Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 580638, 12 pages
http://dx.doi.org/10.1155/2015/580638
Research Article

Effect of Cylinder Size on the Modulus of Elasticity and Compressive Strength of Concrete from Static and Dynamic Tests

1R&D Center, JNTINC Co. Ltd., 9 Hyundaikia-ro 830 beon-Gil, Bibong-Myeon, Hwaseong, Gyeonggi-do 18284, Republic of Korea
2Department of Architectural Engineering, Dong-A University, 37 Nakdong-Daero 550 beon-Gil, Saha-gu, Busan 49315, Republic of Korea
3Department of Safety Engineering, Incheon National University, 119 Academy-ro, Yeonsu-gu, Incheon 22012, Republic of Korea
4Department of Civil Engineering, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Republic of Korea

Received 1 June 2015; Revised 23 August 2015; Accepted 2 September 2015

Academic Editor: Santiago Garcia-Granda

Copyright © 2015 Byung Jae Lee et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary, American Concrete Institute, Farmington Hills, Mich, USA, 2014.
  2. IBC Council, International Building Code (IBC 2012), 2014.
  3. N. Gucunski, A. Imani, F. Romero et al., “Nondestructive testig to identify concrete bridge deck deterioration,” SHRP 2 Report S2-R06A-RR-1, 2013. View at Google Scholar
  4. ACI Committee 469, Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, American Concrete Institute, Farmington Hills, Mich, USA, 2014.
  5. A. Pauw, “Static modulus of elasticity of concrete as affected by density,” ACI Journal Proceedings, vol. 57, no. 12, pp. 679–687, 1960. View at Publisher · View at Google Scholar
  6. ACI Committee 363, “State-of-the-art report on high-strength concrete,” ACI Journal, Proceedings, vol. 81, no. 4, pp. 364–411, 1984. View at Google Scholar
  7. J. S. Popovics, “A study of static and dynamic modulus of elasticity of concrete,” ACI-CRC Final Report, 2008. View at Google Scholar
  8. T. Noguchi, F. Tomosawa, K. M. Nemati, B. M. Chiaia, and A. R. Fantilli, “A practical equation for elastic modulus of concrete,” ACI Structural Journal, vol. 106, no. 5, pp. 690–696, 2009. View at Google Scholar · View at Scopus
  9. R. E. Philleo, “Comparison of results of three methods for determining Young's modulus of elasticity of concrete,” International Concrete Abstracts Portal, vol. 51, no. 1, pp. 461–469, 1955. View at Google Scholar
  10. A. M. Neville, Properties of Concrete, John Wiley & Sons, New York, NY, USA, 4th edition, 1997.
  11. F. D. Lydon and R. V. Balendran, “Some observations on elastic properties of plain concrete,” Cement and Concrete Research, vol. 16, no. 3, pp. 314–324, 1986. View at Publisher · View at Google Scholar · View at Scopus
  12. B. S. Institute, “Structural use of concrete—part 2: code of practice for special circumstance,” BS 8110-2:1995, BSI, London, UK, 1995. View at Google Scholar
  13. S. Popovics, “Verification of relationships between mechanical properties of concrete-like materials,” Materials and Structures, vol. 8, no. 3, pp. 183–191, 1975. View at Google Scholar
  14. ASTM C191, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM, 2014.
  15. ASTM, “Standard practice for making and curing concrete test specimen in the field,” ASTM C31, ASTM International, 2012. View at Google Scholar
  16. ASTM International, “Standard test method for fundamental transverse, longitudinal, and torsional resonant frequencies of concrete specimens,” ASTM C215, ASTM International, West Conshohocken, Pa, USA, 2002. View at Google Scholar
  17. P.-C. Aitcin and P. K. Mehta, “Effect of coarse-aggregate characteristics on mechanical properties of high-strength concrete,” ACI Materials Journal, vol. 87, no. 2, pp. 103–107, 1990. View at Google Scholar · View at Scopus
  18. P.-C. Aitcin, B. Miao, W. D. Cook, and D. Mitchell, “Effects of size and curing on cylinder compressive strength of normal and high-strength concretes,” ACI Materials Journal, vol. 91, pp. 349–354, 1994. View at Google Scholar
  19. P. M. Carrasquillo and R. L. Carrasquillo, “Evaluation of the use of current concrete practice in the production of high strength concrete,” ACI Materials Journal, vol. 85, no. 1, pp. 49–54, 1988. View at Google Scholar
  20. R. L. Carrasquillo, A. H. Nilson, and F. O. Slate, “Properties of high strength concrete subject to short-term loads,” Journal of the American Concrete Institute, vol. 78, no. 3, pp. 171–178, 1981. View at Google Scholar · View at Scopus
  21. J. E. Cook, “10000 psi concrete,” Concrete International, vol. 11, pp. 67–75, 1989. View at Google Scholar
  22. A. S. Malaikah, “A proposed relationship for the modulus of elasticity of high strength concrete using local materials in Riyadh,” Journal of King Saud University—Engineering Sciences, vol. 17, pp. 1–11, 2005. View at Google Scholar
  23. A. Mokhtarzadeh and C. French, “Mechanical properties of high-strength concrete with consideration for precast applications,” ACI Materials Journal, vol. 97, no. 2, pp. 136–147, 2000. View at Google Scholar · View at Scopus
  24. D. Vandergrift Jr. and A. K. Schindler, “The effect of test cylinder size on the compressive strength of sulfur capped concrete specimens,” Tech. Rep. IR-06-01, Highway Research Center and Department of Civil Engineering at Auburn University, Auburn, Ala, USA, 2006. View at Google Scholar
  25. ASTM International, “Standard test method for compressive strength of cylindrical concrete specimens,” ASTM C39, ASTM International, West Conshohocken, Pa, USA, 2014. View at Google Scholar
  26. ASTM, “Standard test method for pulse velocity through concrete,” ASTM C597, ASTM International, 1997. View at Google Scholar
  27. N. J. Carino, W. F. Guthrie, E. S. Lagergren, and G. M. Mullings, “Effects of testing variables on the strength of high-strength (90MPa) concrete cylinders,” in High-Performance Concrete, V. M. Malhotra, Ed., SP-149, pp. 589–632, American Concrete Institute, Farmington Hills, Mich, USA, 1994. View at Google Scholar
  28. ACI, “Guide for evaluation of strength test results of concrete (ACI 214R-11),” ASTM C214, American Concrete Institute, Farmington Hills, Mich, USA, 2011. View at Google Scholar
  29. ACI Committee 228, “Nondestructive test methods for evaluation of concrete in structures,” Report ACI 228.2R-98, American Concrete Institute, Farmington Hills, Mich, USA, 1998. View at Google Scholar
  30. S. A. Issa, M. S. Islam, M. A. Issa, A. A. Yousif, and M. A. Issa, “Specimen and aggregate size effect on concrete compressive strength,” Cement Concrete and Aggregates, vol. 22, no. 2, pp. 103–115, 2000. View at Publisher · View at Google Scholar