Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 317561, 9 pages
http://dx.doi.org/10.1155/2015/317561
Research Article

The Effects of Various Additive Components on the Sound Absorption Performances of Polyurethane Foams

1State Key Laboratory of Automotive Simulation and Control, Jilin University, Changchun 130022, China
2College of Automobile Engineering, Jilin University, No. 5988 Renmin Street, Changchun 130022, China

Received 4 December 2014; Revised 18 February 2015; Accepted 27 February 2015

Academic Editor: Abbas S. Milani

Copyright © 2015 Shuming Chen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Lee, G.-H. Kim, and C.-S. Ha, “Sound absorption properties of polyurethane/nano-silica nanocomposite foams,” Journal of Applied Polymer Science, vol. 123, no. 4, pp. 2384–2390, 2012. View at Publisher · View at Google Scholar · View at Scopus
  2. R. Rodriguez, M. Estevez, S. Vargas, M. Gonzalez, R. Salazar, and F. Pacheco, “Synthesis and characterization of HAp-based porous materials,” Materials Letters, vol. 63, no. 17, pp. 1558–1561, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. N. N. Najib, Z. M. Ariff, A. A. Bakar, and C. S. Sipaut, “Correlation between the acoustic and dynamic mechanical properties of natural rubber foam: effect of foaming temperature,” Materials & Design, vol. 32, no. 2, pp. 505–511, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. L. Jaouen, A. Renault, and M. Deverge, “Elastic and damping characterizations of acoustical porous materials: available experimental methods and applications to a melamine foam,” Applied Acoustics, vol. 69, no. 12, pp. 1129–1140, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. J. P. Arenas and M. J. Crocker, “Recent trends in porous sound-absorbing materials,” Sound and Vibration, vol. 44, no. 7, pp. 12–17, 2010. View at Google Scholar · View at Scopus
  6. C. J. da Silveira Brizon and E. Bauzer Medeiros, “Combining subjective and objective assessments to improve acoustic comfort evaluation of motor cars,” Applied Acoustics, vol. 73, no. 9, pp. 913–920, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. L. J. Gibson, “Cellular solids,” MRS Bulletin, vol. 28, no. 4, pp. 270–274, 2003. View at Publisher · View at Google Scholar · View at Scopus
  8. Z. Lv, X. Li, and X. Yu, “The effect of chain extension method on the properties of polyurethane/SiO2 composites,” Materials and Design, vol. 35, pp. 358–362, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. X. Wang, J. Eisenbrey, M. Zeitz, and J. Q. Sun, “Multi-stage regression analysis of acoustical properties of polyurethane foams,” Journal of Sound and Vibration, vol. 273, no. 4-5, pp. 1109–1117, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. I. O. Bakare, F. E. Okieimen, C. Pavithran, H. P. S. Abdul Khalil, and M. Brahmakumar, “Mechanical and thermal properties of sisal fiber-reinforced rubber seed oil-based polyurethane composites,” Materials & Design, vol. 31, no. 9, pp. 4274–4280, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. R. Verdejo, R. Stämpfli, M. Alvarez-Lainez et al., “Enhanced acoustic damping in flexible polyurethane foams filled with carbon nanotubes,” Composites Science and Technology, vol. 69, no. 10, pp. 1564–1569, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Andersson, S. Lundmark, A. Magnusson, and F. H. J. Maurer, “Vibration and acoustic damping of flexible polyurethane foams modified with a hyperbranched polymer,” Journal of Cellular Plastics, vol. 46, no. 1, pp. 73–93, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. Z. Hong, L. Bo, and H. Guangsu, “Sound absorption behavior of multiporous hollow polymer micro-spheres,” Materials Letters, vol. 60, no. 29-30, pp. 3451–3456, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. J.-H. Lin, C.-M. Lin, C.-C. Huang, C.-C. Lin, C.-T. Hsieh, and Y.-C. Liao, “Evaluation of the manufacture of sound absorbent sandwich plank made of PET/TPU honeycomb grid/PU foam,” Journal of Composite Materials, vol. 45, no. 13, pp. 1355–1362, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. N. R. A. Norzali, K. H. Badri, and M. Z. Nuawi, “Loading effect of aluminum hydroxide onto the mechanical, thermal conductivity, acoustical and burning properties of the palm-based polyurethane composites,” Sains Malaysiana, vol. 40, no. 7, pp. 737–742, 2011. View at Google Scholar · View at Scopus
  16. X. L. Wang and T. J. Lu, “Optimized acoustic properties of cellular solids,” The Journal of the Acoustical Society of America, vol. 106, no. 2, pp. 756–765, 1999. View at Publisher · View at Google Scholar · View at Scopus
  17. M. A. Biot, “Theory of propagation of elastic waves in a fluid-saturated porous solid. I. Low-frequency range,” The Journal Of the Acoustical Society Of America, vol. 28, pp. 168–178, 1956. View at Publisher · View at Google Scholar · View at MathSciNet
  18. O. Doutres, N. Atalla, and K. Dong, “Effect of the microstructure closed pore content on the acoustic behavior of polyurethane foams,” Journal of Applied Physics, vol. 110, no. 6, Article ID 064901, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. C. Zhang, J. Li, Z. Hu, F. Zhu, and Y. Huang, “Correlation between the acoustic and porous cell morphology of polyurethane foam: effect of interconnected porosity,” Materials & Design, vol. 41, pp. 319–325, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. G. Caviglia and A. Morro, “Reflection and transmission in anisotropic dissipative multilayers,” European Journal of Mechanics A. Solids, vol. 21, no. 6, pp. 1055–1067, 2002. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  21. K.-I. Jung, S. W. Yoon, S.-J. Sung, and J.-K. Park, “Carbon black effect on the acoustic properties of nitrile butadiene rubber,” Journal of Applied Polymer Science, vol. 94, no. 2, pp. 678–683, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. K.-I. Jung, S. W. Yoon, K. Y. Cho, and J.-K. Park, “Acoustic properties of nitrile butadiene rubber for underwater applications,” Journal of Applied Polymer Science, vol. 85, no. 13, pp. 2764–2771, 2002. View at Publisher · View at Google Scholar · View at Scopus
  23. X. Yang, Y. Wang, and H. Yu, “Sound performance of multilayered composites,” Materials and Manufacturing Processes, vol. 22, no. 6, pp. 721–725, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. W.-H. Chen, F.-C. Lee, and D.-M. Chiang, “On the acoustic absorption of porous materials with different surface shapes and perforated plates,” Journal of Sound and Vibration, vol. 237, no. 2, pp. 337–355, 2000. View at Publisher · View at Google Scholar · View at Scopus
  25. G. P. Cheng, D. P. He, and G. J. Shu, “Underwater sound absorption property of porous aluminum,” Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 179, no. 2-3, pp. 191–194, 2001. View at Publisher · View at Google Scholar · View at Scopus
  26. E. Lind-Nordgren and P. Göransson, “Optimising open porous foam for acoustical and vibrational performance,” Journal of Sound and Vibration, vol. 329, no. 7, pp. 753–767, 2010. View at Publisher · View at Google Scholar · View at Scopus
  27. C. H. Sung, K. S. Lee, S. M. Oh, J. H. Kim, M. S. Kim, and H. M. Jeong, “Sound damping of a polyurethane foam nanocomposite,” Macromolecular Research, vol. 15, no. 5, pp. 443–448, 2007. View at Publisher · View at Google Scholar · View at Scopus
  28. H. Zhou, B. Li, and G. S. Huang, “Sound absorption characteristics of polymer microparticles,” Journal of Applied Polymer Science, vol. 101, no. 4, pp. 2675–2679, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. T. Yamashita, K. Suzuki, H. Adachi, S. Nishino, and Y. Tomota, “Effect of microscopic internal structure on sound absorption properties of polyurethane foam by X-ray computed tomography observations,” Materials Transactions, vol. 50, no. 2, pp. 373–380, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. H. Benkreira, A. Khan, and K. V. Horoshenkov, “Sustainable acoustic and thermal insulation materials from elastomeric waste residues,” Chemical Engineering Science, vol. 66, no. 18, pp. 4157–4171, 2011. View at Publisher · View at Google Scholar · View at Scopus
  31. ASTM International, “Standard test method for impedance and absorption of acoustical materials using a tube, two microphones and a digital frequency analysis system,” ASTM E–1050–98, ASTM International, West Conshohocken, Pa, USA, 2012. View at Google Scholar
  32. ISO, “Acoustics-determination of sound absorption coefficient and impedance in impedance tube: part 2. Transfer-function method,” ISO 10534-2, 2001. View at Google Scholar