Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 1932730, 18 pages
https://doi.org/10.1155/2017/1932730
Research Article

Analysis of the Seismic Performance of Site-Bolted Beam to Column Connections in Modularized Prefabricated Steel Structures

1Beijing Engineering Research Center of High-Rise and Large-Span Prestressed Steel Structures, Beijing University of Technology, Beijing 100124, China
2Beijing Key Laboratory of Earthquake Engineering and Structural Retrofit, Beijing University of Technology, Beijing 100124, China
3Beijing Advanced Innovation Centre for Future Urban Design, Beijing 100044, China

Correspondence should be addressed to Xuechun Liu

Received 10 March 2017; Revised 15 June 2017; Accepted 19 July 2017; Published 12 September 2017

Academic Editor: Michael Aizenshtein

Copyright © 2017 Xuechun Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. K. Miller, “Lessons learned from the Northridge earthquake,” Engineering Structures, vol. 20, no. 4-6, pp. 249–260, 1998. View at Publisher · View at Google Scholar · View at Scopus
  2. M. Nakashima, K. Inoue, and M. Tada, “Classification of damage to steel buildings observed in the 1995 Hyogoken-Nanbu earthquake,” Engineering Structures, vol. 20, no. 4-6, pp. 271–281, 1998. View at Publisher · View at Google Scholar · View at Scopus
  3. E. P. Popov, T.-S. Yang, and S.-P. Chang, “Design of steel MRF connections before and after 1994 Northridge earthquake,” Engineering Structures, vol. 20, no. 12, pp. 1030–1038, 1998. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Naimi, M. Celikag, and A. A. Hedayat, “Ductility enhancement of post-northridge connections by multilongitudinal voids in the beam web,” The Scientific World Journal, vol. 2013, Article ID 515936, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. Z. F. Li, Y. J. Shi, H. Chen, and Y. Q. Wang, “Nonlinear element analysis of improved beam-column joint of steel structure,” Building Structure, vol. 32, no. 9, pp. 015–018, 2002 (Chinese). View at Google Scholar
  6. D. W. Zhao, Y. J. Shi, and H. Chen, “Experimental study of beam-column joint under low cycling load,” Building Structure, vol. 30, no. 9, pp. 003–007, 2000 (Chinese). View at Google Scholar
  7. C.-C. Chen, C.-C. Lin, and C.-H. Lin, “Ductile moment connections used in steel column-tree moment-resisting frames,” Journal of Constructional Steel Research, vol. 62, no. 8, pp. 793–801, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. C.-C. Chen and C.-C. Lin, “Seismic performance of steel beam-to-column moment connections with tapered beam flanges,” Engineering Structures, vol. 48, pp. 588–601, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Astaneh-Asl, Seismic Design Steel Column-Tree Moment Resisting Frames, Structural Steel Educational Council, Berkeley, Calif, USA, 1997.
  10. J. Ribeiro, A. Santiago, C. Rigueiro, and L. S. Da Silva, “Analytical model for the response of T-stub joint component under impact loading,” Journal of Constructional Steel Research, vol. 106, pp. 23–34, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Ribeiro, A. Santiago, C. Rigueiro, P. Barata, and M. Veljkovic, “Numerical assessment of T-stub component subjected to impact loading,” Engineering Structures, vol. 106, pp. 450–460, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. J. W. Hu, R. T. Leon, and T. H. Park, “Mechanical modeling of bolted T-stub connections under cyclic loads part I: stiffness modeling,” Journal of Constructional Steel Research, vol. 67, no. 11, pp. 1710–1718, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. J. W. Hu, R. T. Leon, and T. Park, “Mechanical models for the analysis of bolted T-stub connections under cyclic loads,” Journal of Constructional Steel Research, vol. 78, pp. 45–57, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. A. K. Dessouki, A. H. Youssef, and M. M. Ibrahim, “Behavior of I-beam bolted extended end-plate moment connections,” Ain Shams Engineering Journal, vol. 4, no. 4, pp. 685–699, 2013. View at Publisher · View at Google Scholar · View at Scopus
  15. G. S. Prinz, A. Nussbaumer, L. Borges, and S. Khadka, “Experimental testing and simulation of bolted beam-column connections having thick extended endplates and multiple bolts per row,” Engineering Structures, vol. 59, pp. 434–447, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. Y. Shi, G. Shi, and Y. Wang, “Experimental and theoretical analysis of the moment-rotation behaviour of stiffened extended end-plate connections,” Journal of Constructional Steel Research, vol. 63, no. 9, pp. 1279–1293, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. K. D. Tsavdaridis and T. Papadopoulos, “A FE parametric study of RWS beam-to-column bolted connections with cellular beams,” Journal of Constructional Steel Research, vol. 116, pp. 92–113, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. R. Bai, S.-L. Chan, and J.-P. Hao, “Improved design of extended end-plate connection allowing for prying effects,” Journal of Constructional Steel Research, vol. 113, pp. 13–27, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. G.-Q. Li, L.-Z. Chen, J.-T. Li, and G.-B. Lou, “Modeling of end-plate bolted composite connection in fire considering axial force effects,” Journal of Constructional Steel Research, vol. 76, pp. 133–143, 2012. View at Publisher · View at Google Scholar · View at Scopus
  20. R. Rahnavard, N. Siahpolo, M. Naghavi, and A. Hassanipour, “Analytical study of common rigid steel connections under the effect of heat,” Advances in Civil Engineering, vol. 2014, Article ID 692323, 10 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. C. Fang, M. C. H. Yam, A. C. C. Lam, and L. Xie, “Cyclic performance of extended end-plate connections equipped with shape memory alloy bolts,” Journal of Constructional Steel Research, vol. 94, pp. 122–136, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Mirzaie Aliabadi, M. R. Bahaari, and S. Torabian, “Design and analytical evaluation of a new self-centering connection with bolted T-stub devices,” Advances in Materials Science and Engineering, vol. 2013, Article ID 163021, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. I. Faridmehr, Y. Ahmad, M. M. Tahir, and M. H. Osman, “Cyclic and explosive evaluation of new proposed steel joint,” Advances in Civil Engineering, vol. 2016, Article ID 4975097, 2016. View at Publisher · View at Google Scholar · View at Scopus
  24. X. C. Liu, A. X. Xu, A. L. Zhang, Z. Ni, H. X. Wang, and L. Wu, “Static and seismic experiment for welded joints in modularized prefabricated steel structure,” Journal of Constructional Steel Research, vol. 112, pp. 183–195, 2015. View at Publisher · View at Google Scholar · View at Scopus
  25. X. C. Liu, S. H. Pu, A. L. Zhang et al., “Static and seismic experiment for bolted-welded joint in modularized prefabricated steel structure,” Journal of Constructional Steel Research, vol. 115, pp. 417–433, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. X. C. Liu, S. H. Pu, A. X. Xu, Z. Ni, A. L. Zhang, and Z. W. Yang, “Experimental study on static and seismic performance of bolted joint in modularized multi-layer and high-rise prefabricated steel structures,” Journal of Building Structures, vol. 36, no. 12, pp. 43–51, 2015 (Chinese). View at Google Scholar
  27. X. C. Liu, Z. W. Yang, H. X. Wang, A. L. Zhang, S. H. Pu, and L. Wu, “Seismic performance study on beam-to-column joint of bolted assembled multi-high-level steel structure,” Journal of Building Structures, vol. 38, no. 3, pp. 43–51, 2017 (Chinese). View at Google Scholar
  28. X. Liu, Z. Yang, H. Wang et al., “Seismic performance of H-section beam to HSS column connection in prefabricated structures,” Journal of Constructional Steel Research, vol. 138, pp. 1–16, 2017. View at Publisher · View at Google Scholar
  29. X. C. Liu, S. H. Pu, and A. L. Zhang, “Performance analysis and design on bolted connections in modularized prefabricated steel structures,” Journal of Constructional Steel Research, vol. 19, no. 9, pp. 183–195, 2017. View at Google Scholar
  30. X. Liu, A. Zhang, J. Ma, Y. Tan, and Y. Bai, “Design and model test of a modularized prefabricated steel frame structure with inclined braces,” Advances in Materials Science and Engineering, vol. 2015, Article ID 291481, 12 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  31. F. X. Hu, G. Shi, Y. J. Shi et al., “Experimental study on seismic performance of specifically pre-fabricated beam-column connections,” Journal of Building Structures, vol. 35, no. 7, pp. 034–043, 2014 (Chinese). View at Google Scholar
  32. Q. J. Wang, Y. N. Zhang, C. Y. Xu et al., “Seismic test for fabricated connection of concrete-filled steel tubular column and H-shaped steel beam,” Journal of Shenyang University of Technology, vol. 36, no. 3, pp. 355–360, 2014 (Chinese). View at Google Scholar
  33. Y. S. Yu, L. Wei, and G. X. Fu, “Nonlinear static analysis of a new beam-column assembly rigid connection,” World Earthquake Engineering, vol. 30, no. 1, pp. 050–056, 2014 (Chinese). View at Google Scholar
  34. L. X. Jiang, Y. L. Guo, Q. T. Lu et al., “Behavior of a new type of self-locked joint of concrete-filled steel tubular column and steel beam,” Construction Technology, vol. 38, no. 3, pp. 067–069, 2009 (Chinese). View at Google Scholar
  35. A. Zhang, L. Zhao, X. Liu, and Y. Sun, “Monotonic experimental study of prefabricated square tubular column to truss beam connections,” China Civil Engineering Journal, vol. 47, pp. 169–174, 2014 (Chinese). View at Google Scholar · View at Scopus
  36. R. L. Ma, Y. Yang, Q. S. Chen et al., “Seismic performance testing study on high strength bolt connections with slotted holes,” Journal of Building Structures, vol. 30, no. 1, pp. 101–106, 2009 (Chinese). View at Google Scholar
  37. GB 50011, Code for Seismic Design of Buildings, China Planning Press, Beijing, China, 2010 (Chinese).
  38. JGJ 99, Technical Specification for Steel Structure of Tall Building, China Architecture & Building Press, Beijing, China, 2015 (Chinese).
  39. M. Gerami, H. Saberi, V. Saberi, and A. S. Daryan, “Cyclic behavior of bolted connections with different arrangement of bolts,” Journal of Constructional Steel Research, vol. 67, no. 4, pp. 690–705, 2011. View at Publisher · View at Google Scholar · View at Scopus
  40. GB/T 288. 1. Metallic Materials: Tensile Testing at Ambient Temperature, China Standards Press, Beijing, China, [In Chinese] 2010.
  41. GB50205, Code for Acceptance of Construction Quality of Steel Structures, China Planning Press, Beijing, China, 2001 (Chinese).
  42. ANSI/AISC341, Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, Ill, USA, 2010.
  43. A. L. Zhang, Q. X. Quan, X. X. Zhan, and X. F. Ma, “Force mechanism analysis of fabricated friction dissipation re-centering brace with zero initial cable force,” Journal of Southeast University (Natural Science Edition), vol. 47, no. 1, pp. 142–149, 2017. View at Google Scholar
  44. A. M. Girão Coelho, L. S. D. Silva, and F. S. K. Bijlaard, “Ductility analysis of bolted extended end plate beam-to-column connections in the framework of the component method,” Steel and Composite Structures, vol. 6, no. 1, pp. 33–53, 2006. View at Publisher · View at Google Scholar · View at Scopus
  45. Li. Lm, Z. H. Chen, and N. Li, “Experimental study on seismic capability of diaphragm-through style beam-column joint,” Earthquake Engineering and Engineering Vibration, vol. 27, no. 1, pp. 46–53, 2007 (Chinese). View at Google Scholar