Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015 (2015), Article ID 485626, 7 pages
http://dx.doi.org/10.1155/2015/485626
Research Article

Ostwald Ripening Process of Coherent β′ Precipitates during Aging in Fe0.75Ni0.10Al0.15 and Fe0.74Ni0.10Al0.15Cr0.01 Alloys

Instituto Politécnico Nacional (ESIQIE-CNMN), Apartado Postal 118-556, 07051 Mexico, DF, Mexico

Received 26 September 2014; Revised 16 December 2014; Accepted 6 January 2015

Academic Editor: Jörg M. K. Wiezorek

Copyright © 2015 N. Cayetano-Castro et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Baldan, “Progress in Ostwald ripening theories and their applications to nickel-base superalloys,” Journal of Materials Science, vol. 37, no. 11, pp. 2171–2202, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. G. Kostorz, Phase Transformations in Materials, Wiley-VCH, Weinheim, Germany, 2nd edition, 2001.
  3. C. J. Kuehmann and P. W. Voorhees, “Ostwald ripening in ternary alloys,” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 27, no. 4, pp. 937–942, 1996. View at Publisher · View at Google Scholar · View at Scopus
  4. N. Cayetano-Castro, H. J. Dorantes-Rosales, V. M. López-Hirata, J. J. Cruz-Rivera, J. Moreno-Palmerin, and J. L. González-Velázquez, “Coarsening kinetics of coherent precipitates in Fe-10% Ni-15% Al alloy,” Revista de Metalurgia de Madrid, vol. 44, no. 2, pp. 162–169, 2008. View at Google Scholar · View at Scopus
  5. K. Thornton, N. Akaiwa, and P. W. Voorhees, “Large-scale simulations of Ostwald ripening in elastically stressed solids. I. Development of microstructure,” Acta Materialia, vol. 52, no. 5, pp. 1365–1378, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. A. J. Ardell, “The effect of volume fraction on particle coarsening: theoretical considerations,” Acta Metallurgica, vol. 20, no. 1, pp. 61–71, 1972. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Schober, C. Lerchbacher, E. Eidenberger, P. Staron, H. Clemens, and H. Leitner, “Precipitation behavior of intermetallic NiAl particles in Fe-6 at.%Al-4 at.%Ni analyzed by SANS and 3DAP,” Intermetallics, vol. 18, no. 8, pp. 1553–1559, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Sauthoff, Intermetallics, Wiley-VCH, New York, NY, USA, 1st edition, 1995.
  9. H. J. Rosales-Dorantes, N. Cayetano-Castro, V. M. Lopez-Hirata, M. L. Saucedo-Muñoz, D. Villegas-Cardenas, and F. Hernández-Santiago, “Coarsening process of coherent β′ precipitates in Fe-10wt.%Ni-15wt.%Al and Fe-10wt.%Ni-15wt.%Al-1wt.%Cu alloys,” Materials Science and Technology, vol. 29, pp. 1492–1498, 2013. View at Google Scholar
  10. M. A. Muñoz-Morris and D. G. Morris, “Microstructure and mechanical behaviour of a Fe-Ni-Al alloy,” Materials Science and Engineering: A, vol. 444, no. 1-2, pp. 236–241, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. ASTM International, “Standard test methods for chemical analysis of stainless, heat-resisting, maraging, and other similar chromium-nickel-iron alloys,” Tech. Rep. ASTM E-353, 2006. View at Google Scholar
  12. O. Soriano-Vargas, M. L. Saucedo-Muñoz, V. M. Lopez-Hirata, and A. M. Paniagua-Mercado, “Coarsening of β′ precipitates in an isothermally-aged Fe75-Ni10-Al15 alloy,” Materials Transactions, vol. 51, no. 3, pp. 442–446, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Baldan, “Progress in Ostwald ripening theories and their applications to the γ′-precipitates in nickel-base superalloys Part II: Nickel-base superalloys,” Journal of Materials Science, vol. 37, no. 12, pp. 2379–2405, 2002. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Mehrer, Diffusion in Solid Metals and Alloys, Springer, Berling, UK, 1st edition, 1990.
  15. Thermo-Cal software v. 3.1/Niv5.TDB, 2008.
  16. C. Stallybrass and G. Sauthoff, “Ferritic Fe-Al-Ni-Cr alloys with coherent precipitates for high-temperature applications,” Materials Science and Engineering A, vol. 387–389, no. 1-2, pp. 985–990, 2004. View at Publisher · View at Google Scholar · View at Scopus
  17. C. Stallybrass, A. Schneider, and G. Sauthoff, “The strengthening effect of (Ni,Fe)Al precipitates on the mechanical properties at high temperatures of ferritic Fe-Al-Ni-Cr alloys,” Intermetallics, vol. 13, no. 12, pp. 1263–1268, 2005. View at Publisher · View at Google Scholar · View at Scopus
  18. I. M. Anderson, A. J. Duncan, and J. Bentley, “Site-distributions of Fe alloying additions to B2-ordered NiAl,” Intermetallics, vol. 7, no. 9, pp. 1017–1024, 1999. View at Publisher · View at Google Scholar · View at Scopus