Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 1691465, 13 pages
https://doi.org/10.1155/2017/1691465
Research Article

Statistical Model for the Mechanical Properties of Al-Cu-Mg-Ag Alloys at High Temperatures

1Mechanical Engineering Department, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
2Mechanical Engineering Department, King Abdulaziz University, Jeddah, Saudi Arabia
3Industrial Engineering Department, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia
4Physics & Astronomy Department, Faculty of Science, King Saud University, P.O. Box 2455, Riyadh 11451, Saudi Arabia
5King Abdullah Institute for Nanotechnology (KAIN), King Saud University, Riyadh, Saudi Arabia

Correspondence should be addressed to E. A. El-Danaf; as.ude.usk@fanade

Received 2 March 2017; Revised 15 May 2017; Accepted 1 June 2017; Published 9 July 2017

Academic Editor: Markus Bambach

Copyright © 2017 A. M. Al-Obaisi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

A. M. Al-Obaisi, E. A. El-Danaf, A. E. Ragab, M. S. Soliman, and A. N. Alhazaa, “Statistical Model for the Mechanical Properties of Al-Cu-Mg-Ag Alloys at High Temperatures,” Advances in Materials Science and Engineering, vol. 2017, Article ID 1691465, 13 pages, 2017. https://doi.org/10.1155/2017/1691465.