Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 1627103, 15 pages
https://doi.org/10.1155/2017/1627103
Research Article

Macro-Micro Failure Mechanisms and Damage Modeling of a Bolted Rock Joint

1Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China
2State Key Laboratory of Mining Disaster Prevention and Control Co-Founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao 266590, China
3Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan, Shandong 250061, China
4College of Pipeline and Civil Engineering, China University of Petroleum, Qingdao 266555, China

Correspondence should be addressed to Gang Wang; moc.liamg@0111gnaggnaw

Received 15 December 2016; Revised 3 June 2017; Accepted 28 June 2017; Published 31 August 2017

Academic Editor: Fernando Lusquiños

Copyright © 2017 Gang Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [4 citations]

The following is the list of published articles that have cited the current article.

  • J Shang, Y Gui, and Z Zhao, “Broad-spectrum fracture toughness of an anisotropic sandstone under mixed-mode loading,” Theoretical and Applied Fracture Mechanics, 2018. View at Publisher · View at Google Scholar
  • J. Shang, Y. Yokota, Z. Zhao, and W. Dang, “DEM simulation of mortar-bolt interface behaviour subjected to shearing,” Construction and Building Materials, vol. 185, pp. 120–137, 2018. View at Publisher · View at Google Scholar
  • Wei Han, Yujing Jiang, Hengjie Luan, Dong Wang, and Changsheng Wang, “Failure Mechanism and Acoustic Emission Characteristics of Rock Specimen with Edge Crack Under Uniaxial Compression,” Geotechnical and Geological Engineering, 2018. View at Publisher · View at Google Scholar
  • Qianbing Zhang, Ranjith, Rangang Yu, Chenchen Huang, Gang Wang, Wendong Yang, and Guangyu Luo, “A damage mechanical model applied to analysis of mechanical properties of jointed rock masses,” Tunnelling and Underground Space Technology, vol. 84, pp. 113–128, 2019. View at Publisher · View at Google Scholar