Advances in Materials Science and Engineering
Volume 2015, Article ID 871602, 10 pages
http://dx.doi.org/10.1155/2015/871602
Weld Inspection Based on Radiography Image Segmentation with Level Set Active Contour Guided Off-Center Saliency Map
University of Tunis, Tunis National Higher School of Engineering (ENSIT), Research CEREP Unit, 5 Avenue Taha Hussein, 1008 Tunis, Tunisia
Received 7 September 2015; Revised 28 November 2015; Accepted 30 November 2015
Academic Editor: Ying Li
Copyright © 2015 Mohamed Ben Gharsallah and Ezzeddine Ben Braiek. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
Mohamed Ben Gharsallah and Ezzeddine Ben Braiek, “Weld Inspection Based on Radiography Image Segmentation with Level Set Active Contour Guided Off-Center Saliency Map,” Advances in Materials Science and Engineering, vol. 2015, Article ID 871602, 10 pages, 2015. https://doi.org/10.1155/2015/871602.