Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015 (2015), Article ID 348691, 10 pages
http://dx.doi.org/10.1155/2015/348691
Research Article

Freeze-Thaw Performance and Moisture-Induced Damage Resistance of Base Course Stabilized with Slow Setting Bitumen Emulsion-Portland Cement Additives

1Sustainable Urban Transport Research Centre (SUTRA), Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia
2Department of Civil and Structural Engineering, Universiti Kebangsaan, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia

Received 16 August 2015; Accepted 9 November 2015

Academic Editor: Charles C. Sorrell

Copyright © 2015 Mojtaba Shojaei Baghini and Amiruddin Ismail. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Ghazavi and M. Roustaei, “Freeze-thaw performance of clayey soil reinforced with geotextile layer,” Cold Regions Science and Technology, vol. 89, pp. 22–29, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Altun, A. Sezer, and A. Erol, “The effects of additives and curing conditions on the mechanical behavior of a silty soil,” Cold Regions Science and Technology, vol. 56, no. 2-3, pp. 135–140, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Qi, W. Ma, and C. Song, “Influence of freeze–thaw on engineering properties of a silty soil,” Cold Regions Science and Technology, vol. 53, no. 3, pp. 397–404, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Qi, P. A. Vermeer, and G. Cheng, “A review of the influence of freeze-thaw cycles on soil geotechnical properties,” Permafrost and Periglacial Processes, vol. 17, no. 3, pp. 245–252, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. L. C. Wong and M. D. Haug, “Cyclical closed-system freeze-thaw permeability testing of soil liner and cover materials,” Canadian Geotechnical Journal, vol. 28, no. 6, pp. 784–793, 1991. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Gullu and K. Hazirbaba, “Unconfined compressive strength and post-freeze–thaw behavior of fine-grained soils treated with geofiber and synthetic fluid,” Cold Regions Science and Technology, vol. 62, no. 2-3, pp. 142–150, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Yıldız and A. S. Soğanc, “Effect of freezing and thawing on strength and permeability of lime-stabilized clays,” Scientia Iranica, vol. 19, no. 4, pp. 1013–1017, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. R. L. Parsons and J. P. Milburn, “Engineering behavior of stabilized soils,” Transportation Research Record, vol. 1837, no. 1, pp. 20–29, 2003. View at Google Scholar · View at Scopus
  9. M. S. Baghini, A. Ismail, and M. R. Bin Karim, “Evaluation of cement-treated mixtures with slow setting bitumen emulsion as base course material for road pavements,” Construction and Building Materials, vol. 94, pp. 323–336, 2015. View at Publisher · View at Google Scholar
  10. M. S. Baghini, A. Ismail, M. R. Karim, F. Shokri, and A. A. Firoozi, “Effect of styrene-butadiene copolymer latex on properties and durability of road base stabilized with Portland cement additive,” Construction and Building Materials, vol. 68, pp. 740–749, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. D. R. Salomon, Asphalt Emulsion Technology: Transportation Research Circular E-C102, Transportation Research Board, Characteristics of Bituminous Materials Committee, Washington, DC, USA, 2006.
  12. S. Brown and D. Needham, “A study of cement modified bitumen emulsion mixtures,” Association of Asphalt Paving Technologists, vol. 69, no. 1, pp. 92–121, 2000. View at Google Scholar
  13. F. Wang, Y. Liu, and S. Hu, “Effect of early cement hydration on the chemical stability of asphalt emulsion,” Construction and Building Materials, vol. 42, pp. 146–151, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. M. S. Baghini, A. B. Ismail, M. R. Karim, F. Shokri, and A. A. Firoozi, “Effects on engineering properties of cement-treated road base with slow setting bitumen emulsion,” International Journal of Pavement Engineering, vol. 16, pp. 1–14, 2015. View at Publisher · View at Google Scholar
  15. D. Lesueur and J. J. Potti, “Cold mix design: a rational approach based on the current understanding of the breaking of bituminous emulsions,” Road Materials and Pavement Design, vol. 5, supplement 1, pp. 65–87, 2004. View at Publisher · View at Google Scholar
  16. W. G. Wong, Y. Qun, and K. C. P. Wang, “Performances of asphalt-treated base and semi-rigid base,” HKIE Transactions, vol. 10, no. 3, pp. 54–58, 2003. View at Google Scholar
  17. ACI Committee, “State-of-the-art report on soil cement,” ACI Materials Journal, vol. 87, no. 4, pp. 395–417, 1997. View at Google Scholar
  18. R. Wang, P.-M. Wang, and X.-G. Li, “Physical and mechanical properties of styrene–butadiene rubber emulsion modified cement mortars,” Cement and Concrete Research, vol. 35, no. 5, pp. 900–906, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. J. A. Rossignolo and M. V. C. Agnesini, “Durability of polymer-modified lightweight aggregate concrete,” Cement and Concrete Composites, vol. 26, no. 4, pp. 375–380, 2004. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Ohama, “Polymer-based materials for repair and improved durability: Japanese experience,” Construction and Building Materials, vol. 10, no. 1, pp. 77–82, 1996. View at Publisher · View at Google Scholar · View at Scopus
  21. G. Barluenga and F. Hernández-Olivares, “SBR latex modified mortar rheology and mechanical behaviour,” Cement and Concrete Research, vol. 34, no. 3, pp. 527–535, 2004. View at Publisher · View at Google Scholar · View at Scopus
  22. H. I. Al-Abdul Wahhab, M. G. Baig, I. A. Mahmoud, and H. M. Kattan, “Study of road bases construction in Saudi Arabia using foam asphalt,” Construction and Building Materials, vol. 26, no. 1, pp. 113–121, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. A. Behiry, “Utilization of cement treated recycled concrete aggregates as base or subbase layer in Egypt,” Ain Shams Engineering Journal, vol. 4, no. 4, pp. 661–673, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Pasetto and N. Baldo, “Experimental evaluation of high performance base course and road base asphalt concrete with electric arc furnace steel slags,” Journal of Hazardous Materials, vol. 181, no. 1–3, pp. 938–948, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. J. L. Daniels, H. I. Inyang, and I. K. Iskandar, “Durability of Boston blue clay in waste containment applications,” Journal of Materials in Civil Engineering, vol. 15, no. 2, pp. 144–152, 2003. View at Publisher · View at Google Scholar · View at Scopus
  26. O. Pospíchal, B. Kucharczyková, P. Misák et al., “Freeze-thaw resistance of concrete with porous aggregate,” Procedia Engineering, vol. 2, no. 1, pp. 521–529, 2010. View at Google Scholar
  27. B. Kucharczyková, Z. Keršner, O. Pospíchal, P. Misák, P. Daněk, and P. Schmid, “The porous aggregate pre-soaking in relation to the freeze-thaw resistance of lightweight aggregate concrete,” Construction and Building Materials, vol. 30, pp. 761–766, 2012. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Bin-Shafique, K. Rahman, M. Yaykiran, and I. Azfar, “The long-term performance of two fly ash stabilized fine-grained soil subbases,” Resources, Conservation and Recycling, vol. 54, no. 10, pp. 666–672, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. J. Liu, T. Wang, and Y. Tian, “Experimental study of the dynamic properties of cement- and lime-modified clay soils subjected to freeze-thaw cycles,” Cold Regions Science and Technology, vol. 61, no. 1, pp. 29–33, 2010. View at Publisher · View at Google Scholar · View at Scopus
  30. B. D. Alkire and J. Jashimuddin, “Changes in strength of silt due to freeze-thaw,” Journal of Technical Topics in Civil Engineering, vol. 110, no. 1, pp. 48–53, 1984. View at Google Scholar · View at Scopus
  31. E. Simonsen and U. Isacsson, “Soil behavior during freezing and thawing using variable and constant confining pressure triaxial tests,” Canadian Geotechnical Journal, vol. 38, no. 4, pp. 863–875, 2001. View at Publisher · View at Google Scholar · View at Scopus
  32. K. Hazirbaba and H. Gullu, “California bearing ratio improvement and freeze-thaw performance of fine-grained soils treated with geofiber and synthetic fluid,” Cold Regions Science and Technology, vol. 63, no. 1-2, pp. 50–60, 2010. View at Publisher · View at Google Scholar · View at Scopus