Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 2095137, 12 pages
https://doi.org/10.1155/2017/2095137
Research Article

Design and Analysis of Fused Deposition Modeling 3D Printer Nozzle for Color Mixing

1College of Transportation, Shandong University of Science and Technology, Qingdao 266590, China
2College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao 266590, China

Correspondence should be addressed to Qingliang Zeng; moc.361@gnezlq

Received 24 May 2017; Revised 22 June 2017; Accepted 2 July 2017; Published 13 August 2017

Academic Editor: Gianluca Percoco

Copyright © 2017 Shanling Han et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Garland and G. Fadel, “Design and manufacturing functionally gradient material objects with an off the shelf three-dimensional printer: challenges and solutions,” Journal of Mechanical Design, vol. 137, no. 11, 11 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. P. J. Goodrich, F. Sharifi, and N. Hashemi, “Rapid prototyping of microchannels with surface patterns for fabrication of polymer fibers,” RSC Advances, vol. 5, no. 87, pp. 71203–71209, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. Z. H. Yu, H. M. Wang, and G. X. Chen, “Effects of nozzle distance on micro quality in 3D printing,” Applied Mechanics and Materials, vol. 644-650, pp. 4900–4904, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Hergel and S. Lefebvre, “Clean color: improving multi-filament 3D prints,” Computer Graphics Forum, vol. 33, no. 2, pp. 469–478, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. L. Galantucci, I. Bodi, J. Kacani, and F. Lavecchia, “Analysis of dimensional performance for a 3D open-source printer based on fused deposition modeling technique,” Procedia CIRP, vol. 28, pp. 82–87, 2015. View at Publisher · View at Google Scholar
  6. L. Ciocca, C. Marchetti, S. Mazzoni et al., “Accuracy of fibular sectioning and insertion into a rapid-prototyped bone plate, for mandibular reconstruction using CAD-CAM technology,” Journal of Cranio-Maxillofacial Surgery, vol. 43, no. 1, pp. 28–33, 2015. View at Publisher · View at Google Scholar
  7. K. Namba, A. Higaki, N. Kaneko, T. Mashiko, S. Nemoto, and E. Watanabe, “Microcatheter shaping for intracranial aneurysm coiling using the 3-dimensional printing rapid prototyping technology: preliminary result in the first 10 consecutive cases,” World Neurosurgery, vol. 84, no. 1, pp. 178–186, 2015. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Domanski, K. Skalski, R. Grygoruk, and A. Mróz, “Rapid prototyping in the intervertebral implant design process,” Rapid Prototyping Journal, vol. 21, no. 6, pp. 735–746, 2015. View at Publisher · View at Google Scholar · View at Scopus
  9. E. A. Nasr, A. M. Al-Ahmari, H. Alkhawashki, A. Altamimi, and M. Alkhuraisi, “Developing a methodology for analysis and manufacturing of proximal interphalangeal (PIP) joint using rapid prototyping technique,” Rapid Prototyping Journal, vol. 21, no. 4, pp. 449–460, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. A. D. Lantada, V. Piotter, K. Plewa, N. Barié, M. Guttmann, and M. Wissmann, “Toward mass production of microtextured microdevices: linking rapid prototyping with microinjection molding,” International Journal of Advanced Manufacturing Technology, vol. 76, no. 5-8, pp. 1011–1020, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. A. Klodowski, H. Eskelinen, and S. Semken, “Leakage-proof nozzle design for RepRap community 3D printer,” Robotica, vol. 33, no. 4, pp. 721–746, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. R. Pastirčák, A. Sládek, and E. Kucharčíková, “The production of plaster molds with patternless process technology,” Archives of Foundry Engineering, vol. 15, no. 2, pp. 91–94, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Zhang, A. Vora, W. Han et al., “Dual-responsive hydrogels for direct-write 3D printing,” Macromolecules, vol. 48, no. 18, pp. 6482–6488, 2015. View at Publisher · View at Google Scholar · View at Scopus
  14. T. Reiner, N. Carr, R. Měch, O. Št'Ava, C. Dachsbacher, and G. Miller, “Dual-color mixing for fused deposition modeling printers,” Computer Graphics Forum, vol. 33, no. 2, pp. 479–486, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. C. A. Arikan, A. Brunton, T. M. Tanksale, and P. Urban, “Color-managed 3D-printing with highly translucent printing materials,” in Measuring, Modeling, and Reproducing Material Appearance 2015, 2015. View at Google Scholar
  16. S. Khalil, J. Nam, and W. Sun, “Multi-nozzle deposition for construction of 3D biopolymer tissue scaffolds,” Rapid Prototyping Journal, vol. 11, no. 1, pp. 9–17, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. Z. Weng, J. Wang, T. Senthil, and L. Wu, “Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing,” Materials & Design, vol. 102, pp. 276–283, 2016. View at Publisher · View at Google Scholar
  18. F. Lederle, F. Meyer, G. Brunotte, C. Kaldun, and E. G. Hübner, “Improved mechanical properties of 3D-printed parts by fused deposition modeling processed under the exclusion of oxygen,” Progress in Additive Manufacturing, vol. 1, no. 1-2, pp. 3–7, 2016. View at Publisher · View at Google Scholar
  19. A. Kantaros, N. Chatzidai, and D. Karalekas, “3D printing-assisted design of scaffold structures,” International Journal of Advanced Manufacturing Technology, vol. 82, no. 1-4, pp. 559–571, 2016. View at Publisher · View at Google Scholar · View at Scopus
  20. K. T. Lee, E.-S. Kim, W.-S. Chu, and S.-H. Ahn, “Design and 3D printing of controllable-pitch archimedean screw for pico-hydropower generation,” Journal of Mechanical Science and Technology, vol. 29, no. 11, pp. 4851–4857, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. V. Ken, “3D printers: judgment day,” Industrial Laser Solutions, vol. 28, no. 2, pp. 12–15, 2013. View at Google Scholar
  22. F. Acuna, D. Rivas, S. Chancusi, and P. Navarrete, “Design and construction of a 3D printer auto controller wirelessly through of free software,” IEEE Latin America Transactions, vol. 13, no. 6, pp. 1893–1898, 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. X. Song, Y. Pan, and Y. Chen, “Development of a low-cost parallel kinematic machine for multidirectional additive manufacturing,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 137, no. 2, Article ID 021005, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. M. Dawoud, I. Taha, and S. J. Ebeid, “Mechanical behaviour of ABS: an experimental study using FDM and injection moulding techniques,” Journal of Manufacturing Processes, vol. 21, pp. 39–45, 2016. View at Publisher · View at Google Scholar · View at Scopus
  25. P. Dudek, “FDM 3D printing technology in manufacturing composite elements,” Archives of Metallurgy and Materials, vol. 58, no. 4, pp. 1415–1418, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. K. Kun, “Reconstruction and development of a 3D printer using FDM technology,” Procedia Engineering, vol. 149, pp. 203–211, 2016. View at Google Scholar
  27. R. Singh, S. Singh, and K. Mankotia, “Development of ABS based wire as feedstock filament of FDM for industrial applications,” Rapid Prototyping Journal, vol. 22, no. 2, pp. 300–310, 2016. View at Publisher · View at Google Scholar
  28. K. Szykiedans and W. Credo, “Mechanical properties of FDM and SLA low-cost 3-D prints,” Procedia Engineering, vol. 136, pp. 257–262, 2016. View at Publisher · View at Google Scholar