr–Mn, a Surrogate Alloy for Recycling Fast Reactor Fuel
Table 1
Experimental parameters for injection casting of Cu and U–10Zr–5Mn fuel slugs.
| | Test | Test | Test | Test | Test | Test | Test |
| Charge alloy composition (wt%) | Cu | Cu | Cu | Cu | U–10Zr–5Mn | U–10Zr–5Mn | U–10Zr–5Mn |
| Casting temperature (°C) | 1160 | 1160 | 1120 | 1120 | 1530 | 1450 | 1450 |
| Injection pressure (kgf/cm2) | 0.8 | 0.8 | 0.8 | 0.8 | 2.5 | 3.4 | 3.4 |
| Chamber atmosphere before injection | Dynamic vacuum condition | Dynamic vacuum condition | Dynamic vacuum condition | Dynamic vacuum condition | Dynamic vacuum condition | Ar (400 Torr) | Ar (600 Torr) |
| Holding time (sec.) | 2 | 2 | 2 | 2 | 4 | 2 | 2 |
| Emerging time (sec.) | 18 | 18 | 18 | 10 | 5 | 5 | 5 |
|
|