Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 586264, 19 pages
http://dx.doi.org/10.1155/2015/586264
Research Article

Locally Corroded Stiffener Effect on Shear Buckling Behaviors of Web Panel in the Plate Girder

1Department of Ocean Civil Engineering, Chonnam National University, Yeosu, Jeonnam 550-749, Republic of Korea
2Department of Civil Engineering, Pusan National University, Busan 609-735, Republic of Korea
3Department of Civil Engineering, Gyeongnam National University of Science and Technology, Jinju, Gyeongnam 660-758, Republic of Korea

Received 15 April 2015; Revised 17 June 2015; Accepted 25 June 2015

Academic Editor: Antônio G. B. de Lima

Copyright © 2015 Jungwon Huh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. National Institute for Land and Infrastructure Management, “Research on local corrosion of highway steel bridges,” Technical Note 294, National Institute for Land and Infrastructure Management, 2006 (Japanese).
  2. I.-T. Kim, M.-J. Lee, J.-H. Ahn, and S. Kainuma, “Experimental evaluation of shear buckling behaviors and strength of locally corroded web,” Journal of Constructional Steel Research, vol. 83, pp. 75–89, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. J.-H. Ahn, I.-T. Kim, S. Kainuma, and M.-J. Lee, “Residual shear strength of steel plate girder due to web local corrosion,” Journal of Constructional Steel Research, vol. 89, pp. 198–212, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. T. Shimozato, Y. Tamaki, J. Murakoshi, and M. Takahasi, “Real time monitoring of bridge collapse due to intense corrosion,” Magazine of Korean Society of Steel Construction, vol. 22, no. 5, pp. 13–17, 2010 (Korean). View at Google Scholar
  5. D. M. Porter, K. C. Rockey, and H. R. Evans, “The collapse behavior of plate girders loaded in shear,” Structural Engineer, vol. 53, no. 8, pp. 313–325, 1975. View at Google Scholar · View at Scopus
  6. S. C. Lee, J. S. Davidson, and C. H. Yoo, “Shear buckling coefficients of plate girder web panels,” Computers & Structures, vol. 59, no. 5, pp. 789–795, 1996. View at Publisher · View at Google Scholar · View at Scopus
  7. S.-K. Jung and D. W. White, “Shear strength of horizontally curved steel I-girders—finite element analysis studies,” Journal of Constructional Steel Research, vol. 62, no. 4, pp. 329–342, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. I. Estrada, E. Real, and E. Mirambell, “Shear resistance in stainless steel plate girders with transverse and longitudinal stiffening,” Journal of Constructional Steel Research, vol. 64, no. 11, pp. 1239–1254, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. N. C. Hagen and P. K. Larsen, “Shear capacity of steel plate girders with large web openings—part II: design guidelines,” Journal of Constructional Steel Research, vol. 65, no. 1, pp. 151–158, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. M. F. Hassanein, “Finite element investigation of shear failure of lean duplex stainless steel plate girders,” Thin-Walled Structures, vol. 49, no. 8, pp. 964–973, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. M. M. Alinia, A. Gheitasi, and M. Shakiba, “Postbuckling and ultimate state of stresses in steel plate girders,” Thin-Walled Structures, vol. 49, no. 4, pp. 455–464, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Bedynek, E. Real, and E. Mirambell, “Tapered plate girders under shear: tests and numerical research,” Engineering Structures, vol. 46, pp. 350–358, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. J.-H. Ahn, S. Kainuma, and I.-T. Kim, “Shear failure behaviors of a web panel with local corrosion depending on web boundary conditions,” Thin-Walled Structures, vol. 73, pp. 302–317, 2013. View at Publisher · View at Google Scholar · View at Scopus
  14. T. E. Dunbar, N. Pegg, F. Taheri, and L. Jiang, “A computational investigation of the effects of localized corrosion on plates and stiffened panels,” Marine Structures, vol. 17, no. 5, pp. 385–402, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. D. Ok, Y. Pu, and A. Incecik, “Computation of ultimate strength of locally corroded unstiffened plates under uniaxial compression,” Marine Structures, vol. 20, no. 1-2, pp. 100–114, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Rahgozar, “Remaining capacity assessment of corrosion damaged beams using minimum curves,” Journal of Constructional Steel Research, vol. 65, no. 2, pp. 299–307, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. J. E. Silva, Y. Garbatov, and C. Guedes Soares, “Ultimate strength assessment of rectangular steel plates subjected to a random localised corrosion degradation,” Engineering Structures, vol. 52, pp. 295–305, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. J.-H. Ahn, W.-H. Lee, and I.-T. Kim, “Shear buckling of the web panel in the plate girder with circular local section damage,” in Proceedings of the 25th Annual Conference Korean Society of Steel Construction, vol. 25, pp. 91–92, 2014 (Korean).
  19. S. P. Timoshenko and J. M. Gere, Theory of Elastic Stability, McGraw-Hill, New York, NY, USA, 2nd edition, 1961. View at MathSciNet
  20. American Institute of Steel Construction, Seismic Provisions for Structural Steel Buildings, AISC, Chicago, Ill, USA, 2005.
  21. American Association of State Highway and Transportation Officials, LRFD Bridge Design Specifications, AASHTO, Washington, DC, USA, 1st edition, 1994.