Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 1651753, 13 pages
https://doi.org/10.1155/2017/1651753
Research Article

Evaluating the Dynamic Elastic Modulus of Concrete Using Shear-Wave Velocity Measurements

1R&D Center, JNTINC Co. Ltd., 9 Hyundaikia-ro, 830 Beon-gil, Bibong-Myeon, Hwaseong, Gyeonggi-do 18284, Republic of Korea
2Department of Architectural Engineering, Dong-A University, 37 Nakdong-Daero, 550 Beon-gil, Saha-gu, Busan 49315, Republic of Korea
3Department of Safety Engineering, Incheon National University, 119 Academy-ro, Yeonsu-gu, Incheon 22012, Republic of Korea
4Department of Civil Engineering, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon 34134, Republic of Korea

Correspondence should be addressed to Seong-Hoon Kee; rk.ca.uad@eekhs

Received 4 January 2017; Revised 27 April 2017; Accepted 2 May 2017; Published 24 July 2017

Academic Editor: Giorgio Pia

Copyright © 2017 Byung Jae Lee et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. S. Popovics, “A study of static and dynamic modulus of elasticity of concrete,” in ACI-CRC Final Report, 2008. View at Google Scholar
  2. P. K. Mehta and P. J. M. Monteiro, Concrete-Microstructure, Properties, and Materials, McGraw-Hill, 3rd edition, 1993.
  3. ASTM C666/C666M-15, Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, West Conshohoken, Pa, USA, 2015.
  4. ASTM C597/C597M-16, Standard Test Method for Pulse Velocity through Concrete, West Conshohoken, Pa, USA, 2016.
  5. ASTM C215-14, Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens, West Conshohoken, Pa, USA, 2016.
  6. C469 A, Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression, West Conshohoken, Pa, USA, 2014.
  7. A. M. Neville, Properties of Concrete, John Wiley & Sons, New York, NY, USA, 4th edition, 1997.
  8. R. E. Philleo, “Comparison of results of three methods for determining Young's modulus of elasticity of concrete,” Journal of the Americal Concrete Institute, vol. 26, no. 5, pp. 461–469, 1955. View at Google Scholar
  9. F. D. Lydon and R. V. Balendran, “Some observations on elastic properties of plain concrete,” Cement and Concrete Research, vol. 16, no. 3, pp. 314–324, 1986. View at Publisher · View at Google Scholar · View at Scopus
  10. British Standard Institute., Structural Use of Concrete—Part 2: Code of Practice for Special Circumstance. BS 8110-2:1995, BSI, London, UK, 1985.
  11. S. Popovics, “Verification of relationships between mechanical properties of concrete-like materials,” Matériaux and Constructions, vol. 8, no. 3, pp. 183–191, 1975. View at Publisher · View at Google Scholar · View at Scopus
  12. K. F. Graff, Wave Motion in Elastic Solids, Dover publications, INC., New York, NY, USA, 4th edition, 1991.
  13. M. Cha and G.-C. Cho, “Compression wave velocity of cylindrical rock specimens: engineering modulus interpretation,” The Japan Society of Applied Physics, vol. 46, no. 7B, pp. 4497–4499, 2007. View at Google Scholar
  14. B. J. Lee, S.-H. Kee, T. Oh, and Y.-Y. Kim, “Effect of cylinder size on the modulus of elasticity and compressive strength of concrete from static and dynamic tests,” Advances in Materials Science and Engineering, vol. 2015, Article ID 580638, 12 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. T. Voigt, G. Ye, Z. Sun, S. P. Shah, and K. Van Breugel, “Early age microstructure of Portland cement mortar investigated by ultrasonic shear waves and numerical simulation,” Cement and Concrete Research, vol. 35, no. 5, pp. 858–866, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Zhu, S.-H. Kee, D. Han, and Y.-T. Tsai, “Effects of air voids on ultrasonic wave propagation in early age cement pasets,” Cement and Concrete Research, vol. 41, no. 8, pp. 872–881, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. S. Liu, J. Zhu, S. Seraj, R. Cano, and M. Juenger, “Monitoring setting and hardening process of mortar and concrete using ultrasonic shear waves,” Construction and Building Materials, vol. 72, pp. 248–255, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Carette and S. Staquet, “Monitoring the setting process of mortars by ultrasonic P and S-wave transmission velocity measurement,” Construction and Building Materials, vol. 94, pp. 196–208, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. J. An, J. Nam, S. Kwon, and S. Joh, “Estimation of the compressive strength of concrete using shear wave velocity,” in Proceedings of the GeoHunan International Conference, Changsha, China, 2009. View at Publisher · View at Google Scholar
  20. D. Ciancio and M. Helinski, “The use of shear wave velocity for assessing strength development in fibre reinforced shortcrete,” in Proceeding of the 3rd International Conference on Engineering Developments in Shotcrete, CRC Press, Queenstown, New Zealand, 2010.
  21. U. Lencis, A. Udris, and A. Korjakins, “Decrease of the ultrasonic pulse velocity in concrete caused by reinforcement,” Journal of Materials Science and Engineering, vol. 1, pp. 1016–1028, 2011. View at Google Scholar
  22. A. A. Samokrutov, V. N. Kozlov, and V. G. Shevaldkin, “Ultrasonic low-frequency transdcers with dry dot contact and their applications for evaluation of concrete structures,” in Proceeding of the 8th European Conference on Nondestructive Testing Conference (ECNDT '02), Barcelona, Spain, June 2002.
  23. Y. H. Lee and T. Oh, “The measurement of P-, S-, and R-wave velocities to evaluate the condition of reinforced and prestressed concrete slabs,” Advances in Materials Science and Engineering, vol. 2016, Article ID 1548215, 14 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  24. A. O. De La Haza, A. A. Samokrutov, and P. A. Samokrutov, “Assessment of concrete structures using the Mira and Eyecon ultrasonic shear wave devices and the SAFT-C image reconstruction technique,” Construction and Building Materials, vol. 38, pp. 1276–1291, 2013. View at Publisher · View at Google Scholar · View at Scopus
  25. ASTM C31/C31M-12, Standard Practice for Making and Curing Concrete Test Specimen in the Field, West Conshohoken, Pa, USA, 2012.
  26. ASTM C39/C39M-14 A, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, West Conshohoken, Pa, USA, 2014.
  27. A. Alam and L. Haselbach, “Estimating the modulus of elasticity of pervious concrete based on porosity,” Advances in Civil Engineering Materials, vol. 3, no. 1, pp. 257–269, 2014. View at Publisher · View at Google Scholar
  28. J. S. Popovics and etal., “One-sided stress wave velocity measurement in concrete,” Journal of Engineering Mechanics-Asce, vol. 124, no. 12, pp. 1346–1353, 1998. View at Google Scholar
  29. J. Lin and M. Sansalone, “A procedure for determining P-wave speed in concrete for use in impact-echo testing using a Rayleigh wave speed measurement technique,” in Innovations in Nondestructive Testing of Concrete, SP-168, E. S. Pessiki and L. Olson, Eds., pp. 137–165, American Concrete Institute, Farmington Hills, Mich, USA, 1997. View at Google Scholar
  30. V. Barnett and T. Lewis, Outliers in Statistical Data, John Wiley & Sons, New York, NY, USA, 1994. View at MathSciNet
  31. ACI committee 214, Guide for Evaluation of Strength Test Results of Concrete (ACI 214R-11), Farmington Hills, Mich, USA, American Concrete Institute, 2011.
  32. ACI committee 228, “Nondestructive test methods for evaluation of concrete in structures,” Report ACI 228.2R-98, American Concrete Institute, Farmington Hills, Mich, USA, 1998. View at Google Scholar
  33. ENV 1992-1-1, Eurocode 2. Design of Concrete Structures-Part 1: General Rules and Rules for Buildings, 2004.
  34. ACI committee 318, Building Code Requirements for Structural Concrete (ACI 318-14) and Commentary, 2014.
  35. ACI committee 363, “State-of-the-art report on high-strength concrete,” ACI Journal Proceedings, vol. 84, no. 4, pp. 364–411, 1984. View at Google Scholar
  36. Comité Euro-International du Béton, “High-performance concrete, recommended extensions to the model code 90-research needs,” CEB Bulletin d'Information, p. 46, 1995. View at Google Scholar
  37. T. Noguchi, F. Tomosawa, K. M. Nemati, B. M. Chiaia, and A. P. Fantilli, “A practical equation for elastic modulus of concrete,” ACI Materials journal, vol. 106, no. 5, pp. 690–696, 2009. View at Google Scholar