Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 465358, 7 pages
http://dx.doi.org/10.1155/2015/465358
Research Article

Preparation and Mechanical Properties of Continuous Carbon Nanotube Networks Modified Cf/SiC Composite

Key Laboratory of Advanced Ceramics and Machining Technology of Ministry of Education, Tianjin University, Tianjin 300072, China

Received 30 March 2015; Revised 17 May 2015; Accepted 18 May 2015

Academic Editor: Antônio G. B. de Lima

Copyright © 2015 Lei Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Llorca and R. N. Singh, “Influence of fiber and interfacial properties on fracture behavior of fiber-reinforced ceramic composites,” Journal of the American Ceramic Society, vol. 74, no. 11, pp. 2882–2890, 1991. View at Publisher · View at Google Scholar
  2. L. Filipuzzi, G. Camus, R. Naslain, and J. Thebault, “Oxidation mechanisms and kinetics of 1D-SiC/C/SiC composite materials: I, An experimental approach,” Journal of the American Ceramic Society, vol. 77, no. 2, pp. 459–466, 1994. View at Publisher · View at Google Scholar · View at Scopus
  3. R. L. Dong, Y. Hirata, H. Sueyoshi, M. Higo, and Y. Uemura, “Polymer impregnation and pyrolysis (PIP) method for the preparation of laminated woven fabric/mullite matrix composites with pseudoductility,” Journal of the European Ceramic Society, vol. 24, no. 1, pp. 53–64, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Magnant, R. Pailler, Y. Le Petitcorps et al., “Fiber-reinforced ceramic matrix composites processed by a hybrid technique based on chemical vapor infiltration, slurry impregnation and spark plasma sintering,” Journal of the European Ceramic Society, vol. 33, no. 1, pp. 181–190, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. H. Mei, H. Q. Li, Q. L. Bai, Q. Zhang, and L. F. Cheng, “Increasing the strength and toughness of a carbon fiber/silicon carbide composite by heat treatment,” Carbon, vol. 54, pp. 42–47, 2013. View at Publisher · View at Google Scholar · View at Scopus
  6. R. Naslain, A. Guette, F. Rebillat, R. Pailler, F. Langlais, and X. Bourrat, “Boron-bearing species in ceramic matrix composites for long-term aerospace applications,” Journal of Solid State Chemistry, vol. 177, no. 2, pp. 449–456, 2004. View at Publisher · View at Google Scholar · View at Scopus
  7. S. Schmidt, S. Beyer, H. Knabe, H. Immich, R. Meistring, and A. Gessler, “Advanced ceramic matrix composite materials for current and future propulsion technology applications,” Acta Astronautica, vol. 55, pp. 409–420, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. W. Yang, H. Araki, A. Kohyama, S. Thaveethavorn, H. Suzuki, and T. Noda, “Process and mechanical properties of in situ silicon carbide-nanowire-reinforced chemical vapor infiltrated silicon carbide/silicon carbide composite,” Journal of the American Ceramic Society, vol. 87, no. 9, pp. 1720–1725, 2004. View at Publisher · View at Google Scholar · View at Scopus
  9. J.-C. Charlier, T. W. Ebbesen, and P. Lambin, “Structural and electronic properties of pentagon-heptagon pair defects in carbon nanotubes,” Physical Review B, vol. 53, no. 16, pp. 11108–11113, 1996. View at Publisher · View at Google Scholar · View at Scopus
  10. M. M. J. Treacy, T. W. Ebbesen, and J. M. Gibson, “Exceptionally high Young's modulus observed for individual carbon nanotubes,” Nature, vol. 381, no. 6584, pp. 678–680, 1996. View at Publisher · View at Google Scholar · View at Scopus
  11. M. A. Osman and D. Srivastava, “Temperature dependence of the thermal conductivity of single-wall carbon nanotubes,” Nanotechnology, vol. 12, no. 1, pp. 21–24, 2001. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Z. Wang, X. D. Li, J. Ma, G. Y. Li, and T. J. Hu, “Fabrication of multi-walled carbon nanotube-reinforced carbon fiber/silicon carbide composites by polymer infiltration and pyrolysis process,” Composites Science and Technology, vol. 72, no. 3, pp. 461–466, 2012. View at Publisher · View at Google Scholar
  13. H. Yu, X. Zhou, W. Zhang, H. Peng, C. Zhang, and K. Sun, “Properties of carbon nano-tubes-Cf/SiC composite by precursor infiltration and pyrolysis process,” Materials & Design, vol. 32, no. 6, pp. 3516–3520, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Hu, S. Dong, X. Zhang et al., “Process and mechanical properties of carbon/carbon-silicon carbide composite reinforced with carbon nanotubes grown in situ,” Composites Part A: Applied Science and Manufacturing, vol. 48, no. 1, pp. 73–81, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. J. B. Hu, S. M. Dong, Q. Feng, M. Y. Zhou, X. J. Wang, and Y. B. Cheng, “Tailoring carbon nanotube/matrix interface to optimize mechanical properties of multiscale composites,” Carbon, vol. 69, pp. 621–625, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. Z. Hu, S. Dong, J. Hu, and B. Lu, “Fabrication and properties analysis of Cf-CNT/SiC composite,” Ceramics International, vol. 39, no. 2, pp. 2147–2152, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. K. Sun, J. S. Yu, C. R. Zhang, and X. G. Zhou, “In situ growth carbon nanotube reinforced SiCf/SiC composite,” Materials Letters, vol. 66, no. 1, pp. 92–95, 2012. View at Publisher · View at Google Scholar
  18. S. P. Sharma and S. C. Lakkad, “Effect of CNTs growth on carbon fibers on the tensile strength of CNTs grown carbon fiber-reinforced polymer matrix composites,” Composites Part A: Applied Science and Manufacturing, vol. 42, no. 1, pp. 8–15, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. L. Dong, Y. Li, L. Wang, F. Hou, and J. Liu, “Spatial dispersion state of carbon nanotubes in freeze-drying method prepared carbon fiber based preform and its effect on electrical conductivity of carbon fiber/epoxy composite,” Materials Letters, vol. 130, pp. 292–295, 2014. View at Google Scholar
  20. L. Dong, Y. Li, L. Wang, Z. Wan, F. Hou, and J. Liu, “Combination effect of physical drying with chemical characteristic of carbon nanotubes on through-thickness properties of carbon fiber/epoxy composites,” Journal of Materials Science, vol. 49, no. 14, pp. 4979–4988, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. L. Dong, F. Hou, Y. Li, L. Wang, H. Gao, and Y. Tang, “Preparation of continuous carbon nanotube networks in carbon fiber/epoxy composite,” Composites Part A: Applied Science and Manufacturing, vol. 56, pp. 248–255, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. W. L. Li, K. Lu, and J. Y. Walz, “Freeze casting of porous materials: review of critical factors in microstructure evolution,” International Materials Reviews, vol. 57, no. 1, pp. 37–60, 2012. View at Publisher · View at Google Scholar
  23. M. C. Gutierrez, M. J. Hortiguela, J. M. Amarilla, R. Jimenez, M. L. Ferrer, and F. del Monte, “Macroporous 3D architectures of self-assembled MWCNT surface decorated with Pt nanoparticles as anodes for a direct methanol fuel cell,” Journal of Physical Chemistry C, vol. 111, no. 15, pp. 5557–5560, 2007. View at Publisher · View at Google Scholar
  24. S.-H. Park, K.-H. Kim, K. C. Roh, and K.-B. Kim, “Morphology control of three-dimensional carbon nanotube macrostructures fabricated using ice-templating method,” Journal of Porous Materials, vol. 20, no. 5, pp. 1289–1297, 2013. View at Publisher · View at Google Scholar · View at Scopus
  25. W. Li, D. Long, J. Miyawaki et al., “Structural features of polyacrylonitrile-based carbon fibers,” Journal of Materials Science, vol. 47, no. 2, pp. 919–928, 2012. View at Publisher · View at Google Scholar · View at Scopus
  26. M. C. Gutiérrez, M. L. Ferrer, and F. del Monte, “Ice-templated materials: sophisticated structures exhibiting enhanced functionalities obtained after unidirectional freezing and ice-segregation-induced self-assembly,” Chemistry of Materials, vol. 20, no. 3, pp. 634–648, 2008. View at Publisher · View at Google Scholar · View at Scopus
  27. Z. C. Li, X. G. Yin, T. Ma, W. Miao, and Z. J. Zhang, “Bending and thermal expansion properties of 2.5D C/SiC composites,” Materials Transactions, vol. 52, no. 12, pp. 2165–2167, 2011. View at Google Scholar
  28. M.-F. Yu, O. Lourie, M. J. Dyer, K. Moloni, T. F. Kelly, and R. S. Ruoff, “Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load,” Science, vol. 287, no. 5453, pp. 637–640, 2000. View at Publisher · View at Google Scholar · View at Scopus
  29. S. H. Kim, G. W. Mulholland, and M. R. Zachariah, “Density measurement of size selected multiwalled carbon nanotubes by mobility-mass characterization,” Carbon, vol. 47, no. 5, pp. 1297–1302, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. B. Li, C. R. Zhang, F. Cao, S. Q. Wang, B. Chen, and J. S. Li, “Effects of fiber surface treatments on mechanical properties of T700 carbon fiber reinforced BN-Si3N4 composites,” Materials Science and Engineering A, vol. 471, no. 1-2, pp. 169–173, 2007. View at Publisher · View at Google Scholar
  31. D. C. Davis, J. W. Wilkerson, J. Zhu, and D. O. O. Ayewah, “Improvements in mechanical properties of a carbon fiber epoxy composite using nanotube science and technology,” Composite Structures, vol. 92, no. 11, pp. 2653–2662, 2010. View at Publisher · View at Google Scholar · View at Scopus
  32. C. Ren, Q. Gong, L. Guo, X. Zhao, and J. Liang, “Analyses of reinforcing effects of in situ grown CNTs on carbon fibre fabric/epoxy composites at micro- and macroscale,” Micro & Nano Letters, vol. 7, no. 3, pp. 240–243, 2012. View at Publisher · View at Google Scholar · View at Scopus