Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 2416821, 12 pages
https://doi.org/10.1155/2017/2416821
Research Article

Investigation of the Scanning Microarc Oxidation Process

1School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China
2Mechanical Engineering Department, Marquette University, 1515 West Wisconsin Avenue, Milwaukee, WI 53201 1881, USA

Correspondence should be addressed to Jianmin Han; nc.ude.utjb@nahmj

Received 24 January 2017; Revised 21 May 2017; Accepted 28 May 2017; Published 20 June 2017

Academic Editor: Ming-Xing Zhang

Copyright © 2017 Lingqin Xia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Wernick, R. Pinner, and P. G. Sheasby, The surface treatment and finishing of aluminium and its alloys, ASM International, Teddington, London, UK, 5th edition, 1987.
  2. V. F. Henley, Anodic oxidation of aluminium and its alloys, Pergamon Press, Oxford, 1st edition, 1982.
  3. Y. Cheng, J. Cao, Z. Peng et al., “Wear-resistant coatings formed on Zircaloy-2 by plasma electrolytic oxidation in sodium aluminate electrolytes,” Electrochimica Acta, vol. 116, pp. 453–466, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. E. Matykina, R. Arrabal, D. J. Scurr, A. Baron, P. Skeldon, and G. E. Thompson, “Investigation of the mechanism of plasma electrolytic oxidation of aluminium using 18O tracer,” Corrosion Science, vol. 52, no. 3, pp. 1070–1076, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Xu, Z. Yao, F. Jia, Y. Wang, Z. Jiang, and H. Bu, “Preparation of PEO ceramic coating on Ti alloy and its high temperature oxidation resistance,” Current Applied Physics, vol. 10, no. 2, pp. 698–702, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. J. A. Curran and T. W. Clyne, “Thermo-physical properties of plasma electrolytic oxide coatings on aluminium,” Surface and Coatings Technology, vol. 199, no. 2-3, pp. 168–176, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Zhong, L. Shi, M. Li, F. He, and X. He, “Characterization and thermal shock behavior of composite ceramic coating doped with ZrO2 particles on TC4 by micro-arc oxidation,” Applied Surface Science, vol. 311, pp. 158–163, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. H. Wu, X. Zhang, Z. Geng et al., “Preparation, antibacterial effects and corrosion resistant of porous Cu-TiO2 coatings,” Applied Surface Science, vol. 308, pp. 43–49, 2014. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Fazel, H. R. Salimijazi, M. A. Golozar, and M. R. Garsivaz Jazi, “A comparison of corrosion, tribocorrosion and electrochemical impedance properties of pure Ti and Ti6Al4V alloy treated by micro-arc oxidation process,” Applied Surface Science, vol. 324, pp. 751–756, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. S. L. Aktuğ, S. Durdu, I. Kutbay, and M. Usta, “Effect of Na2SiO3·5H2O concentration on microstructure and mechanical properties of plasma electrolytic oxide coatings on AZ31 Mg alloy produced by twin roll casting,” Ceram Int, vol. 42, pp. 1246–1253, 2016. View at Google Scholar
  11. S.-C. Yeh, D.-S. Tsai, J.-M. Wang, and C.-C. Chou, “Coloration of the aluminum alloy surface with dye emulsions while growing a plasma electrolytic oxide layer,” Surface and Coatings Technology, vol. 287, pp. 61–66, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. L. O. Snizhko, A. L. Yerokhin, A. Pilkington et al., “Anodic processes in plasma electrolytic oxidation of aluminium in alkaline solutions,” Electrochimica Acta, vol. 49, no. 13, pp. 2085–2095, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. L. Xia, J. Han, S. Yang, Z. Yang, and W. Li, “Growth process of scanning microarc oxidation coatings on a356 alloy and their corrosion resistance,” Chinese Journal of Materials Research, vol. 30, pp. 814–920, 2016 (Chinese). View at Google Scholar
  14. V. N. Khromov, J. A. Kuznetsov, and A. N. Novikov, Russian Patent, RU2163272, 1999.
  15. A. D. Pogrebnjak and Y. N. Tyurin, “The structure and properties of Al2O3 and Al coatings deposited by microarc oxidation on graphite substrates,” Technical Physics, vol. 49, no. 8, pp. 1064–1067, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. L. Wen, Y. Wang, Y. Jin, B. Liu, Y. Zhou, and D. Sun, “Microarc oxidation of 2024 Al alloy using spraying polar and its influence on microstructure and corrosion behavior,” Surface and Coatings Technology, vol. 228, pp. 92–99, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Martin, A. Melhem, I. Shchedrina et al., “Effects of electrical parameters on plasma electrolytic oxidation of aluminium,” Surface and Coatings Technology, vol. 221, pp. 70–76, 2013. View at Publisher · View at Google Scholar · View at Scopus
  18. I. Prasertsung, R. Mongkolnavin, S. Damrongsakkul, and C. S. Wong, “Surface modification of dehydrothermal crosslinked gelatin film using a 50 Hz oxygen glow discharge,” Surface and Coatings Technology, vol. 205, supplement 1, pp. S133–S138, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. D. D. DiBitonto, P. T. Eubank, M. R. Patel, and M. A. Barrufet, “Theoretical models of the electrical discharge machining process. I. A simple cathode erosion model,” Journal of Applied Physics, vol. 66, no. 9, pp. 4095–4103, 1989. View at Publisher · View at Google Scholar · View at Scopus
  20. M. R. Patel, M. A. Barrufet, P. T. Eubank, and D. D. DiBitonto, “Theoretical models of the electrical discharge machining process. II. The anode erosion model,” Journal of Applied Physics, vol. 66, no. 9, pp. 4104–4111, 1989. View at Publisher · View at Google Scholar · View at Scopus
  21. P. T. Eubank, M. R. Patel, M. A. Barrufet, and B. Bozkurt, “Theoretical models of the electrical discharge machining process. III. the variable mass, cylindrical plasma model,” Journal of Applied Physics, vol. 73, no. 11, pp. 7900–7909, 1993. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Das, M. Klotz, and F. Klocke, “EDM simulation: Finite element-based calculation of deformation, microstructure and residual stresses,” Journal of Materials Processing Technology, vol. 142, no. 2, pp. 434–451, 2003. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Tao, J. Ni, and A. J. Shih, “Modeling of the Anode Crater Formation in Electrical Discharge Machining,” Journal of Manufacturing Science and Engineering, vol. 134, pp. 192–197, 2012. View at Google Scholar
  24. C. B. Wei, X. B. Tian, S. Q. Yang, X. B. Wang, R. K. Y. Fu, and P. K. Chu, “Anode current effects in plasma electrolytic oxidation,” Surface and Coatings Technology, vol. 201, no. 9-11, pp. 5021–5024, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. T. Wei, F. Yan, and J. Tian, “Characterization and wear- and corrosion-resistance of microarc oxidation ceramic coatings on aluminum alloy,” Journal of Alloys and Compounds, vol. 389, no. 1-2, pp. 169–176, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. H.-H. Wu, Z.-S. Jin, B.-Y. Long, F.-R. Yu, and X.-Y. Lu, “Characterization of microarc oxidation process on aluminium alloy,” Chinese Physics Letters, vol. 20, no. 10, pp. 1815–1818, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. R. McPherson, “Formation of metastable phases in flame- and plasma-prepared alumina,” Journal of Materials Science, vol. 8, no. 6, pp. 851–858, 1973. View at Publisher · View at Google Scholar · View at Scopus
  28. J. Li, H. Cai, X. Xue, and B. Jiang, “The outward-inward growth behavior of microarc oxidation coatings in phosphate and silicate solution,” Materials Letters, vol. 64, no. 19, pp. 2102–2104, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. Z. Shi, G. Song, and A. Atrens, “Influence of anodising current on the corrosion resistance of anodised AZ91D magnesium alloy,” Corrosion Science, vol. 48, no. 8, pp. 1939–1959, 2006. View at Publisher · View at Google Scholar · View at Scopus
  30. L. Zhu, Z. Guo, Y. Zhang, Z. Li, and M. Sui, “A mechanism for the growth of a plasma electrolytic oxide coating on Al,” Electrochimica Acta, vol. 208, pp. 296–303, 2016. View at Publisher · View at Google Scholar · View at Scopus
  31. J.-H. Wang, M.-H. Du, F.-Z. Han, and J. Yang, “Effects of the ratio of anodic and cathodic currents on the characteristics of micro-arc oxidation ceramic coatings on Al alloys,” Applied Surface Science, vol. 292, pp. 658–664, 2014. View at Publisher · View at Google Scholar · View at Scopus
  32. M. Tang, W. Li, H. Liu, and L. Zhu, “Influence of titania sol in the electrolyte on characteristics of the microarc oxidation coating formed on 2A70 aluminum alloy,” Surface and Coatings Technology, vol. 205, no. 17-18, pp. 4135–4140, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. R. H. U. Khan, A. Yerokhin, X. Li, H. Dong, and A. Matthews, “Surface characterisation of DC plasma electrolytic oxidation treated 6082 aluminium alloy: Effect of current density and electrolyte concentration,” Surface and Coatings Technology, vol. 205, no. 6, pp. 1679–1688, 2010. View at Publisher · View at Google Scholar · View at Scopus