Research Article
Experimental and Numerical Method for the Analysis of Warm Titanium Sheet Stamping of an Automotive Component
Table 1
Process parameters.
| | 20°C | 300°C |
| Material properties | | | Sheet | Ti CP GR.2 annealed – 1 mm | Dimensions [mm] | Nakazima: (width) | 12–36–84 100–132–150 | | Stamping: | ⌀360 | Young Module [GPa] | 106 | 88 | Flow stress
| = 640 = 0.12 | = 204 = 0.13 | Failure criterion | FLC |
| Process | | | [mm/s] | 40 | BHF [kN] | 20 | 5 |
| Sheet friction | | Contact with punch = | 0.12 | 0.45 | Other contacts = | 0.12 | 0.35 |
|
|