Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 410830, 6 pages
http://dx.doi.org/10.1155/2015/410830
Research Article

Magnetic Properties and Core Loss Behavior of Fe-6.5wt.%Si Ribbons Prepared by Melt Spinning

State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083, China

Received 13 November 2014; Revised 31 December 2014; Accepted 2 January 2015

Academic Editor: Pavel Lejcek

Copyright © 2015 S. Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Fe-6.5wt.%Si alloy is prepared in the form of continuous ribbons with 25 mm in width and 0.03 mm in thickness by using melt spinning technique. The ribbons are flexible and could be wounded into tapes. DC magnetic properties and core loss behaviors of the ribbons after heat treatment are investigated in this paper. The magnetic properties are compared with ribbons by cold rolling and CVD methods. The melt spinning ribbons exhibit much less core loss in the frequencies more than 10 kHz. The melt spinning ribbons are promising to be used for electric devices used in medium or higher frequencies.