Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 2316347, 13 pages
https://doi.org/10.1155/2017/2316347
Research Article

Mechanical Properties of Fiber-Reinforced Concrete Using Composite Binders

Far Eastern Federal University, Vladivostok 690950, Russia

Correspondence should be addressed to Roman Fediuk

Received 14 June 2017; Revised 12 September 2017; Accepted 19 September 2017; Published 26 October 2017

Academic Editor: Rishi Gupta

Copyright © 2017 Roman Fediuk et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Chithra, S. R. R. Senthil Kumar, and K. Chinnaraju, “The effect of Colloidal Nano-silica on workability, mechanical and durability properties of High Performance Concrete with Copper slag as partial fine aggregate,” Construction and Building Materials, vol. 113, pp. 794–804, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. K. S. Al-Jabri, M. Hisada, S. K. Al-Oraimi, and A. H. Al-Saidy, “Copper slag as sand replacement for high performance concrete,” Cement and Concrete Composites, vol. 31, no. 7, pp. 483–488, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. W. Wu, W. Zhang, and G. Ma, “Optimum content of copper slag as a fine aggregate in high strength concrete,” Materials and Corrosion, vol. 31, no. 6, pp. 2878–2883, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. H. Stang and C. Pedersen, “HPFRCC - extruded pipes,” in Proceedings of the 1996 4th Materials Engineering Conference. Part 1 (of 2), pp. 261–270, November 1996. View at Scopus
  5. P. Tjiptobroto and W. Hansen, “Tensile strain hardening and multiple cracking in high-performance cement-based composites containing discontinuous fibers,” ACI Materials Journal, vol. 90, no. 1, pp. 16–25, 1993. View at Google Scholar · View at Scopus
  6. V. C. Li, “From mechanics to structural engineering: the design of cementitious composites for civil engineering applications,” Structural Engineering/Earthquake Engineering, vol. 10, pp. 37–48, 1993. View at Google Scholar
  7. M. Li and V. C. Li, “Rheology, fiber dispersion, and robust properties of engineered cementitious composites,” Materials and Structures/Materiaux et Constructions, vol. 46, no. 3, pp. 405–420, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Qiu and E.-H. Yang, “Micromechanics-based investigation of fatigue deterioration of engineered cementitious composite (ECC),” Cement and Concrete Research, vol. 95, pp. 65–74, 2017. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Luo, Y. Wu, A. Zhao et al., “Hydrothermally synthesized porous materials from municipal solid waste incineration bottom ash and their interfacial interactions with chloroaromatic compounds,” Journal of Cleaner Production, vol. 162, pp. 411–419, 2017. View at Publisher · View at Google Scholar
  10. D.-Y. Yoo and N. Banthia, “Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review,” Cement and Concrete Composites, vol. 73, pp. 267–280, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. D.-Y. Yoo, N. Banthia, and Y.-S. Yoon, “Predicting service deflection of ultra-high-performance fiber-reinforced concrete beams reinforced with GFRP bars,” Composites Part B: Engineering, vol. 99, pp. 381–397, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. J. Yang, H. Shin, and D. Yoo, “Benefits of using amorphous metallic fibers in concrete pavement for long-term performance,” Archives of Civil and Mechanical Engineering, vol. 17, no. 4, pp. 750–760, 2017. View at Publisher · View at Google Scholar
  13. D. Yoo, I. You, and S. Lee, “Electrical properties of cement-based composites with carbon nanotubes, graphene, and graphite nanofibers,” Sensors, vol. 17, no. 5, p. 1064, 2017. View at Publisher · View at Google Scholar
  14. M. Castellote, I. Llorente, C. Andrade, and C. Alonso, “Accelerated leaching of ultra high performance concretes by application of electrical fields to simulate their natural degradation,” Materiaux et Constructions, vol. 36, no. 256, pp. 81–90, 2003. View at Publisher · View at Google Scholar · View at Scopus
  15. M. Tabatabaeian, A. Khaloo, A. Joshaghani, and E. Hajibandeh, “Experimental investigation on effects of hybrid fibers on rheological, mechanical, and durability properties of high-strength SCC,” Construction and Building Materials, vol. 147, pp. 497–509, 2017. View at Publisher · View at Google Scholar
  16. M. Sahmaran and I. O. Yaman, “Hybrid fiber reinforced self-compacting concrete with a high-volume coarse fly ash,” Construction and Building Materials, vol. 21, no. 1, pp. 150–156, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. R. S. Fediuk, “Mechanical Activation of Construction Binder Materials by Various Mills,” in Proceedings of the All-Russia Scientific and Practical Conference on Materials Treatment: Current Problems and Solutions, vol. 125, November 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. R. Fediuk and A. Yushin, “Composite binders for concrete with reduced permeability,” in Proceedings of the International Conference on Advanced Materials and New Technologies in Modern Materials Science 2015, AMNT 2015, November 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. R. S. Fediuk and A. M. Yushin, “The use of fly ash the thermal power plants in the construction,” in Proceedings of the 21st International Conference for Students and Young Scientists: Modern Technique and Technologies, MTT 2015, vol. 93, October 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. M. Sánchez, M. C. Alonso, and R. González, “Preliminary attempt of hardened mortar sealing by colloidal nanosilica migration,” Construction and Building Materials, vol. 66, pp. 306–312, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. M. H. Mobini, A. Khaloo, P. Hosseini, and A. Esrafili, “Mechanical properties of fiber-reinforced high-performance concrete incorporating pyrogenic nanosilica with different surface areas,” Construction and Building Materials, vol. 101, pp. 130–140, 2015. View at Publisher · View at Google Scholar · View at Scopus
  22. N. Ranjbar, A. Behnia, B. Alsubari, P. Moradi Birgani, and M. Z. Jumaat, “Durability and mechanical properties of self-compacting concrete incorporating palm oil fuel ash,” Journal of Cleaner Production, vol. 112, pp. 723–730, 2016. View at Publisher · View at Google Scholar · View at Scopus
  23. A. Hendi, H. Rahmani, D. Mostofinejad, A. Tavakolinia, and M. Khosravi, “Simultaneous effects of microsilica and nanosilica on self-consolidating concrete in a sulfuric acid medium,” Construction and Building Materials, vol. 152, pp. 192–205, 2017. View at Publisher · View at Google Scholar
  24. L. Xu, F. Deng, and Y. Chi, “Nano-mechanical behavior of the interfacial transition zone between steel-polypropylene fiber and cement paste,” Construction and Building Materials, vol. 145, pp. 619–638, 2017. View at Publisher · View at Google Scholar
  25. R. Fediuk, “High-strength fibrous concrete of Russian Far East natural materials,” in Proceedings of the International Conference on Advanced Materials and New Technologies in Modern Materials Science 2015, AMNT 2015, vol. 116, November 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. R. Ibragimov, “The influence of binder modification by means of the superplasticizer and mechanical activation on the mechanical properties of the high-density concrete,” ZKG International, vol. 69, no. 6, pp. 34–39, 2016. View at Google Scholar · View at Scopus
  27. L. H. Zagorodnjuk, V. S. Lesovik, A. A. Volodchenko, and V. T. Yerofeyev, “Optimization of mixing process for heat-insulating mixtures in a spiral blade mixer,” International Journal of Pharmacy and Technology, vol. 8, no. 3, pp. 15146–15155, 2016. View at Google Scholar · View at Scopus
  28. R. A. Ibragimov and S. I. Pimenov, “Influence of mechanochemical activation on the cement hydration features,” Magazine of Civil Engineering, vol. 62, no. 2, pp. 3–12, 2016. View at Publisher · View at Google Scholar · View at Scopus
  29. E. Glagolev, L. Suleimanova, and V. Lesovik, “High reaction activity of nano-size phase of silica composite binder,” Journal of Environmental and Science Education, vol. 11, no. 18, pp. 12383–12389, 2016. View at Google Scholar · View at Scopus
  30. S. L. Buyantuyev, L. A. Urkhanova, S. A. Lkhasaranov, Y. Y. Stebenkova, A. B. Khmelev, and A. S. Kondratenko, “The methods of receiving coal water suspension and its use as the modifying additive in concrete,” in Proceedings of the 12th International Conference Radiation-Thermal Effects and Processes in Inorganic Materials, vol. 168, September 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. S. L. Buyantuev, L. A. Urkhanova, A. S. Kondratenko, S. Y. Shishulkin, S. A. Lkhasaranov, and A. B. Khmelev, “Processing of ash and slag waste of heating plants by arc plasma to produce construction materials and nanomodifiers,” in Proceedings of the 12th International Conference Radiation-Thermal Effects and Processes in Inorganic Materials, vol. 168, September 2016. View at Publisher · View at Google Scholar · View at Scopus
  32. A. P. Semenov, N. N. Smirnyagina, L. A. Urkhanova et al., “Reception carbon nanomodifiers in arc discharge plasma and their application for modifying of building materials,” in Proceedings of the 12th International Conference Radiation-Thermal Effects and Processes in Inorganic Materials, vol. 168, September 2016. View at Publisher · View at Google Scholar · View at Scopus
  33. R. Chihaoui, H. Khelafi, Y. Senhadji, and M. Mouli, “Potential use of natural perlite powder as a pozzolanic mineral admixture in Portland cement,” Journal of Adhesion Science and Technology, vol. 30, no. 17, pp. 1930–1944, 2016. View at Publisher · View at Google Scholar · View at Scopus
  34. M. Koniorczyk, D. Gawin, and B. . Schrefler, “Modeling evolution of frost damage in fully saturated porous materials exposed to variable hygro-thermal conditions,” Computer Methods Applied Mechanics and Engineering, vol. 297, pp. 38–61, 2015. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  35. K. Marcin, “Coupled heat and water transport in deformable porous materials considering phase change kinetics,” International Journal of Heat and Mass Transfer, vol. 81, pp. 260–271, 2015. View at Publisher · View at Google Scholar · View at Scopus
  36. A. Peschard, A. Govin, P. Grosseau, B. Guilhot, and R. Guyonnet, “Effect of polysaccharides on the hydration of cement paste at early ages,” Cement and Concrete Research, vol. 34, no. 11, pp. 2153–2158, 2004. View at Publisher · View at Google Scholar · View at Scopus
  37. R. S. Fediuk and D. A. Khramov, “Research on porosity of the cement stone of composite binders,” Int. Res. J, vol. 1, pp. 77–79, 2016. View at Google Scholar
  38. Z. Liu, Y. Zhang, and Q. Jiang, “Continuous tracking of the relationship between resistivity and pore structure of cement pastes,” Construction and Building Materials, vol. 53, pp. 26–31, 2014. View at Publisher · View at Google Scholar · View at Scopus
  39. Z. Liu, Y. Zhang, G. Sun, Q. Jiang, and W. Zhang, “Resistivity method for monitoring the early age pore structure evolution of cement paste,” Journal of Civil, Architectural and Environmental Engineering, vol. 34, no. 5, pp. 148–153, 2012. View at Publisher · View at Google Scholar · View at Scopus
  40. M. Schmidt, H. Pöllmann, A. Egersdörfer, J. Göske, and S. Winter, “Investigations on the puzzolanic reactivity of a special glass meal in a cementitious system,” in Proceedings of the 32nd International Conference on Cement Microscopy 2010, pp. 86–118, 2010. View at Scopus
  41. M. Schmidt, H. Pöllmann, A. Egersdörfer, J. Göske, and S. Winter, “Investigations on the use of a foam glass containing metakaolin in a lime binder system,” in Proceedings of the 33rd International Conference on Cement Microscopy 2011, pp. 319–354, 2011. View at Scopus
  42. A. Sachdeva, M. J. Mccarthy, L. J. Csetenyi, and M. R. Jones, “Mechanisms of sulfate heave prevention in lime stabilized clays through pozzolanic additions,” in Proceedings of the International Symposium on Ground Improvement Technologies and Case Histories, ISGI'09, pp. 555–560, December 2009. View at Publisher · View at Google Scholar · View at Scopus
  43. A. J. Puppala, E. Wattanasanticharoen, V. S. Dronamraju, and L. R. Hoyos, Ettringite induced heaving and shrinking in kaolinite clay, vol. 162 of Geotechnical Special Publication, 2007. View at Publisher · View at Google Scholar · View at Scopus
  44. S. Liu and P. Yan, “Hydration properties of limestone powder in complex binding material,” Journal of the Chinese Ceramic Society, vol. 36, no. 10, pp. 1401–1405, 2008. View at Google Scholar · View at Scopus
  45. S. Liu and L. Zeng, “Influence of new admixtures on the properties of hydraulic concrete,” Journal of Hydroelectric Engineering, vol. 30, no. 2, pp. 118–122, 2011. View at Google Scholar · View at Scopus
  46. K. Pushkarova, K. Kaverin, and D. Kalantaevskiy, “Research of high-strength cement compositions modified by complex organic-silica additives,” EasternEuropean Journal of Enterprise Technologies, vol. 5, no. 5, pp. 42–51, 2015. View at Publisher · View at Google Scholar · View at Scopus
  47. E. V. Fomina, V. V. Strokova, and N. I. Kozhukhova, “Application of natural aluminosilicates in autoclave cellular concrete,” World Applied Sciences Journal, vol. 25, no. 1, pp. 48–54, 2013. View at Publisher · View at Google Scholar · View at Scopus
  48. K. Ma, J. Feng, G. Long, and Y. Xie, “Effects of mineral admixtures on shear thickening of cement paste,” Construction and Building Materials, vol. 126, pp. 609–616, 2016. View at Publisher · View at Google Scholar · View at Scopus
  49. P. Shafigh, M. A. Nomeli, U. J. Alengaram, H. B. Mahmud, and M. Z. Jumaat, “Engineering properties of lightweight aggregate concrete containing limestone powder and high volume fly ash,” Journal of Cleaner Production, vol. 135, pp. 148–157, 2016. View at Publisher · View at Google Scholar · View at Scopus
  50. A. Balza, O. Corona, A. Alarcón, J. Echevarrieta, M. Goite, and G. González, “Microstructural study of Portland cement additivated with Nanomaterials,” Acta Microscopica, vol. 25, no. 1, pp. 39–47, 2016. View at Google Scholar · View at Scopus
  51. F. Faleschini, M. A. Zanini, K. Brunelli, and C. Pellegrino, “Valorization of co-combustion fly ash in concrete production,” Materials and Corrosion, vol. 85, pp. 687–694, 2015. View at Publisher · View at Google Scholar · View at Scopus
  52. B. Boulekbache, M. Hamrat, M. Chemrouk, and S. Amziane, “Flexural behaviour of steel fibre-reinforced concrete under cyclic loading,” Construction and Building Materials, vol. 126, pp. 253–262, 2016. View at Publisher · View at Google Scholar · View at Scopus
  53. M. Rudzki, M. Bugdol, and T. Ponikiewski, “An image processing approach to determination of steel fibers orientation in reinforced concrete,” Lecture Notes in Computer Science, vol. 7339, pp. 143–150, 2012. View at Publisher · View at Google Scholar · View at Scopus
  54. T. Ponikiewski, J. Gołaszewski, M. Rudzki, and M. Bugdol, “Determination of steel fibres distribution in self-compacting concrete beams using X-ray computed tomography,” Archives of Civil and Mechanical Engineering, vol. 15, no. 2, pp. 558–568, 2015. View at Publisher · View at Google Scholar · View at Scopus
  55. R. S. Fediuk and D. A. Khramov, “Physical equipment spectroscopic study of coal ash,” Modern Construction and Architecture, vol. 1, pp. 57–60, 2016. View at Google Scholar
  56. R. S. Fediuk, A. K. Smoliakov, R. A. Timokhin, N. Y. Stoyushko, and N. A. Gladkova, Fibrous Concrete with Reduced Permeability to Protect the Home Against the Fumes of Expanded Polystyrene, vol. 66 of Materials Science and Engineering, 2017.
  57. M. Quintard, “Transfers in porous media,” Special Topics and Reviews in Porous Media, vol. 6, no. 2, pp. 91–108, 2015. View at Publisher · View at Google Scholar · View at Scopus