Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 1950196, 6 pages
https://doi.org/10.1155/2017/1950196
Research Article

Effect of Heat Treatment on the Microstructure, Phase Distribution, and Mechanical Properties of AlCoCuFeMnNi High Entropy Alloy

Metallurgical and Materials Engineering, Muğla Sitki Kocman University, 48100 Muğla, Turkey

Correspondence should be addressed to Gulhan Cakmak; moc.liamg@kmkcnhlg

Received 16 May 2017; Accepted 13 July 2017; Published 27 August 2017

Academic Editor: Patrice Berthod

Copyright © 2017 Gulhan Cakmak. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J.-W. Yeh, S.-K. Chen, S.-J. Lin et al., “Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes,” Advanced Engineering Materials, vol. 6, no. 5, pp. 299–303, 2004. View at Publisher · View at Google Scholar
  2. B. Cantor, “Multicomponent and high entropy alloys,” Entropy, vol. 16, no. 9, pp. 4749–4768, 2014. View at Publisher · View at Google Scholar · View at Scopus
  3. X. F. Wang, Y. Zhang, Y. Qiao, and G. L. Chen, “Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys,” Intermetallics, vol. 15, no. 3, pp. 357–362, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. J.-W. Yeh, S.-J. Lin, T.-S. Chin et al., “Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements,” Metallurgical and Materials Transactions A, vol. 35, no. 8, pp. 2533–2536, 2004. View at Publisher · View at Google Scholar
  5. C.-W. Tsai, M.-H. Tsai, J.-W. Yeh, and C.-C. Yang, “Effect of temperature on mechanical properties of Al0.5CoCrCuFeNi wrought alloy,” Journal of Alloys and Compounds, vol. 490, no. 1-2, pp. 160–165, 2010. View at Publisher · View at Google Scholar
  6. S. Varalakshmi, M. Kamaraj, and B. S. Murty, “Processing and properties of nanocrystalline CuNiCoZnAlTi high entropy alloys by mechanical alloying,” Materials Science and Engineering A, vol. 527, no. 4-5, pp. 1027–1030, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. C.-J. Tong, M.-R. Chen, J.-W. Yeh et al., “Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements,” Metallurgical and Materials Transactions A, vol. 36, no. 5, pp. 1263–1271, 2005. View at Publisher · View at Google Scholar
  8. Y. J. Zhou, Y. Zhang, Y. L. Wang, and G. L. Chen, “Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties,” Applied Physics Letters, vol. 90, no. 18, p. 181904, 2007. View at Publisher · View at Google Scholar
  9. W.-R. Wang, W.-L. Wang, S.-C. Wang, Y.-C. Tsai, C.-H. Lai, and J.-W. Yeh, “Effects of Al addition on the microstructure and mechanical property of Al xCoCrFeNi high-entropy alloys,” Intermetallics, vol. 26, pp. 44–51, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Ye, M. Ma, W. Liu et al., “Synthesis and Characterization of High-Entropy Alloy AlxFeCoNiCuCr by Laser Cladding,” Advances in Materials Science and Engineering, vol. 2011, Article ID 485942, 7 pages, 2011. View at Publisher · View at Google Scholar
  11. P.-K. Hung, J.-W. Yeh, T.-T. Shun, and S.-K. Chen, “Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating,” Advanced Engineering Materials, vol. 6, no. 1-2, pp. 74–78, 2004. View at Publisher · View at Google Scholar
  12. C.-Y. Hsu, C.-C. Juan, W.-R. Wang, T.-S. Sheu, J.-W. Yeh, and S.-K. Chen, “On the superior hot hardness and softening resistance of AlCoCrxFeMo0.5Ni high-entropy alloys,” Materials Science and Engineering A, vol. 528, no. 10-11, pp. 3581–3588, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. D. B. Miracle, J. D. Miller, O. N. Senkov, C. Woodward, M. D. Uchic, and J. Tiley, “Exploration and development of high entropy alloys for structural applications,” Entropy, vol. 16, no. 1, pp. 494–525, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. H.-P. Chou, Y.-S. Chang, S.-K. Chen, and J.-W. Yeh, “Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤x≤2) high-entropy alloys,” Materials Science and Engineering: B, vol. 163, no. 3, pp. 184–189, 2009. View at Publisher · View at Google Scholar
  15. Y. P. Wang, B. S. Li, M. X. Ren, C. Yang, and H. Z. Fu, “Microstructure and compressive properties of AlCrFeCoNi high entropy alloy,” Materials Science and Engineering: A, vol. 491, no. 1-2, pp. 154–158, 2008. View at Publisher · View at Google Scholar
  16. L. Lutterotti, S. Matthies, and H. R. Wenk, Int Union Crystallogr Comm Powder Diffr Newslett 1999, 21, p. 14 MAUD Version 2.072, 2008 http://maud.radiographema.eu/.
  17. T. Borkar, B. Gwalani, D. Choudhuri et al., “A combinatorial assessment of AlxCrCuFeNi2 (0 < x < 1.5) complex concentrated alloys: Microstructure, microhardness, and magnetic properties,” Acta Materialia, vol. 116, pp. 63–76, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. J.-M. Wua, S.-J. Lin, J.-W. Yeh, S.-K. Chen, Y.-S. Huang, and H.-C. Chen, “Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content,” Wear, vol. 261, no. 5-6, pp. 513–519, 2006. View at Publisher · View at Google Scholar
  19. M.-H. Tsai and J.-W. Yeh, “High-entropy alloys: a critical review,” Materials Research Letters, vol. 2, no. 3, pp. 107–123, 2014. View at Publisher · View at Google Scholar