Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 278293, 13 pages
http://dx.doi.org/10.1155/2015/278293
Research Article

Flexural Behavior of Prestressed Steel-Concrete Composite Members with Discontinuous Webs

Department of Architectural Engineering, University of Seoul, 90 Jeonnong-dong, Dongdaemun-gu, Seoul 130-743, Republic of Korea

Received 1 April 2015; Accepted 28 May 2015

Academic Editor: Ana S. Guimarães

Copyright © 2015 Jae Yuel Oh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. G. Driver, H. H. Abbas, and R. Sause, “Shear behavior of corrugated web bridge girders,” Journal of Structural Engineering, vol. 132, no. 2, pp. 195–203, 2006. View at Publisher · View at Google Scholar · View at Scopus
  2. R. Sause, H. Abbas, B.-G. Kim, and R. Driver, “Innovative high performance steel bridge girders,” in Proceedings of the Structures Congress and Exposition, Structures, ASCE, Reston, Va, USA, May 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. R. Sause, H. Abbas, B.-G. Kim, R. Driver, and A. Smith, “Innovative high performance steel girders for highway bridges,” in Proceedings of the Conference on High Performance Materials in Bridges and Buildings, pp. 309–318, Kona, Hawaii, 2001. View at Scopus
  4. J. T. Easley, “Buckling formulas for corrugated metal shear diaphragms,” Journal of the Structural Division, vol. 101, no. 7, pp. 1403–1417, 1975. View at Google Scholar · View at Scopus
  5. R. Luo and B. Edlund, “Buckling analysis of trapezoidally corrugated panels using spline finite strip method,” Thin-Walled Structures, vol. 18, no. 3, pp. 209–224, 1994. View at Publisher · View at Google Scholar · View at Scopus
  6. H. H. Abbas, R. Sause, and R. G. Driver, “Analysis of flange transverse bending of corrugated web I-girders under in-plane loads,” Journal of Structural Engineering, vol. 133, no. 3, pp. 347–355, 2007. View at Google Scholar · View at Scopus
  7. Y. A. Khalid, C. L. Chan, B. B. Sahari, and A. M. S. Hamouda, “Bending behaviour of corrugated web beams,” Journal of Materials Processing Technology, vol. 150, no. 3, pp. 242–254, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Mirghaderi, S. Sobhan, and S. Torabian, “Reducing beam section by corrugated webs for developing a connection of specially moment resisting frame,” in Proceedings of the Structures Congress 2008: Crossing Borders, pp. 1–10, ASCE, Vancouver, Canada, April 2008. View at Publisher · View at Google Scholar
  9. K. S. Kim, D. H. Lee, S. M. Choi, Y. H. Choi, and S. H. Jung, “Flexural behavior of prestressed composite beams with corrugated web: Part I. Development and analysis,” Composites Part B: Engineering, vol. 42, no. 6, pp. 1603–1616, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. J.-Y. Oh, D. H. Lee, and K. S. Kim, “Accordion effect of prestressed steel beams with corrugated webs,” Thin-Walled Structures, vol. 57, pp. 49–61, 2012. View at Publisher · View at Google Scholar · View at Scopus
  11. K. S. Kim and D. H. Lee, “Flexural behavior of prestressed composite beams with corrugated web. Part II. Experiment and verification,” Composites Part B: Engineering, vol. 42, no. 6, pp. 1617–1629, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. D. H. Lee, J. Y. Oh, H. Kang, K. S. Kim, H. J. Kim, and H. Y. Kim, “Structural performance of prestressed composite girders with corrugated steel plate webs,” Journal of Constructional Steel Research, vol. 104, pp. 9–21, 2015. View at Publisher · View at Google Scholar
  13. S. E. Kim and H. T. Nguyen, “Finite element modeling and analysis of a hybrid steel-PSC beam connection,” Engineering Structures, vol. 32, no. 9, pp. 2557–2569, 2010. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Hibbitt, B. Karlsson, and P. Sorensen, Abaqus Analysis Users Manual, Version 6.10, Dassault Systèmes Simulia, Providence, RI, USA, 2011.
  15. M. P. Collins and D. Mitchell, Prestressed Concrete Structures, Prentice Hall, Englewood Cliffs, NJ, USA, 1991.
  16. H. Kupfer, H. K. Hilsdorf, and H. Rusch, “Behavior of concrete under biaxial stresses,” ACI Journal Proceedings, vol. 66, no. 8, pp. 656–666, 1969. View at Publisher · View at Google Scholar
  17. A. A. Arab, S. S. Badie, and M. T. Manzari, “A methodological approach for finite element modeling of pretensioned concrete members at the release of pretensioning,” Engineering Structures, vol. 33, no. 6, pp. 1918–1929, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. F. J. Vecchio and M. P. Collins, “The modified compression-field theory for reinforced concrete elements subjected to shear,” ACI Journal Proceedings, vol. 83, no. 2, 1986. View at Google Scholar