Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 397273, 17 pages
http://dx.doi.org/10.1155/2015/397273
Research Article

Seismic Response and Evaluation of SDOF Self-Centering Friction Damping Braces Subjected to Several Earthquake Ground Motions

1Department of Civil and Environmental Engineering, Incheon National University, 12-1 Songdo-dong, Yeonsu-gu, Incheon 406-840, Republic of Korea
2Incheon Disaster Prevention Research Center, Incheon National University, 12-1 Songdo-dong, Yeonsu-gu, Incheon 406-840, Republic of Korea
3POSCO Product Application Center, 180-1 Songdo-dong, Yeonsu-gu, Incheon 406-840, Republic of Korea

Received 19 June 2015; Revised 21 August 2015; Accepted 24 August 2015

Academic Editor: Stefano Sorace

Copyright © 2015 Jong Wan Hu and Myung-Hyun Noh. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Uriz, F. C. Filippou, and S. A. Mahin, “Model for cyclic inelastic buckling of steel braces,” Journal of Structural Engineering, vol. 134, no. 4, pp. 619–628, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. J. W. Hu and R. T. Leon, “Analyses and evaluations for composite-moment frames with SMA PR-CFT connections,” Nonlinear Dynamics, vol. 65, no. 4, pp. 433–455, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. J. W. Hu, E. Choi, and R. T. Leon, “Design, analysis and application of innovative composite PR connections between steel beams and CFT columns,” Smart Materials and Structures, vol. 20, no. 2, Article ID 025019, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. J. W. Hu, D. K. Kim, and E. Choi, “Numerical investigation on the cyclic behavior of smart recentering clip-angle connections with superelastic shape memory alloy fasteners,” Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, vol. 227, no. 6, pp. 1315–1327, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. P. Uriz, Towards earthquake resistant design of concentrically braced steel buildings [Ph.D. thesis], University of California, Berkeley, Berkeley, Calif, USA, 2005.
  6. R. Sabelli, “Research on improving the design and analysis of earthquake-resistant steel-braced frames,” The 2000 NEHRP Professional Fellowship Report, EERI, Oakland, Calif, USA, 2001. View at Google Scholar
  7. R. Sabelli, S. Mahin, and C. Chang, “Seismic demands on steel braced frame buildings with buckling-restrained braces,” Engineering Structures, vol. 25, no. 5, pp. 655–666, 2003. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Sabelli, “Recommended provisions for buckling-restrained braced frames,” AISC Engineering Journal, vol. 41, no. 4, pp. 155–175, 2004. View at Google Scholar
  9. T. T. Soong and G. F. Dargush, Passive Energy Dissipation Systems in Structural Engineering, John Wiley & Sons, New York, NY, USA, 1997.
  10. C. Christopoulos and A. Filiatrault, Principles of Passive Supplemental Damping and Seismic Isolation, IUSS Press, Pavia, Italy, 2006.
  11. R.-H. Zhang, T. T. Soong, and P. Mahmoodi, “Seismic response of steel frame structures with added viscoelastic dampers,” Earthquake Engineering & Structural Dynamics, vol. 18, no. 3, pp. 389–396, 1989. View at Publisher · View at Google Scholar · View at Scopus
  12. N. Makris, G. F. Dargush, and M. C. Constantinou, “Dynamic analysis of viscoelastic fluid dampers,” Journal of Engineering Mechanics, vol. 121, no. 10, pp. 1114–1121, 1995. View at Publisher · View at Google Scholar · View at Scopus
  13. G. Pekcan, J. B. Mander, and S. S. Chen, “The seismic response of a 1: 3 scale model R.C. Structure with elastomeric spring dampers,” Earthquake Spectra, vol. 11, no. 2, pp. 249–267, 1995. View at Publisher · View at Google Scholar
  14. S. Sorace and G. Terenzi, “Non-linear dynamic modelling and design procedure of FV spring-dampers for base isolation,” Engineering Structures, vol. 23, no. 12, pp. 1556–1567, 2001. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Sorace and G. Terenzi, “Seismic protection of frame structures by fluid viscous damped braces,” Journal of Structural Engineering, vol. 134, no. 1, pp. 45–55, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. A. S. Whittaker, V. V. Bertero, C. L. Thompson, and L. J. Alonso, “Seismic testing of steel plate energy dissipation devices,” Earthquake Spectra, vol. 7, no. 4, pp. 563–604, 1991. View at Google Scholar
  17. K.-C. Tsai, H.-W. Chen, C.-P. Hong, and Y.-F. Su, “Design of steel triangular plate energy absorbers for seismic-resistant construction,” Earthquake Spectra, vol. 9, no. 3, pp. 505–528, 1993. View at Publisher · View at Google Scholar · View at Scopus
  18. C. E. Grigorian, T. S. Yang, and E. P. Popov, “Slotted bolted connection energy dissipators,” Earthquake Spectra, vol. 9, no. 3, pp. 491–504, 1993. View at Publisher · View at Google Scholar
  19. I. H. Mualla and B. Belev, “Performance of steel frames with a new friction damper device under earthquake excitation,” Engineering Structures, vol. 24, no. 3, pp. 365–371, 2002. View at Publisher · View at Google Scholar · View at Scopus
  20. J. W. Hu, R. T. Leon, and T. Park, “Mechanical models for the analysis of bolted T-stub connections under cyclic loads,” Journal of Constructional Steel Research, vol. 78, pp. 45–57, 2012. View at Publisher · View at Google Scholar · View at Scopus
  21. J. W. Hu, R. T. Leon, and T. H. Park, “Mechanical modeling of bolted T-stub connections under cyclic loads part I: stiffness modeling,” Journal of Constructional Steel Research, vol. 67, no. 11, pp. 1710–1718, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. J.-W. Hu, Y.-S. Kang, D.-H. Choi, and T. Park, “Seismic design, performance, and behavior of composite-moment frames with steel beam-to-concrete filled tube column connections,” International Journal of Steel Structures, vol. 10, no. 2, pp. 177–191, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. J. W. Hu, “Seismic analysis and evaluation of several recentering braced frame structures,” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 228, no. 5, pp. 781–798, 2014. View at Publisher · View at Google Scholar · View at Scopus
  24. I. D. Aiken and J. Kelly, “Earthquake simulator testing and analytical studies of two energy-absorbing systems for multistory structures,” Tech. Rep. UCB/EERC-90/03, University of California, Berkeley, Calif, USA, 1990. View at Google Scholar
  25. D. K. Nims, P. J. Richter, and R. E. Bachman, “The use of the energy dissipating restraint for seismic hazard mitigation,” Earthquake Spectra, vol. 9, no. 3, pp. 467–489, 1993. View at Publisher · View at Google Scholar · View at Scopus
  26. E. J. Graesser and F. A. Cozzarelli, “Multidimensional models of histeretic material behaviour for vibration analysis of shape memory energy absorbing devices,” Tech. Rep. NCEER-89-0018, National Center for Earthquake Engineering, Buffalo, NY, USA, 1989. View at Google Scholar
  27. G. Song, N. Ma, and H.-N. Li, “Applications of shape memory alloys in civil structures,” Engineering Structures, vol. 28, no. 9, pp. 1266–1274, 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. P. Clark, I. Aiken, J. Kelly, M. Higashino, and R. Krumme, “Experimental and analytical studies of shape-memory alloy dampers for structural control,” in Smart Structures and Materials 1995: Passive Damping, vol. 2445 of Proceedings of SPIE, p. 241, San Diego, Calif, USA, February 1995. View at Publisher · View at Google Scholar
  29. S. Zhu and Y. Zhang, “Seismic analysis of concentrically braced frame systems with self-centering friction damping braces,” Journal of Structural Engineering, vol. 134, no. 1, pp. 121–131, 2008. View at Publisher · View at Google Scholar · View at Scopus
  30. R. Desroches, J. McCormick, and M. Delemont, “Cyclic properties of superelastic shape memory alloy wires and bars,” Journal of Structural Engineering, vol. 130, no. 1, pp. 38–46, 2004. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Dolce and D. Cardone, “Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension,” International Journal of Mechanical Sciences, vol. 43, no. 11, pp. 2657–2677, 2001. View at Publisher · View at Google Scholar · View at Scopus
  32. J. W. Hu, “Numerical simulation for the behavior of superelastic shape memory alloys,” Journal of Mechanical Science and Technology, vol. 27, no. 2, pp. 381–386, 2013. View at Publisher · View at Google Scholar · View at Scopus
  33. V. A. Chernenko, V. A. L'vov, E. Cesari, A. Kosogor, and J. M. Barandiaran, “Transformation volume effects on shape memory alloys,” Metals, vol. 3, no. 3, pp. 237–282, 2013. View at Publisher · View at Google Scholar
  34. S. Mazzoni, F. Mckenna, and G. L. Fenves, OpenSEES Command Language Manual v. 1.7.3, Department of Civil Environmental Engineering, University of California, Berkeley, Calif, USA, 2006.
  35. F. Auricchio and E. Sacco, “A one-dimensional model for superelastic shape-memory alloys with different elastic properties between austenite and martensite,” International Journal of Non-Linear Mechanics, vol. 32, no. 6, pp. 1101–1114, 1997. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  36. P. G. Somerville, N. Smith, S. Punyamurthula, and J. Sun, “Development of ground motion time histories for phase 2 of the FEMA/SAC steel project,” SAC Background Document SAC/BD97/04, 1997. View at Google Scholar