Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015 (2015), Article ID 278296, 18 pages
http://dx.doi.org/10.1155/2015/278296
Research Article

Durability and Shrinkage Characteristics of Self-Compacting Concretes Containing Recycled Coarse and/or Fine Aggregates

1Department of Civil Engineering, Gaziantep University, 27310 Gaziantep, Turkey
2Department of Civil Engineering, Nigde University, 51240 Nigde, Turkey
3Department of Civil Engineering, University of Technology, Baghdad, Iraq

Received 6 May 2015; Accepted 16 July 2015

Academic Editor: Rui Vilar

Copyright © 2015 Mehmet Gesoglu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. P. Koehler and D. W. Fowler, Aggregates in Self-Consolidating Concrete. Final Report ICAR Project 108: Aggregates in Self-Consolidating Concrete, International Center for Aggregates Research (ICAR), 2007.
  2. Z. J. Grdic, G. A. Toplicic-Curcic, I. M. Despotovic, and N. S. Ristic, “Properties of self-compacting concrete prepared with coarse recycled concrete aggregate,” Construction and Building Materials, vol. 24, no. 7, pp. 1129–1133, 2010. View at Publisher · View at Google Scholar · View at Scopus
  3. K. C. Panda and P. K. Bal, “Properties of self compacting concrete using recycled coarse aggregate,” Procedia Engineering, vol. 51, pp. 159–164, 2013. View at Publisher · View at Google Scholar
  4. EFNARC, European Guidelines for Self-Compacting Concrete, Specification and Production and Use, Association House, London, UK, 2005.
  5. M. Gesoǧlu, E. Güneyisi, and H. Ö. Öz, “Properties of lightweight aggregates produced with cold-bonding pelletization of fly ash and ground granulated blast furnace slag,” Materials and Structures, vol. 45, no. 10, pp. 1535–1546, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. M. D. Safiuddin, M. A. Salam, and M. Z. Jumaat, “Effects of recycled concrete aggregate on the fresh properties of self-consolidating concrete,” Archives of Civil and Mechanical Engineering, vol. 11, no. 4, pp. 1023–1041, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. S. C. Kou and C. S. Poon, “Properties of self-compacting concrete prepared with coarse and fine recycled concrete aggregates,” Cement and Concrete Composites, vol. 31, no. 9, pp. 622–627, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. E. Güneyisi, M. Gesoǧlu, Z. Algin, and H. Yazici, “Effect of surface treatment methods on the properties of self-compacting concrete with recycled aggregates,” Construction and Building Materials, vol. 64, pp. 172–183, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. T. C. Hansen, “Physical structure of hardened cement paste. A classical approach,” Materials and Structures, vol. 19, no. 6, pp. 423–436, 1986. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Katz, “Properties of concrete made with recycled aggregate from partially hydrated old concrete,” Cement and Concrete Research, vol. 33, no. 5, pp. 703–711, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. R. K. Dhir, M. C. Limbachiya, and T. Leelawat, “Suitability of recycled concrete aggregate for use in BS 5328 designated mixes,” Proceedings of the Institution of Civil Engineers, vol. 134, no. 3, pp. 257–274, 1999. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Salau, E. Ikponmwosa, and A. Adeyemo, “Shrinkage deformation of concrete containing recycled coarse aggregate,” British Journal of Applied Science & Technology, vol. 4, no. 12, pp. 1791–1807, 2014. View at Publisher · View at Google Scholar
  13. J. M. Soberón, “Shrinkage of concrete with replacement of aggregate with recycled concrete aggregate,” in Proceedings of the 5th ACI International Conference on Innovations in Design with Emphasis on Seismic, Wind and Environmental Loading; Quality Control and Innovations in Materials/Hot-Weather Concreting, pp. 475–495, Cancún, Mexico, 2002.
  14. H. Matsushita and C. T. Tsuruta, “Experimental studies on compressive strength and drying shrinkage of recycled aggregate concrete,” in Proceedings of the International Seminar on Recycled Concrete, pp. 69–78, Niigata University and Japan Concrete Institute (JCI), 2000.
  15. T. Yamato, M. Soeda, and Y. Emoto, “Physical properties of recycled aggregate and the utilization as concrete aggregate,” in Proceedings of the International Seminar on Recycled Concrete, pp. 59–68, Niigata University, Japan Concrete Institute, 2000.
  16. E. Güneyisi, M. Gesoğlu, S. Karaoğlu, and K. Mermerdaş, “Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes,” Construction and Building Materials, vol. 34, pp. 120–130, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. W. A. Al-Khaja, “Strength and time-dependent deformations of silica fume concrete for use in Bahrain,” Construction and Building Materials, vol. 8, no. 3, pp. 169–172, 1994. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Li and Y. Yao, “A study on creep and drying shrinkage of high performance concrete,” Cement and Concrete Research, vol. 31, no. 8, pp. 1203–1206, 2001. View at Publisher · View at Google Scholar · View at Scopus
  19. Turkish Standards, “Cement-part 1: composition, specifications and conformity criteria for common cements,” TS EN 197-1, 2002. View at Google Scholar
  20. ITS, “Aggregates for concrete,” Tech. Rep. TS 706 EN 12620-A1, Institute of Turkish Standards, Ankara, Turkey, 2009. View at Google Scholar
  21. ASTM International, ASTM C 127. Standard Test Method for Specific Gravity and Absorption of Coarse Aggregate, Annual Book of ASTM Standards, ASTM International, West Conshohocken, Pa, USA, 2007.
  22. ASTM, “Standard practice for making and curing concrete test specimens in the laboratory,” ASTM C 192, Annual Book of ASTM Standards, 2007. View at Google Scholar
  23. E. Güneyisi, M. Gesoğlu, and E. Booya, “Fresh properties of self-compacting cold bonded fly ash lightweight aggregate concrete with different mineral admixtures,” Materials and Structures, vol. 45, pp. 1849–1859, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. V. Corinaldesi and G. Moriconi, “Influence of mineral additions on the performance of 100% recycled aggregate concrete,” Construction and Building Materials, vol. 23, no. 8, pp. 2869–2876, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. M. Safiuddin, U. J. Alengaram, M. A. Salam, M. Z. Jumaat, F. F. Jaafar, and H. B. Saad, “Properties of high-workability concrete with recycled concrete aggregate,” Materials Research, vol. 14, no. 2, pp. 248–255, 2011. View at Publisher · View at Google Scholar · View at Scopus
  26. ASTM, “Standard test method for electrical indication of concrete's ability to resist chloride ion penetration,” ASTM C1202, 2009. View at Google Scholar
  27. A. Kanellopoulos, D. Nicolaides, and M. F. Petrou, “Mechanical and durability properties of concretes containing recycled lime powder and recycled aggregates,” Construction and Building Materials, vol. 53, pp. 253–259, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. RILEM, “TC 116-PCD. Permeability of concrete as a criterion of its durability,” Materials and Structures, vol. 32, pp. 174–179, 1999. View at Google Scholar
  29. Institute of Turkish Standards Testing, “Hardened concrete-part 8: depth of penetration of water under pressure,” TS EN 12390-8, Institute of Turkish Standards Testing, Ankara, Turkey, 2002. View at Google Scholar
  30. ASTM International, ASTM C157, Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, Annual Book of ASTM Standards, ASTM International, West Conshohocken, Pa, USA, 2007.
  31. K. Wiegrink, S. Marikunte, and S. P. Shah, “Shrinkage cracking of high-strength concrete,” ACI Materials Journal, vol. 93, no. 5, pp. 409–415, 1996. View at Google Scholar · View at Scopus
  32. S. P. Shah, M. E. Karaguler, and M. Sarigaphuti, “Effects of shrinkage-reducing admixtures on restrained shrinkage cracking of concrete,” ACI Materials Journal, vol. 89, no. 3, pp. 289–295, 1992. View at Publisher · View at Google Scholar · View at Scopus
  33. P. Suvash and Z. Gideon, “Mechanical and durability properties of recycled concrete aggregate for normal strength structural concrete,” International Journal of Sustainable Construction Engineering & Technology, vol. 4, no. 1, pp. 89–103, 2013. View at Google Scholar
  34. M.-H. Zhang, L. Li, and P. Paramasivam, “Shrinkage of high-strength lightweight aggregate concrete exposed to dry environment,” ACI Materials Journal, vol. 102, no. 2, pp. 86–92, 2005. View at Google Scholar · View at Scopus
  35. C. Sumanth, K. Ratna, and P. Rathish, “Mechanical and durability properties of self-compacting concrete with recycled concrete aggregates,” International Journal of Scientific & Engineering Research, vol. 4, no. 5, pp. 260–264, 2013. View at Google Scholar
  36. C. Tasdemir, M. A. Tasdemir, N. Mills, B. I. G. Barr, and F. D. Lydon, “Combined effects of silica fume, aggregate type, and size on postpeak response of concrete in bending,” ACI Materials Journal, vol. 96, no. 1, pp. 74–83, 1999. View at Google Scholar · View at Scopus
  37. S. Y. N. Chan and X. Ji, “Water sorptivity and chloride diffusivity of oil shale ash concrete,” Construction and Building Materials, vol. 12, no. 4, pp. 177–183, 1998. View at Publisher · View at Google Scholar · View at Scopus
  38. P. Chindaprasirt, C. Chotithanorm, H. T. Cao, and V. Sirivivatnanon, “Influence of fly ash fineness on the chloride penetration of concrete,” Construction and Building Materials, vol. 21, no. 2, pp. 356–361, 2007. View at Publisher · View at Google Scholar · View at Scopus
  39. E. Özbay, Effects of mineral admixtures on the fresh and hardened properties of self compacting concretes: binary, ternary and quaternary systems [Ph.D. thesis], 2007.
  40. F. Wang and S. Li, “Effect of silica fume on workability and water impermeability of concrete,” Applied Mechanics and Materials, vol. 238, pp. 157–160, 2012. View at Publisher · View at Google Scholar · View at Scopus
  41. A. Neville, Concrete Neville's Insights and Issues, Thomas Telford Publishing, 2006.
  42. M. Gesoğlu, T. Özturan, and E. Güneyisi, “Shrinkage cracking of lightweight concrete made with cold-bonded fly ash aggregates,” Cement and Concrete Research, vol. 34, no. 7, pp. 1121–1130, 2004. View at Publisher · View at Google Scholar · View at Scopus
  43. O. Kayali, M. N. Haque, and B. Zhu, “Drying shrinkage of fibre-reinforced lightweight aggregate concrete containing fly ash,” Cement and Concrete Research, vol. 29, no. 11, pp. 1835–1840, 1999. View at Publisher · View at Google Scholar · View at Scopus
  44. S. P. Shah, M. E. Karaguler, and M. Sarigaphuti, “Effects of shrinkage-reducing admixtures on restrained shrinkage cracking of concrete,” ACI Materials Journal, vol. 89, no. 3, pp. 289–295, 1992. View at Google Scholar · View at Scopus
  45. A. M. Neville and J. J. Brooks, Concrete Technology, Longman Scientific and Technical, Essex, UK, 1987.
  46. D. Bentz and W. Weiss, “Internal curing: a 2010 state-of-the-art review,” NISTIR 7765, National Institute of Standards and Technology, 2011. View at Google Scholar
  47. D. P. Bentz, “Influence of internal curing using lightweight aggregates on interfacial transition zone percolation and chloride ingress in mortars,” Cement and Concrete Composites, vol. 31, no. 5, pp. 285–289, 2009. View at Publisher · View at Google Scholar · View at Scopus