Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015 (2015), Article ID 510356, 8 pages
http://dx.doi.org/10.1155/2015/510356
Research Article

Dynamic Fracture Toughness of TaC/CNTs/SiC CMCs Prepared by Spark Plasma Sintering

Department of Mechanical Engineering, University of Pittsburgh, Pittsburgh, PA 15261, USA

Received 11 September 2015; Revised 14 November 2015; Accepted 19 November 2015

Academic Editor: Fernando Lusquiños

Copyright © 2015 Qiaoyun Xie and Sylvanus N. Wosu. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Qiaoyun Xie and Sylvanus N. Wosu, “Dynamic Fracture Toughness of TaC/CNTs/SiC CMCs Prepared by Spark Plasma Sintering,” Advances in Materials Science and Engineering, vol. 2015, Article ID 510356, 8 pages, 2015. doi:10.1155/2015/510356