Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015 (2015), Article ID 148657, 6 pages
http://dx.doi.org/10.1155/2015/148657
Research Article

Microstructure and Mechanical Property of Hot-Pressed Al2O3-Ni-P Composites Using Ni-P-Coated Al2O3 Powders

1Department of Mechanical Engineering, University of Incheon, 12-1 Songdo-dong, Yeonsu-gu, Incheon 406-772, Republic of Korea
2Technology Convergence Center, Incheon Techno Park, Gaetbeol-ro 12, Songdo-dong, Yeonsu-gu, Incheon 406-840, Republic of Korea

Received 18 September 2015; Revised 11 December 2015; Accepted 14 December 2015

Academic Editor: Wenbin Yi

Copyright © 2015 Hyeong-Chul Kim and Jae-Kil Han. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Hyeong-Chul Kim and Jae-Kil Han, “Microstructure and Mechanical Property of Hot-Pressed Al2O3-Ni-P Composites Using Ni-P-Coated Al2O3 Powders,” Advances in Materials Science and Engineering, vol. 2015, Article ID 148657, 6 pages, 2015. doi:10.1155/2015/148657