Characteristics of Nanophase WC and WC-3 wt% (Ni, Co, and Fe) Alloys Using a Rapid Sintering Process for the Application of Friction Stir Processing Tools

<div>XRD patterns of raw powder (a), ball milled (b) and after sintering (c).</div>

Advances in Materials Science and Engineering

fig7

Figure 7

Figure 7: Characteristics of Nanophase WC and WC-3 wt% (Ni, Co, and Fe) Alloys Using a Rapid Sintering Process for the Application of Friction Stir Processing Tools 

Figure 7 | Characteristics of Nanophase WC and WC-3 wt% (Ni, Co, and Fe) Alloys Using a Rapid Sintering Process for the Application of Friction Stir Processing Tools 