Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 1735268, 8 pages
https://doi.org/10.1155/2017/1735268
Research Article

Synergistic Sintering of Lignite Fly Ash and Steelmaking Residues towards Sustainable Compacted Ceramics

1Department of Environmental Engineering, Technological Education Institute of Western Macedonia, Kila, 50100 Kozani, Greece
2School of Chemical Engineering, National Technical University of Athens, Zografou Campus, 15773 Athens, Greece

Correspondence should be addressed to V. G. Karayannis; rg.mwiet@nayarakv

Received 10 April 2017; Accepted 1 June 2017; Published 4 July 2017

Academic Editor: Peter Majewski

Copyright © 2017 V. G. Karayannis et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Das, S. Prakash, P. S. R. Reddy, and V. N. Misra, “An overview of utilization of slag and sludge from steel industries,” Resources, Conservation and Recycling, vol. 50, no. 1, pp. 40–57, 2007. View at Publisher · View at Google Scholar · View at Scopus
  2. V. G. Karayannis and A. K. Moutsatsou, “Synthesis and characterization of nickel-alumina composites from recycled nickel powder,” Advances in Materials Science and Engineering, vol. 2012, Article ID 395612, 2012. View at Publisher · View at Google Scholar · View at Scopus
  3. I. B. Singh, K. Chaturvedi, R. K. Morchhale, and A. H. Yegneswaran, “Thermal treatment of toxic metals of industrial hazardous wastes with fly ash and clay,” Journal of Hazardous Materials, vol. 141, no. 1, pp. 215–222, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. M.-T. TANG, J. PENG, B. PENG, D. YU, and C.-B. TANG, “Thermal solidification of stainless steelmaking dust,” Transactions of Nonferrous Metals Society of China (English Edition), vol. 18, no. 1, pp. 202–206, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. T. Sofilić, A. Rastovčan-Mioč, Š. Cerjan-Stefanović, V. Novosel-Radović, and M. Jenko, “Characterization of steel mill electric-arc furnace dust,” Journal of Hazardous Materials, vol. 109, no. 1-3, pp. 59–70, 2004. View at Publisher · View at Google Scholar · View at Scopus
  6. A. T. Machado, F. R. Valenzuela-Diaz, C. A. C. de Souza, and L. R. P. de Andrade Lima, “Structural ceramics made with clay and steel dust pollutants,” Applied Clay Science, vol. 51, no. 4, pp. 503–506, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. P.-T. Teo, A. S. Anasyida, P. Basu, and M. S. Nurulakmal, “Recycling of Malaysia's electric arc furnace (EAF) slag waste into heavy-duty green ceramic tile,” Waste Management, vol. 34, no. 12, pp. 2697–2708, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. V. Mymrin, R. A. C. Ribeiro, K. Alekseev, E. Zelinskaya, N. Tolmacheva, and R. Catai, “Environment friendly ceramics from hazardous industrial wastes,” Ceramics International, vol. 40, no. 7, pp. 9427–9437, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. P. S. Polie, M. R. Ilic, and A. R. Popovic, “Environmental impact assessment of lignite fly ash and its utilization products as recycled hazardous wastes on surface and ground water quality,” Handbook of Environmental Chemistry, Vol. 5: Water Pollution, vol. 5, pp. 61–110, 2006. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Arsenovic, Z. Radojević, Ž. Jakšić, and L. Pezo, “Mathematical approach to application of industrial wastes in clay brick production - Part II: Optimization,” Ceramics International, vol. 41, no. 3, pp. 4899–4905, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. V. Karayannis, X. Spiliotis, A. Domopoulou, K. Ntampegliotis, and G. Papapolymerou, “Optimized synthesis of construction ceramic materials using high-Ca fly ash as admixture,” Romanian Journal of Materials, vol. 45, no. 4, pp. 358–363, 2015. View at Google Scholar
  12. V. G. Karayannis, A. K. Moutsatsou, and E. L. Katsika, “Synthesis of microwave-sintered ceramics from lignite fly and bottom ashes,” Journal of Ceramic Processing Research, vol. 14, no. 1, pp. 45–50, 2013. View at Google Scholar
  13. B. Kim and M. Prezzi, “Compaction characteristics and corrosivity of Indiana class-F fly and bottom ash mixtures,” Construction and Building Materials, vol. 22, no. 4, pp. 694–702, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Zimmer and C. P. Bergmann, “Fly ash of mineral coal as ceramic tiles raw material,” Waste Management, vol. 27, no. 1, pp. 59–68, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. S. Rai, D. H. Lataye, M. J. Chaddha et al., “An alternative to clay in building materials: Red mud sintering using fly ash via taguchi's methodology,” Advances in Materials Science and Engineering, vol. 2013, Article ID 757923, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Huang, M. Fang, Z. Huang et al., “Preparation, microstructure, and mechanical properties of spinel-corundum-sialon composite materials from waste fly ash and aluminum dross,” Advances in Materials Science and Engineering, vol. 2014, Article ID 789867, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. V. G. Karayannis, A. K. Moutsatsou, and E. L. Katsika, “Recycling of lignite highly-calcareous fly ash into nickel-based composites,” Fresenius Environmental Bulletin, vol. 21, no. 8B, pp. 2375–2380, 2012. View at Google Scholar
  18. A. Karamberi and A. Moutsatsou, “Vitrification of lignite fly ash and metal slags for the production of glass and glass ceramics,” China Particuology, vol. 4, no. 5, pp. 250–253, 2006. View at Google Scholar
  19. A. Olgun, Y. Erdogan, Y. Ayhan, and B. Zeybek, “Development of ceramic tiles from coal fly ash and tincal ore waste,” Ceramics International, vol. 31, no. 1, pp. 153–158, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. P. Porreca, E. Furlani, L. Fedrizzi et al., “Sintered ceramics from special waste incinerator ashes and steelmaking slag,” Industrial Ceramics, vol. 27, no. 3, pp. 197–203, 2007. View at Google Scholar
  21. L. F. Vilches, C. Fernández-Pereira, J. Olivares del Valle, and J. Vale, “Recycling potential of coal fly ash and titanium waste as new fireproof products,” Chemical Engineering Journal, vol. 95, no. 1, pp. 155–161, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. E. Bernardo, L. Esposito, E. Rambaldi, A. Tucci, Y. Pontikes, and G. N. Angelopoulos, “Sintered esseneite-wollastonite-plagioclase glass-ceramics from vitrified waste,” Journal of the European Ceramic Society, vol. 29, no. 14, pp. 2921–2927, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. G. Bantsis, C. Sikalidis, M. Betsiou, T. Yioultsis, and A. Bourliva, “Ceramic building materials for electromagnetic interference shielding using metallurgical slags,” Advances in Applied Ceramics, vol. 110, no. 4, pp. 233–237, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. L. S. Pioro and I. L. Pioro, “Reprocessing of metallurgical slag into materials for the building industry,” Waste Management, vol. 24, no. 4, pp. 371–379, 2004. View at Publisher · View at Google Scholar · View at Scopus
  25. P. Asokan, M. Saxena, and S. R. Asolekar, “Coal combustion residues—environmental implications and recycling potentials,” Resources, Conservation and Recycling, vol. 43, no. 3, pp. 239–262, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Ilic, C. Cheeseman, C. Sollars, and J. Knight, “Mineralogy and microstructure of sintered lignite coal fly ash,” Fuel, vol. 82, no. 3, pp. 331–336, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. V. Karayannis, A. Moutsatsou, N. Koukouzas, and C. Vasilatos, “Valorization of CFB-combustion fly ashes as the raw materials in the development of value-added ceramics,” Fresenius Environmental Bulletin, vol. 22, no. 12C, pp. 3873–3879, 2013. View at Google Scholar
  28. N. Koukouzas, C. Vasilatos, G. Itskos, I. Mitsis, and A. Moutsatsou, “Removal of heavy metals from wastewater using CFB-coal fly ash zeolitic materials,” Journal of Hazardous Materials, vol. 173, no. 1-3, pp. 581–588, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. R. Aiello, F. Testa, and G. Giordano, “Impact of zeolites and other porous materials on the new technologies at the beginning of the new millennium,” in Proceedings of the 2nd International FEZA Conference, Elsevier Science, Taormina, Italy, September, 2002.
  30. J. Kovac, A. Trnik, I. Medved, I. Stubna, and L. Vozar, “Influence of fly ash added to a ceramic body on its thermophysical properties,” Thermal Science, vol. 20, no. 2, pp. 603–612, 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. C. Sikalidis and M. Mitrakas, “Utilization of electric arc furnace dust as raw material for the production of ceramic and concrete building products,” Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering, vol. 41, no. 9, pp. 1943–1954, 2006. View at Publisher · View at Google Scholar · View at Scopus
  32. K. Pimraksa, M. Wilhelm, and W. Wruss, “A new approach to the production of bricks made of 100% fly ash,” Tile & brick International, vol. 16, no. 6, pp. 428–435, 2000. View at Google Scholar