Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015, Article ID 703029, 10 pages
http://dx.doi.org/10.1155/2015/703029
Research Article

Physical and Mechanical Properties of Composites Made with Aluminous Cement and Basalt Fibers Developed for High Temperature Application

1Experimental Centre, Faculty of Civil Engineering, Czech Technical University in Prague, Thákurova 7, 166 29 Prague 6, Czech Republic
2University Centre for Energy Efficient Buildings, Czech Technical University in Prague, Třinecká 1024, 273 43 Bustehrad, Czech Republic

Received 2 March 2015; Revised 28 April 2015; Accepted 11 May 2015

Academic Editor: Antônio G. B. de Lima

Copyright © 2015 Pavel Reiterman et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Černý, J. Poděbradská, J. Toman et al., “High temperature properties of fibre reinforced cement composites,” in Proceedings of the International Conference on Application of Codes, Design and Regulations, pp. 403–412, July 2005. View at Scopus
  2. Y. Fu and L. Li, “Study on mechanism of thermal spalling in concrete exposed to elevated temperatures,” Materials and Structures, vol. 44, no. 1, pp. 361–376, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. Y. B. Jiao, H. B. Liu, X. Q. Wang, Y. W. Zhang, G. B. Luo, and Y. F. Gong, “Temperature effect on mechanical properties and damage identification of concrete structure,” Advances in Materials Science and Engineering, vol. 2014, Article ID 191360, 10 pages, 2014. View at Publisher · View at Google Scholar
  4. E. Vejmelková and R. Černý, “Thermal properties of PVA-Fiber reinforced cement composites at high temperatures,” Applied Mechanics and Materials, vol. 377, pp. 45–49, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. Z. J. Li, X. M. Zhou, and B. Shen, “Fiber-cement extrudates with perlite subjected to high temperatures,” Journal of Materials in Civil Engineering, vol. 16, no. 3, pp. 221–229, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. A. M. Neville, Properties of Concrete, Prentice Hall, 5th edition, 2012.
  7. E. Vejmelková, P. Konvalinka, P. Padevět, and R. Černý, “Thermophysical and mechanical properties of fiber-reinforced composite material subjected to high temperatures,” Journal of Civil Engineering and Management, vol. 16, no. 3, pp. 395–400, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. C. Jiang, K. Fan, F. Wu, and D. Chen, “Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete,” Materials and Design, vol. 58, pp. 187–193, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. P. Banibayat and A. Patnaik, “Variability of mechanical properties of basalt fiber reinforced polymer bars manufactured by wet-layup method,” Materials and Design, vol. 56, pp. 898–906, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Ma, T. Sugahara, Y. Yang, and H. Hamada, “A study on the energy absorption properties of carbon/aramid fiber filament winding composite tube,” Composite Structures, vol. 123, pp. 301–311, 2015. View at Publisher · View at Google Scholar
  11. V. Slivka and M. Vavro, “The significance of textural and structural properties of north-moravian basaltoids for the manufacture of mineral fibres,” Ceramics, vol. 40, no. 4, pp. 149–159, 1996. View at Google Scholar · View at Scopus
  12. T. Jung and R. V. Subramanian, “Strengthening of basalt fiber by alumina addition,” Scripta Metallurgica et Materiala, vol. 28, no. 4, pp. 527–532, 1993. View at Publisher · View at Google Scholar · View at Scopus
  13. B. Perevozchikova, A. Pisciotta, B. Osovetsky, E. Menshikov, and K. Kazymov, “Quality evaluation of the kuluevskaya basalt outcrop for the production of mineral fiber, Southern Urals, Russia,” Energy Procedia, vol. 59, pp. 309–314, 2014. View at Publisher · View at Google Scholar
  14. S. I. Gutnikov, M. S. Manylov, Y. V. Lipatov, B. I. Lazoryak, and K. V. Pokholok, “Effect of the reduction treatment on the basalt continuous fiber crystallization properties,” Journal of Non-Crystalline Solids, vol. 368, no. 1, pp. 45–50, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Mateo, C. Pérez-Carramiñana, and S. Chinchón, “Varieties of asbestos in buildings and risks associated with the work of deconstruction,” Informes de la Construccion, vol. 65, no. 531, pp. 311–324, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. G. Landucci, F. Rossi, C. Nicolella, and S. Zanelli, “Design and testing of innovative materials for passive fire protection,” Fire Safety Journal, vol. 44, no. 8, pp. 1103–1109, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. V. Dhand, G. Mittal, K. Y. Rhee, S. Park, and D. Hui, “A short review on basalt fiber reinforced polymer composites,” Composites Part B: Engineering, vol. 73, pp. 166–180, 2015. View at Publisher · View at Google Scholar
  18. M. Jogl, P. Reiterman, O. Holčapek, and J. Koťátková, “Effects of high temperature treatment on the mechanical properties of basalt fiber reinforced aluminous composites,” Applied Mechanics and Materials, vol. 732, pp. 111–114, 2015. View at Publisher · View at Google Scholar
  19. V. A. Rybin, A. V. Utkin, and N. I. Baklanova, “Alkali resistance, microstructural and mechanical performance of zirconia-coated basalt fibers,” Cement and Concrete Research, vol. 53, pp. 1–8, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. S. Baştürk, H. Uyanık, and Z. Kazancı, “An analytical model for predicting the deflection of laminated basalt composite plates under dynamic loads,” Composite Structures, vol. 116, pp. 273–285, 2014. View at Publisher · View at Google Scholar
  21. J. Krassowska and A. Lapko, “The influence of basalt fibers on the shear and flexural capacity of reinforced concrete continuous beams,” in Proceedings of the 1st International Conference for Ph.D. Students in Civil Engineering (CE-PhD '12), Cluj-Napoca, Romania, November 2012.
  22. P. K. Mehta and P. J. Monteiro, Concrete: Microstructure, Properties, and Materials, 2006.
  23. P. C. Hewlett, Ed., Lea's Chemistry of Cement and Concrete, Elsevier, Oxford, UK, 4th edition, 2004.
  24. O. Holčapek, P. Reiterman, F. Vogel, E. Vejmelková, and P. Konvalinka, “Mechanical properties of aluminous paste at high temperature,” in Research and Applications in Structure Engineering, Mechanics and Computation, CRC Press, Leiden, The Netherlands, Balkema, Cape Town, South Africa, 2013. View at Google Scholar
  25. T. M. Kula, M. D. Meiser, and R. E. Tressler, “Curing temperature and humidity effects on the strength of an aluminous cement,” Cement and Concrete Research, vol. 10, no. 4, pp. 491–497, 1980. View at Publisher · View at Google Scholar · View at Scopus
  26. G. A. Khoury, “Effect of fire on concrete and concrete structures,” Progress in Structural Engineering and Materials, vol. 2, no. 4, pp. 429–447, 2000. View at Publisher · View at Google Scholar
  27. E. Vejmelková, M. Keppert, P. Rovnaníková, M. Ondráček, Z. Keršner, and R. Černý, “Properties of high performance concrete containing fine-ground ceramics as supplementary cementitious material,” Cement and Concrete Composites, vol. 34, no. 1, pp. 55–61, 2012. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Drdácký, F. Fratini, D. Frankeová, and Z. Slížková, “The Roman mortars used in the construction of the Ponte di Augusto (Narni, Italy)—a comprehensive assessment,” Construction and Building Materials, vol. 38, pp. 1117–1128, 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. M. D. Jackson, E. N. Landis, P. F. Brune et al., “Mechanical resilience and cementitious processes in Imperial Roman architectural mortar,” Proceedings of the National Academy of Sciences of the United States of America, vol. 111, no. 52, pp. 18484–18489, 2014. View at Publisher · View at Google Scholar
  30. E. Vejmelková, M. Keppert, P. Rovnaníková, Z. Keršner, and R. Černý, “Properties of lime composites containing a new type of pozzolana for the improvement of strength and durability,” Composites Part B: Engineering, vol. 43, no. 8, pp. 3534–3540, 2012. View at Publisher · View at Google Scholar · View at Scopus
  31. L. Bodnárová, T. Jarolim, J. Válek, J. Brožovský, and R. Hela, “Selected properties of cementitous composites with Portland cements and blended Portland cements in extreme conditions,” Applied Mechanics and Materials, vol. 507, pp. 443–448, 2014. View at Publisher · View at Google Scholar · View at Scopus
  32. J. M. R. Mercury, A. H. de Aza, X. Turrillas, and P. Pena, “Calcium aluminate cements hydration. Part II: effect of silica and alumina additions,” Boletín de la Sociedad Española de Cerámica y Vidrio, vol. 42, no. 6, pp. 361–368, 2003. View at Publisher · View at Google Scholar · View at Scopus
  33. A. H. López, J. L. G. Calvo, J. G. Olmo, S. Petit, and M. C. Alonso, “Microstructural evolution of calcium aluminate cements hydration with silica fume and fly ash additions by scanning electron microscopy, and mid and near-infrared spectroscopy,” Journal of the American Ceramic Society, vol. 91, no. 4, pp. 1258–1265, 2008. View at Publisher · View at Google Scholar · View at Scopus
  34. E. Breval, “C3A hydration,” Cement and Concrete Research, vol. 6, no. 1, pp. 129–137, 1976. View at Publisher · View at Google Scholar · View at Scopus
  35. L. Fernández-Carrasco, M. T. Blanco-Varela, F. Puertas, T. Vázquez, F. P. Glasser, and E. Lachowski, “Hydration of high alumina cement in the presence of alkalis,” Advances in Cement Research, vol. 12, no. 4, pp. 143–152, 2000. View at Publisher · View at Google Scholar · View at Scopus
  36. B. Pacewska, M. Nowacka, I. Wilińska, W. Kubissa, and V. Antonovich, “Studies on the influence of spent FCC catalyst on hydration of calcium aluminate cements at ambient temperature,” Journal of Thermal Analysis and Calorimetry, vol. 105, no. 1, pp. 129–140, 2011. View at Publisher · View at Google Scholar · View at Scopus
  37. M. Cyr, M. Trinh, B. Husson, and G. Casaux-Ginestet, “Effect of cement type on metakaolin efficiency,” Cement and Concrete Research, vol. 64, pp. 63–72, 2014. View at Publisher · View at Google Scholar
  38. J. Ding, Y. Fu, and J. J. Beaudoin, “Strätlingite formation in high alumina cement—silica fume systems: Significance of sodium ions,” Cement and Concrete Research, vol. 25, no. 6, pp. 1311–1319, 1995. View at Publisher · View at Google Scholar · View at Scopus
  39. M. Jogl, P. Reiterman, O. Holčapek, and J. Koťátková, “Influence of high-temperature on polycarboxylate superplasticizer in aluminous cement based fibre composites,” Advanced Materials Research, vol. 982, pp. 125–129, 2014. View at Publisher · View at Google Scholar
  40. Czech Standard CSN EN 196-1 Methods of testing cement—Part 1: Determination of strength, 2005.
  41. N. Kabay, “Abrasion resistance and fracture energy of concretes with basalt fiber,” Construction and Building Materials, vol. 50, pp. 95–101, 2014. View at Publisher · View at Google Scholar · View at Scopus
  42. RILEM, “Determination of the fracture energy of mortars and concrete by means of free-point bend test on notched beams,” Materials and Structures, vol. 18, no. 106, pp. 285–290, 1985. View at Google Scholar
  43. O. Holčapek, P. Reiterman, and P. Konvalinka, “Fracture characteristics of refractory composites containing metakaolin and ceramic fibers,” Advances in Mechanical Engineering, vol. 7, no. 3, pp. 1–13, 2015. View at Publisher · View at Google Scholar