Hot Embossing of Zr-Based Bulk Metallic Glass Micropart Using Stacked Silicon Dies

<table class="table-group" id="tab1"><tr><td><table class="table"><tr><td class="thead-hr" colspan="7"><hr/></td></tr><tr><td align="left">Processing temperature (K)</td><td align="center">683</td><td align="center">693</td><td align="center">703</td><td align="center">713</td><td align="center">723</td><td align="center">733</td></tr><tr><td align="center" colspan="7"><hr/></td></tr><tr><td align="left">Incubation time (min)</td><td align="center">46.3</td><td align="center">29.6</td><td align="center">7.92</td><td align="center">3.57</td><td align="center">1.67</td><td align="center">1.00</td></tr><tr class="table-tr"><td colspan="7"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

Incubation time of Zr<sub>65</sub>Cu<sub>17.5</sub>Ni<sub>10</sub>Al<sub>7.5</sub> under different processing temperature.

Advances in Materials Science and Engineering

tab1

Table 1

Table 1: Hot Embossing of Zr-Based Bulk Metallic Glass Micropart Using Stacked Silicon Dies 