Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 2437270, 12 pages
https://doi.org/10.1155/2017/2437270
Research Article

Experimental Investigation and Quantitative Calculation of the Degree of Hydration and Products in Fly Ash-Cement Mixtures

1State Key Laboratory of Geomechanics & Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China
2Jiangsu Key Laboratory of Environmental Impact and Structural Safety in Engineering, China University of Mining and Technology, Xuzhou 221116, China
3Jiangsu Key Laboratory for Construction Materials, Southeast University, Nanjing 211189, China

Correspondence should be addressed to Zhiyong Liu; moc.361@8270gnoyihzuil

Received 10 July 2016; Revised 7 October 2016; Accepted 30 November 2016; Published 9 January 2017

Academic Editor: Jun Liu

Copyright © 2017 Zhiyong Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K.-H. Yang, Y.-B. Jung, M.-S. Cho, and S.-H. Tae, “Effect of supplementary cementitious materials on reduction of CO2 emissions from concrete,” Journal of Cleaner Production, vol. 103, pp. 774–783, 2015. View at Publisher · View at Google Scholar · View at Scopus
  2. T. Sato and J. J. Beaudoin, “Effect of nano-CaCO3 on hydration of cement containing supplementary cementitious materials,” Advances in Cement Research, vol. 23, no. 1, pp. 33–43, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. Z. Liu, Y. Zhang, and Q. Jiang, “Continuous tracking of the relationship between resistivity and pore structure of cement pastes,” Construction and Building Materials, vol. 53, pp. 26–31, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. R. Snellings, G. Mertens, and J. Elsen, “Supplementary cementitious materials,” Reviews in Mineralogy and Geochemistry, vol. 74, pp. 211–278, 2012. View at Publisher · View at Google Scholar · View at Scopus
  5. L. Lam, Y. L. Wong, and C. S. Poon, “Degree of hydration and gel/space ratio of high-volume fly ash/cement systems,” Cement and Concrete Research, vol. 30, no. 5, pp. 747–756, 2000. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Ahmaruzzaman, “A review on the utilization of fly ash,” Progress in Energy and Combustion Science, vol. 36, no. 3, pp. 327–363, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. P. Hou, S. Kawashima, D. Kong, D. J. Corr, J. Qian, and S. P. Shah, “Modification effects of colloidal nanoSiO2 on cement hydration and its gel property,” Composites Part B: Engineering, vol. 45, no. 1, pp. 440–448, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. J. David Raja Selvam, D. S. Robinson Smart, and I. Dinaharan, “Microstructure and some mechanical properties of fly ash particulate reinforced AA6061 aluminum alloy composites prepared by compocasting,” Materials & Design, vol. 49, pp. 28–34, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Feldman, L. R. Prudencio Jr., and G. Chan, “Rapid chloride permeability test on blended cement and other concretes: correlations between charge, initial current and conductivity,” Construction and Building Materials, vol. 13, no. 3, pp. 149–154, 1999. View at Publisher · View at Google Scholar · View at Scopus
  10. S. W. M. Supit and F. U. A. Shaikh, “Durability properties of high volume fly ash concrete containing nano-silica,” Materials and Structures/Materiaux et Constructions, vol. 48, no. 8, pp. 2431–2445, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. N. Neithalath and J. Jain, “Relating rapid chloride transport parameters of concretes to microstructural features extracted from electrical impedance,” Cement and Concrete Research, vol. 40, no. 7, pp. 1041–1051, 2010. View at Publisher · View at Google Scholar · View at Scopus
  12. G. Land and D. Stephan, “The influence of nano-silica on the hydration of ordinary Portland cement,” Journal of Materials Science, vol. 47, no. 2, pp. 1011–1017, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Justs, M. Wyrzykowski, F. Winnefeld, D. Bajare, and P. Lura, “Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio,” Journal of Thermal Analysis and Calorimetry, vol. 115, no. 1, pp. 425–432, 2014. View at Publisher · View at Google Scholar · View at Scopus
  14. Z. Liu, Y. Zhang, Q. Jiang, W. Zhang, and J. Wu, “Solid phases percolation and capillary pores depercolation in hydrating cement pastes,” Journal of Materials in Civil Engineering, vol. 26, no. 12, Article ID 04014090, 2014. View at Publisher · View at Google Scholar · View at Scopus
  15. B. Uzal and L. Turanlı, “Blended cements containing high volume of natural zeolites: properties, hydration and paste microstructure,” Cement and Concrete Composites, vol. 34, no. 1, pp. 101–109, 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. Y. Kocak and S. Nas, “The effect of using fly ash on the strength and hydration characteristics of blended cements,” Construction and Building Materials, vol. 73, pp. 25–32, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. D. D. Nguyen, L. P. Devlin, P. Koshy, and C. C. Sorrell, “Effects of acetic acid on early hydration of Portland cement,” Journal of Thermal Analysis and Calorimetry, vol. 123, no. 1, pp. 489–499, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. D. P. Bentz, R. J. Detwiler, E. J. Garboczi, P. Halamickova, and M. Schwartz, “Multi-scale modeling of the diffusivity of mortar and concrete,” in Proceedings of the Chloride Penetration into Concrete, L. O. Nilsson and J. P. Ollivier, Eds., pp. 85–94, RILEM, 1997.
  19. M. W. Grutzeck, D. Shi, G. Liu, and S. Kwan, “Computer simulation of interfacial packing in concrete,” Journal of Materials Science, vol. 28, no. 13, pp. 3444–3450, 1993. View at Publisher · View at Google Scholar · View at Scopus
  20. D. P. Bentz, “Influence of silica fume on diffusivity in cement-based materials. II. Multi-scale modeling of concrete diffusivity,” Cement and Concrete Research, vol. 30, no. 7, pp. 1121–1129, 2000. View at Publisher · View at Google Scholar · View at Scopus
  21. M. Voltolini, M. C. Dalconi, G. Artioli et al., “Understanding cement hydration at the microscale: new opportunities from ‘pencil-beam’ synchrotron X-ray diffraction tomography,” Journal of Applied Crystallography, vol. 46, no. 1, pp. 142–152, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. Z. Liu, W. Chen, Y. Zhang, and H. Lv, “A three-dimensional multi-scale method to simulate the ion transport behavior of cement-based materials,” Construction & Building Materials, vol. 120, pp. 494–503, 2016. View at Publisher · View at Google Scholar
  23. B. A. Suprenant and G. Papadopoulos, “Selective dissolution of portland-fly-ash cements,” Journal of Materials in Civil Engineering, vol. 3, no. 1, pp. 48–59, 1991. View at Publisher · View at Google Scholar · View at Scopus
  24. D. P. Bentz, E. J. Garboczi, and K. A. Snyder, “A hard core/soft shell microstructural model for studying percolation and transport in three-dimensional composite media,” NISTIR 6265, U.S. Department of Commerce, 1999. View at Google Scholar
  25. X.-Y. Wang, H.-S. Lee, and K.-B. Park, “Simulation of low-calcium fly ash blended cement hydration,” ACI Materials Journal, vol. 106, no. 2, pp. 167–175, 2009. View at Google Scholar · View at Scopus
  26. Q. Zeng, K. Li, T. Fen-Chong, and P. Dangla, “Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes,” Construction and Building Materials, vol. 27, no. 1, pp. 560–569, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. A. M. Neville, Properties of Concrete, Addison Wesley Longman, Essex, UK, 4th edition, 1996.
  28. C. C. Yang, “The relationship between charge passed and the chloride concentrations in anode and cathode cells using the accelerated chloride migration test,” Materials and Structures, vol. 36, no. 264, pp. 678–684, 2003. View at Publisher · View at Google Scholar · View at Scopus
  29. T. C. Powers, “Structure and physical properties of hardened portland cement paste,” Journal of the American Ceramic Society, vol. 41, no. 1, pp. 1–6, 1958. View at Publisher · View at Google Scholar
  30. V. G. Papadakis, “Effect of fly ash on Portland cement systems: part I. Low-calcium fly ash,” Cement and Concrete Research, vol. 29, no. 11, pp. 1727–1736, 1999. View at Publisher · View at Google Scholar · View at Scopus
  31. A. Xu and S. L. Sarkar, “Microstructural development in high-volume fly-ash cement system,” Journal of Materials in Civil Engineering, vol. 6, no. 1, pp. 117–136, 1994. View at Publisher · View at Google Scholar · View at Scopus
  32. Y. M. Zhang, W. Sun, and H. D. Yan, “Hydration of high-volume fly ash cement pastes,” Cement and Concrete Composites, vol. 22, no. 6, pp. 445–452, 2000. View at Publisher · View at Google Scholar · View at Scopus