Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 1627103, 15 pages
https://doi.org/10.1155/2017/1627103
Research Article

Macro-Micro Failure Mechanisms and Damage Modeling of a Bolted Rock Joint

1Shandong Provincial Key Laboratory of Civil Engineering Disaster Prevention and Mitigation, Shandong University of Science and Technology, Qingdao 266590, China
2State Key Laboratory of Mining Disaster Prevention and Control Co-Founded by Shandong Province and the Ministry of Science and Technology, Shandong University of Science and Technology, Qingdao 266590, China
3Research Center of Geotechnical and Structural Engineering, Shandong University, Jinan, Shandong 250061, China
4College of Pipeline and Civil Engineering, China University of Petroleum, Qingdao 266555, China

Correspondence should be addressed to Gang Wang; moc.liamg@0111gnaggnaw

Received 15 December 2016; Revised 3 June 2017; Accepted 28 June 2017; Published 31 August 2017

Academic Editor: Fernando Lusquiños

Copyright © 2017 Gang Wang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. D. Patton, “Multiple modes of shear failure in rock,” in Proceedings of the 1st Congress on International Society for Rock Mechanics, pp. 509–513, 1966. View at Google Scholar
  2. R. E. Goodman, Methods of Geological Engineering in Discontinuous Rocks, West Publishing Company, New York, NY, USA, 1976.
  3. N. Barton and V. Choubey, “The shear strength of rock joints in theory and practice,” Rock Mechanics Felsmechanik Mécanique des Roches, vol. 10, no. 1-2, pp. 1–54, 1977. View at Publisher · View at Google Scholar · View at Scopus
  4. P. M. Dight and H. K. Chiu, “Prediction of shear behavior of joints using profiles,” International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, vol. 18, no. 5, pp. 369–386, 1981. View at Google Scholar
  5. N. Barton, Modelling Rock Joint Behaviour from In Situ Block Tests: Implications for Nuclear Waste Repository Design, vol. 308, Office of Nuclear Waste Isolation, ONWI, Columbus, OH, USA, 1982.
  6. T. Esaki, S. Du, Y. Jiang, and Y. Wada, “Effect of the asperity damage on the shear behavior of irregular rock joints,” in Proceedings of the Second International Conference on Analysis of Discontinuous Deformation, pp. 459–464, Kyoto, Japan, 1997.
  7. Y. Jiang, J. Xiao, Y. Tanabashi, and T. Mizokami, “Development of an automated servo-controlled direct shear apparatus applying a constant normal stiffness condition,” International Journal of Rock Mechanics and Mining Sciences, vol. 41, no. 2, pp. 275–286, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. J. Jiang, B. Li, and Y. Tanabashi, “Estimating the relation between surface roughness and mechanical properties of rock joints,” International Journal of Rock Mechanics and Mining Sciences, vol. 43, no. 6, pp. 837–846, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. C.-C. Xia, Z.-C. Tang, W.-M. Xiao, and Y.-L. Song, “New peak shear strength criterion of rock joints based on quantified surface description,” Rock Mechanics and Rock Engineering, vol. 47, no. 2, pp. 387–400, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Bjurström, “Shear strength of hard rock joints reinforced by grouted untensioned bolts,” in Proceedings of the In Proceedings of the 3rd International ISRM Congress, pp. 1194–1199, Denver, Colo, USA, 1974.
  11. X. Ge and J. Liu, “Study of the shear resistance behaviour of bolted rock joints,” Journal of Geotechnical Engineering, vol. 10, no. 1, pp. 8–19, 1988 (Chinese). View at Google Scholar
  12. K. Spang and P. Egger, “Action of fully-grouted bolts in jointed rock and factors of influence,” Rock Mechanics and Rock Engineering, vol. 23, no. 3, pp. 201–229, 1990. View at Publisher · View at Google Scholar · View at Scopus
  13. P. Egger and L. Zabuski, “Behaviour of rough bolted joints in direct shear tests,” in Proceedings of the 7th ISRM Congress, vol. 30, p. 342, Aachen, Germany, September 1991. View at Publisher · View at Google Scholar
  14. A. M. Ferrero, “The shear strength of reinforced rock joints,” International Journal of Rock Mechanics and Mining Sciences and, vol. 32, no. 6, pp. 595–605, 1995. View at Publisher · View at Google Scholar · View at Scopus
  15. F. Pellet and P. Egger, “Analytical model for the mechanical behaviour of bolted rock joints subjected to shearing,” Rock Mechanics and Rock Engineering, vol. 29, no. 2, pp. 73–97, 1996. View at Publisher · View at Google Scholar · View at Scopus
  16. H. Jalalifar and N. Aziz, “Experimental and 3D numerical simulation of reinforced shear joints,” Rock Mechanics and Rock Engineering, vol. 43, no. 1, pp. 95–103, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. P. Wang, T. Feng, Y.-J. Zhu, and W.-J. Yu, “Experimental study and numerical simulation of anchoring mechanism of anchored rocklike material with prefabricated fracture,” Yantu Lixue/Rock and Soil Mechanics, vol. 37, no. 3, pp. 793–801, 2016 (Chinese). View at Publisher · View at Google Scholar · View at Scopus
  18. L. Li, P. C. Hagan, S. Saydam, B. Hebblewhite, and Y. Li, “Parametric study of rockbolt shear behaviour by double shear test,” Rock Mechanics and Rock Engineering, vol. 49, no. 12, pp. 4787–4797, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. Itasca Consulting Group Inc, “PFC2D (Particle Flow Code in 2D) Theory and Background,” Minneapolis, Minn, USA, 2008.
  20. P. A. Cundall and O. D. L. Strack, “The distinct numerical model for granular assemblies,” Geotechnique, vol. 29, no. 1, pp. 47–65, 1979. View at Publisher · View at Google Scholar · View at Scopus
  21. J. Zhou and Y. Chi, “The method of particle flow and PFC2D code,” Rock and Soil Mechanics, vol. 21, no. 3, pp. 271–274, 2000 (Chinese). View at Google Scholar
  22. D. O. Potyondy and P. A. Cundall, “A bonded-particle model for rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 41, no. 8, pp. 1329–1364, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. N. Cho, C. D. Martin, and D. C. Sego, “A clumped particle model for rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 7, pp. 997–1010, 2007. View at Publisher · View at Google Scholar · View at Scopus
  24. Z. Zhao, L. Jing, and I. Neretnieks, “Particle mechanics model for the effects of shear on solute retardation coefficient in rock fractures,” International Journal of Rock Mechanics and Mining Sciences, vol. 52, pp. 92–102, 2012. View at Publisher · View at Google Scholar · View at Scopus
  25. C. Xia, Y. Song, Z. Tang, Y. Song, and C. Shou, “Particle flow numerical simulation for shear behavior of rough joints,” Chinese Journal of Rock Mechanics and Engineering, vol. 31, no. 8, pp. 1545–1552, 2012 (Chinese). View at Google Scholar · View at Scopus
  26. Y. Zhou, A. Misra, S. Wu, and X. Zhang, “Macro- and meso-analyses of rock joint direct shear test using particle flow theory,” Chinese Journal of Rock Mechanics and Engineering, vol. 31, no. 6, pp. 1245–1256, 2012. View at Google Scholar · View at Scopus
  27. R. H. Cao, P. Cao, H. Lin, K. Zhang, and X. W. Tan, “Particle flow analysis of direct shear tests on joints with different roughness,” Rock and Soil Mechanics, vol. 34, supplement 2, pp. 456–464, 2013 (Chinese). View at Google Scholar