Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 2095137, 12 pages
https://doi.org/10.1155/2017/2095137
Research Article

Design and Analysis of Fused Deposition Modeling 3D Printer Nozzle for Color Mixing

1College of Transportation, Shandong University of Science and Technology, Qingdao 266590, China
2College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266590, China

Correspondence should be addressed to Qingliang Zeng; moc.361@gnezlq

Received 24 May 2017; Revised 22 June 2017; Accepted 2 July 2017; Published 13 August 2017

Academic Editor: Gianluca Percoco

Copyright © 2017 Shanling Han et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Shanling Han, Yu Xiao, Tao Qi, Zhiyong Li, and Qingliang Zeng, “Design and Analysis of Fused Deposition Modeling 3D Printer Nozzle for Color Mixing,” Advances in Materials Science and Engineering, vol. 2017, Article ID 2095137, 12 pages, 2017. doi:10.1155/2017/2095137