Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2015 (2015), Article ID 860454, 4 pages
http://dx.doi.org/10.1155/2015/860454
Research Article

Finite Element Analysis on the Creep Constitutive Equation of High Modulus Asphalt Concrete

1School of Civil Engineering and Architecture, Zhejiang Sci-Tech University, Hangzhou 310018, China
2College of Environmental and Civil Engineering, Nanyang Technological University, Block Ni, Nanyang Avenue, Singapore 639798

Received 8 April 2015; Revised 25 June 2015; Accepted 6 July 2015

Academic Editor: Ana S. Guimarães

Copyright © 2015 Xiu-shan Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J.-F. Corté, “Development and uses of hard-grade asphalt and of high-modulus asphalt mixes in france,” in Proceedings of the Transportation Research Board, pp. 12–31, Washington, DC, USA, December 2001.
  2. J. Cheng and X. Qian, “Temperature-dependent viscoelastic model for asphalt concrete using discrete rheological representation,” Construction and Building Materials, vol. 93, pp. 157–165, 2015. View at Publisher · View at Google Scholar
  3. Q. Zhou, A. Sha, and Q. Yang, “Experimental study on mechanical properties of high modulus asphalt concrete,” Journal of Zhengzhou University: Engineering Science, vol. 29, no. 1, pp. 128–131, 2008. View at Google Scholar
  4. J. Chen, M. Zhang, H. Wang, and L. Li, “Evaluation of thermal conductivity of asphalt concrete with heterogeneous microstructure,” Applied Thermal Engineering, vol. 84, pp. 368–374, 2015. View at Publisher · View at Google Scholar
  5. S. M. J. G. Erkens, X. Liu, and A. Scarpas, “3D finite element model for asphalt concrete response simulation,” International Journal of Geomechanics, vol. 2, no. 3, pp. 305–330, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Chen, C. Zhou, and Z. Wang, “Data processing and viscoelastic computation for creep test of asphalt mixture,” Journal of Southeast University (Natural Science Edition), vol. 37, no. 6, pp. 1091–1095, 2007. View at Google Scholar · View at Scopus
  7. V. Subramanian, M. N. Guddati, and Y. Richard Kim, “A viscoplastic model for rate-dependent hardening for asphalt concrete in compression,” Mechanics of Materials, vol. 59, pp. 142–159, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Hibbitte, ABAQUS User Subroutines Reference Manual, HKS, Dallas, Tex, USA, 2005.
  9. Ministry of Transportation of People's Republic of China, “Highway asphalt pavement construction technology specifications,” Tech. Rep. JTG F98-140, China Communications Press, Beijing, China, 2004. View at Google Scholar
  10. M. F. Granata, P. Margiotta, and M. Arici, “Simplified procedure for evaluating the effects of creep and shrinkage on prestressed concrete girder bridges and the application of European and north American prediction models,” Journal of Bridge Engineering, vol. 18, no. 12, pp. 1281–1297, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. T. B. Moghaddam, M. Soltani, and M. R. Karim, “Evaluation of permanent deformation characteristics of unmodified and Polyethylene Terephthalate modified asphalt mixtures using dynamic creep test,” Materials & Design, vol. 53, pp. 317–324, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Mehmanparast, C. M. Davies, G. A. Webster, and K. M. Nikbin, “Creep crack growth rate predictions in 316H steel using stress dependent creep ductility,” Materials at High Temperatures, vol. 31, no. 1, pp. 84–94, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Ganesh Kumar and M. D. Mathew, “Finite element analysis of plastic deformation during impression creep,” Journal of Materials Engineering and Performance, vol. 24, no. 4, pp. 1741–1753, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. E. Coleri, J. T. Harvey, K. Yang, and J. M. Boone, “Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures,” Construction and Building Materials, vol. 30, pp. 783–793, 2012. View at Publisher · View at Google Scholar · View at Scopus
  15. G. Harran and A. Shalaby, “Improving the prediction of the dynamic modulus of fine-graded asphalt concrete mixtures at high temperatures,” Canadian Journal of Civil Engineering, vol. 36, no. 2, pp. 180–190, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Espersson, “Effect in the high modulus asphalt concrete with the temperature,” Construction and Building Materials, vol. 71, pp. 638–643, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. S. S. Yakovlev, S. N. Larin, Y. A. Sobolev, and V. I. Platonov, “Isothermal deformation of dome-shaped shells made of high-strength anisotropic materials in the presence of creep,” Russian Engineering Research, vol. 35, no. 2, pp. 116–120, 2015. View at Publisher · View at Google Scholar
  18. X.-Y. Zhu, X. Wang, and Y. Yu, “Micromechanical creep models for asphalt-based multi-phase particle-reinforced composites with viscoelastic imperfect interface,” International Journal of Engineering Science, vol. 76, pp. 34–46, 2014. View at Publisher · View at Google Scholar · View at Scopus