Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 201289, 18 pages
http://dx.doi.org/10.1155/2015/201289
Research Article

The Experimental Studies on Behavior of Ultrahigh-Performance Concrete Confined by Hybrid Fiber-Reinforced Polymer Tubes

College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100124, China

Received 19 October 2014; Revised 23 February 2015; Accepted 23 February 2015

Academic Editor: Dachamir Hotza

Copyright © 2015 Zong-cai Deng and Jiu-ling Qu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. L. Voo, S. J. Foster, and R. I. Gilbert, “Shear strength of fiber reinforced reactive powder concrete prestressed girders without stirrups,” Journal of Advanced Concrete Technology, vol. 4, no. 1, pp. 123–132, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. T. Ozbakkaloglu, “Axial compressive behavior of square and rectangular high-strength concrete-filled FRP tubes,” Journal of Composites for Construction, vol. 17, no. 1, pp. 151–161, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. T. Ozbakkaloglu, “Compressive behavior of concrete-filled FRP tube columns: assessment of critical column parameters,” Engineering Structures, vol. 51, pp. 188–199, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. L. de Lorenzis and R. Tepfers, “Comparative study of models on confinement of concrete cylinders with fiber-reinforced polymer composites,” Journal of Composites for Construction, vol. 7, no. 3, pp. 219–237, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. B. Binici, “An analytical model for stress–strain behavior of confined concrete,” Engineering Structures, vol. 27, no. 7, pp. 1040–1051, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. L. A. Bisby, A. J. S. Dent, and M. F. Green, “Comparison of confinement models for fiber-reinforced polymer-wrapped concrete,” ACI Structural Journal, vol. 102, no. 1, pp. 62–72, 2005. View at Google Scholar · View at Scopus
  7. M. N. Youssef, M. Q. Feng, and A. S. Mosallam, “Stress-strain model for concrete confined by FRP composites,” Composites Part B: Engineering, vol. 38, no. 5-6, pp. 614–628, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Mirmiran, M. Shahawy, M. Samaan, H. El Echary, J. C. Mastrapa, and O. Pico, “Effect of column parameters on FRP-confined concrete,” Journal of Composites for Construction, vol. 2, no. 4, pp. 175–185, 1998. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Saafi, H. A. Toutanji, and Z. Li, “Behavior of concrete columns confined with fiber reinforced polymer tubes,” ACI Materials Journal, vol. 96, no. 4, pp. 500–509, 1999. View at Google Scholar · View at Scopus
  10. A. Z. Fam and S. H. Rizkalla, “Behavior of axially loaded concrete-filled circular fiber-reinforced polymer tubes,” ACI Structural Journal, vol. 98, no. 3, pp. 280–289, 2001. View at Google Scholar · View at Scopus
  11. W.-K. Kong and H.-C. Kim, “Behavior of concrete columns confined by carbon composite tubes,” Canadian Journal of Civil Engineering, vol. 31, no. 2, pp. 178–188, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. H. A. Toutanji, “Stress-strain characteristics of concrete columns externally confined with advanced fiber composite sheets,” ACI Materials Journal, vol. 96, no. 3, pp. 397–404, 1999. View at Google Scholar · View at Scopus
  13. S. H. Ahmad and S. P. Khaloo, “Stress-strain curves of concrete confined by spiral reinforcement,” ACI Materials Journal, vol. 79, no. 6, pp. 484–490, 1982. View at Google Scholar
  14. E. Hognestad, A Study of Combined Bending and Axial Load in Reinforced Concrete Members, University of Illinois Engineering Experiment Station, Bulletin Series no. 399, University of Illinois, Urbana, Ill, USA, 1951.
  15. R. M. Richard and B. J. Abbottt, “Versatile elastic-plastic stress-strain formula,” ASCE Journal of the Engineering Mechanics Division, vol. 101, no. 4, pp. 511–515, 1975. View at Google Scholar
  16. D. A. Moran and C. P. Pantelides, “Stress-strain model for fiber-reinforced polymer-confined concrete,” Journal of Composites for Construction, vol. 6, no. 4, pp. 233–240, 2002. View at Publisher · View at Google Scholar · View at Scopus
  17. Z. Yan and C. P. Pantelides, “Design-oriented model for concrete columns confined with bonded FRP jackets or post-tensioned FRP shells,” in Proceedings of the 8th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, University of Patras, Patras, Greece, 2007.
  18. M. Samaan, A. Mirmiran, and M. Shahawy, “Model of concrete confined by fiber composites,” Journal of Structural Engineering, vol. 124, no. 9, pp. 1025–1031, 1998. View at Publisher · View at Google Scholar · View at Scopus
  19. L. Lam and J. G. Teng, “Design-oriented stress-strain model for FRP-confined concrete,” Construction and Building Materials, vol. 17, no. 6-7, pp. 471–489, 2003. View at Publisher · View at Google Scholar · View at Scopus
  20. H. Saadatmanesh, M. R. Ehsani, and M. W. Li, “Strength and ductility of concrete columns externally reinforced with fiber composite straps,” ACI Structural Journal, vol. 91, no. 4, pp. 434–447, 1994. View at Google Scholar · View at Scopus
  21. J. C. Lim and T. Ozbakkaloglu, “Confinement model for FRP-confined high-strength concrete,” Journal of Composites for Construction, vol. 18, no. 4, pp. 2–19, 2014. View at Google Scholar
  22. K. Miyauchi, S. Inoue, T. Kuroda, and A. Kobayashi, “Strengthening effects with carbon fiber sheet for concrete column,” Proceedings of the Japan Concrete Institute, vol. 21, no. 3, pp. 1453–1458, 1999. View at Google Scholar
  23. S. Mandal, A. Hoskin, and A. Fam, “Influence of concrete strength on confinement effectiveness of fiber-reinforced polymer circular jackets,” ACI Structural Journal, vol. 102, no. 3, pp. 383–392, 2005. View at Google Scholar · View at Scopus
  24. J. F. Berthet, E. Ferrier, and P. Hamelin, “Compressive behavior of concrete externally confined by composite jackets. Part B: modeling,” Construction and Building Materials, vol. 20, no. 5, pp. 338–347, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. C. Cui and S. A. Sheikh, “Analytical model for circular normal- and high-strength concrete columns confined with FRP,” Journal of Composites for Construction, vol. 14, no. 5, pp. 562–572, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. Q. G. Xiao, J. G. Teng, and T. Yu, “Behavior and modeling of confined high-strength concrete,” Journal of Composites for Construction, vol. 14, no. 3, pp. 249–259, 2010. View at Publisher · View at Google Scholar
  27. T. M. Pham and M. N. S. Hadi, “Confinement model for FRP confined normal- and high-strength concrete circular columns,” Construction and Building Materials, vol. 69, pp. 83–90, 2014. View at Publisher · View at Google Scholar
  28. R. Xiao, Z.-C. Deng, and C. L. Shen, “Properties of ultra high performance concrete containing superfine cement and without silica fume,” Journal of Advanced Concrete Technology, vol. 12, no. 2, pp. 73–81, 2014. View at Publisher · View at Google Scholar · View at Scopus
  29. G. Fischer, H. Fukuyama, and V. C. Li, “Effect of matrix ductility on the performance of reinforced ECC column members under reversed cyclic loading conditions,” in Proceedings of the JCI International Workshop on Ductile Fiber Reinforced Cementitious Composites: Application and Evaluation (DRFCC '02), pp. 269–278, Advanced Civil Engineering-Materials Research Laboratory, University of Michigan, Ann Arbor, Mich, USA, 2002.
  30. S. L. Billington and J. Yoon, “Cyclic behavior of precast post-tensioned segmental concrete columns with ECC,” in Proceedings of the JCI International Workshop on Ductile Fiber Reinforced Cementitious Composites (DFRCC): Application and Evaluation (DFRCC-2002), Takayama, Japan, October 2002, pp. 279–288, Japan Concrete Institute, 2002. View at Google Scholar
  31. P. Zohrevand and A. Mirmiran, “Behavior of ultra-high performance concrete confined by fiber-reinforced polymers,” Journal of Materials in Civil Engineering, vol. 23, no. 12, pp. 1727–1734, 2011. View at Publisher · View at Google Scholar · View at Scopus
  32. P. Zohrevand and A. Mirmiran, “Cyclic behavior of hybrid columns made of ultra-high performance concrete and fiber reinforced polymers,” Journal of Composites for Construction, vol. 16, no. 1, pp. 91–99, 2012. View at Publisher · View at Google Scholar · View at Scopus
  33. J.-G. Dai, Y.-L. Bai, and J. G. Teng, “Behavior and modeling of concrete confined with FRP composites of large deformability,” Journal of Composites for Construction, vol. 15, no. 6, pp. 963–973, 2011. View at Publisher · View at Google Scholar · View at Scopus
  34. Z. C. Deng and J. H. Li, “Hybrid fiber reinforced plastics and properties for strengthening concrete structures,” Fiber Reinforced Plastics/Composites, vol. 4, no. 1, pp. 50–54, 2006 (Chinese). View at Google Scholar
  35. J. G. Teng, T. Jiang, L. Lam, and Y. Z. Luo, “Refinement of a design-oriented stress-strain model for FRP-confined concrete,” Journal of Composites for Construction, vol. 13, no. 4, pp. 269–278, 2009. View at Publisher · View at Google Scholar · View at Scopus