Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 1893672, 8 pages
https://doi.org/10.1155/2017/1893672
Research Article

Effect of Nickel Content on the Corrosion Resistance of Iron-Nickel Alloys in Concentrated Hydrochloric Acid Pickling Solutions

1Center of Excellence for Research in Engineering Materials (CEREM), Advanced Manufacturing Institute (AMI), King Saud University, P.O. Box 800, Al-Riyadh 11421, Saudi Arabia
2Mechanical Engineering Department, King Saud University, P.O. Box 800, Al-Riyadh 11421, Saudi Arabia
3Electrochemistry and Corrosion Laboratory, Department of Physical Chemistry, National Research Centre, El-Behoth St. 33, Dokki, Cairo 12622, Egypt
4Mechanical Design and Materials Department, Faculty of Energy Engineering, Aswan University, Aswan 81521, Egypt

Correspondence should be addressed to El-Sayed M. Sherif; as.ude.usk@firehse

Received 23 March 2017; Revised 11 May 2017; Accepted 24 May 2017; Published 22 June 2017

Academic Editor: Simon C. Potter

Copyright © 2017 Nabeel Alharthi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Nabeel Alharthi, El-Sayed M. Sherif, Hany S. Abdo, and S. Zein El Abedin, “Effect of Nickel Content on the Corrosion Resistance of Iron-Nickel Alloys in Concentrated Hydrochloric Acid Pickling Solutions,” Advances in Materials Science and Engineering, vol. 2017, Article ID 1893672, 8 pages, 2017. https://doi.org/10.1155/2017/1893672.