Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015 (2015), Article ID 434923, 7 pages
http://dx.doi.org/10.1155/2015/434923
Research Article

Improvement in the Mechanical Properties of High Temperature Shape Memory Alloy (Ti50Ni25Pd25) by Copper Addition

1School of Mechanical and Manufacturing Engineering (SMME), National University of Science and Technology (NUST), Islamabad 44000, Pakistan
2Institute of Industrial Control System, Rawalpindi 46000, Pakistan

Received 28 November 2014; Accepted 20 February 2015

Academic Editor: Rui Vilar

Copyright © 2015 Saif ur Rehman et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Miyazaki, K. N. Melton, D. Stockel, and C. M. Waymann, Butterworth-Heinemann, London, UK, 1990.
  2. J. Ma, I. Karaman, and R. D. Noebe, “High temperature shape memory alloys,” International Materials Reviews, vol. 55, no. 5, pp. 257–315, 2010. View at Google Scholar
  3. T. S. Quackenbush and R. McKillip Jr., “Selected applications of aeropropulsion actuation and shape control devices using HTSMAs,” Metallurgical and Materials Transactions A, vol. 43, no. 8, pp. 2870–2881, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. L. Kovarik, F. Yang, A. Garg et al., “Structural analysis of a new precipitate phase in high-temperature TiNiPt shape memory alloys,” Acta Materialia, vol. 58, no. 14, pp. 4660–4673, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. D. Golberg, Y. Xu, Y. Murakami, K. Otsuka, T. Ueki, and H. Horikawa, “High-temperature shape memory effect in Ti50Pd50-xNix (x = 10, 15, 20) alloys,” Materials Letters, vol. 22, no. 5-6, pp. 241–248, 1995. View at Publisher · View at Google Scholar · View at Scopus
  6. Y. Xu, S. Shimizu, Y. Suzuki, K. Otsuka, T. Ueki, and K. Mitose, “Recovery and recrystallization processes in Ti-Pd-Ni high-temperature shape memory alloys,” Acta Materialia, vol. 45, no. 4, pp. 1503–1511, 1997. View at Publisher · View at Google Scholar · View at Scopus
  7. J. A. DeCastro, K. J. Melcher, R. D. Noebe, and D. J. Gaydosh, “Development of a numerical model for high-temperature shape memory alloys,” Smart Materials and Structures, vol. 16, no. 6, pp. 2080–2090, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Stebner, S. Padula II, R. Noebe, B. Lerch, and D. Quinn, “Development, characterization, and design considerations of Ni19.5 Ti50.5 Pd25 Pt5 high-temperature shape memory alloy helical actuators,” Journal of Intelligent Material Systems and Structures, vol. 20, no. 17, pp. 2107–2126, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. K. C. Atli, I. Karaman, R. D. Noebe, A. Garg, Y. I. Chumlyakov, and I. V. Kireeva, “Shape memory characteristics of Ti49.5Ni25Pd25Sc0.5 high-temperature shape memory alloy after severe plastic deformation,” Acta Materialia, vol. 59, no. 12, pp. 4747–4760, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. B. Kockar, K. C. Atli, J. Ma et al., “Role of severe plastic deformation on the cyclic reversibility of a Ti 50.3Ni33.7Pd16 high temperature shape memory alloy,” Acta Materialia, vol. 58, no. 19, pp. 6411–6420, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. K. C. Atli, I. Karaman, R. D. Noebe, A. Garg, Y. I. Chumlyakov, and I. V. Kireeva, “Improvement in the shape memory response of Ti50.5Ni24.5Pd25 high-temperature shape memory alloy with scandium microalloying,” Metallurgical and Materials Transactions A, vol. 41, no. 10, pp. 2485–2497, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. G. S. Bigelow, S. A. Padula II, A. Garg, D. Gaydosh, and R. D. Noebe, “Characterization of ternary NiTiPd high-temperature shape-memory alloys under load-biased thermal cycling,” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 41, no. 12, pp. 3065–3079, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. K. C. Atli, B. E. Franco, I. Karaman, D. Gaydosh, and R. D. Noebe, “Influence of crystallographic compatibility on residual strain of TiNi based shape memory alloys during thermo-mechanical cycling,” Materials Science and Engineering A, vol. 574, pp. 9–16, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. K. C. Atli, I. Karaman, and R. D. Noebe, “Work output of the two-way shape memory effect in Ti50.5Ni24.5Pd25 high-temperature shape memory alloy,” Scripta Materialia, vol. 65, no. 10, pp. 903–906, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. K. Otsuka, K. Oda, Y. Ueno, M. Piao, T. Ueki, and H. Horikawa, “The shape memory effect in a Ti50Pd50 alloy,” Scripta Metallurgica et Materiala, vol. 29, no. 10, pp. 1355–1358, 1993. View at Publisher · View at Google Scholar · View at Scopus
  16. W. S. Yang and D. E. Mikkola, “Ductilization of Ti-Ni-Pd shape memory alloys with boron additions,” Scripta Metallurgica et Materialia, vol. 28, no. 2, pp. 161–165, 1993. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. Suzuki, Y. Xu, S. Morito, K. Otsuka, and K. Mitose, “Effects of boron addition on microstructure and mechanical properties of Ti-Td-Ni high-temperature shape memory alloys,” Materials Letters, vol. 36, no. 1-4, pp. 85–94, 1998. View at Publisher · View at Google Scholar · View at Scopus
  18. I. M. Khan, H. Y. Kim, T.-H. Nam, and S. Miyazaki, “Effect of Cu addition on the high temperature shape memory properties of Ti50Ni25Pd25 alloy,” Journal of Alloys and Compounds, vol. 577, supplement 1, pp. S383–S387, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. K. V. Ramaiah, C. N. Saikrishna, and S. K. Bhaumik, “Microstructure and transformation behaviour of Ni75-XTiXPd25 high temperature shape memory alloys,” Journal of Alloys and Compounds, vol. 554, pp. 319–326, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Shimizu, Y. Xu, E. Okunishi, S. Tanaka, K. Otsuka, and K. Mitose, “Improvement of shape memory characteristics by precipitation-hardening of Ti-Pd-Ni alloys,” Materials Letters, vol. 34, no. 1-2, pp. 23–29, 1998. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Imran Khan, H. Y. Kim, T. H. Nam, and S. Miyazaki, “Formation of nanoscaled precipitates and their effects on the high-temperature shape-memory characteristics of a Ti50Ni15Pd25Cu10 alloy,” Acta Materialia, vol. 60, no. 16, pp. 5900–5913, 2012. View at Publisher · View at Google Scholar · View at Scopus
  22. M. I. Khan, H. Y. Kim, Y. Namigata, T.-H. Nam, and S. Miyazaki, “Combined effects of work hardening and precipitation strengthening on the cyclic stability of Ti Ni Pd Cu-based high-temperature shape memory alloys,” Acta Materialia, vol. 61, no. 13, pp. 4797–4810, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. K. V. Ramaiah, C. N. Saikrishna, J. Bhagyaraj, and S. K. Bhaumik, “Influence of Sc addition on microstructure and transformation behaviour of Ni24.7Ti50.3Pd25.0 high temperature shape memory alloy,” Intermetallics, vol. 40, pp. 10–18, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. S. U. Rehman, M. Khan, A. N. Khan et al., “Transformation behavior and shape memory properties of Ti50Ni15Pd25Cu10 high temperature shape memory alloy at various aging temperatures,” Materials Science and Engineering A, vol. 619, pp. 171–179, 2014. View at Google Scholar
  25. O. Mercier and K. N. Melton, “The substitution of Cu for Ni in NiTi shape memory alloys,” Metallurgical Transactions A, vol. 10, no. 3, pp. 387–389, 1979. View at Publisher · View at Google Scholar · View at Scopus
  26. K. Otsuka and C. M. Wayman, Shape Memory Materials, Cambridge University Press, Cambridge, Mass, USA, 1998.