Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 2473283, 11 pages
https://doi.org/10.1155/2017/2473283
Research Article

Properties of Direct Coal Liquefaction Residue Modified Asphalt Mixture

1School of Civil Engineering and Transportation, Beijing University of Civil Engineering and Architecture and Beijing Urban Transportation Infrastructure Engineering Technology Research Center, Beijing 100044, China
2Department of Civil and Environmental Engineering, Michigan Technological University and School of Traffic and Transportation, Changsha University of Science and Technology, 1400 Townsend Drive, Houghton, MI 49931, USA
3Beijing Urban Transportation Infrastructure Engineering Technology Research Center and Beijing Collaborative Innovation Center for Metropolitan Transportation, Beijing 100044, China
4School of Civil Engineering and Transportation, Beijing University of Civil Engineering and Architecture and Beijing Cooperative Innovation Research Center on Energy Saving and Emission Reduction, Beijing 100044, China
5Department of Civil and Environmental Engineering, Michigan Technological University, 1400 Townsend Drive, Houghton, MI 49931, USA

Correspondence should be addressed to Hui Yao; ude.utm@oayiuh

Received 30 November 2016; Accepted 2 February 2017; Published 21 February 2017

Academic Editor: Antonio Riveiro

Copyright © 2017 Jie Ji et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. S. R. I. o. M. o. Communications, Standard Test Methods for Asphalt and Asphalt Mixtures for Highway Engineering (JTG E20-2011), People's Communication Press, Beijing, China, 2011.
  2. M. W. Witzcak, Simple Performance Test for Superpave Mix Design, vol. 465, Transportation Research Board, 2002.
  3. A. Loizos, G. Boukovalas, and A. Karlaftis, “Dynamic stiffness modulus for pavement subgrade evaluation,” Journal of Transportation Engineering, vol. 129, no. 4, pp. 434–443, 2003. View at Publisher · View at Google Scholar · View at Scopus
  4. R. F. Bonaquist, Precision of the Dynamic Modulus and Flow Number Tests Conducted with the Asphalt Mixture Performance Tester, vol. 702, Transportation Research Board, 2011.
  5. M. W. Witczak, Specification Criteria for Simple Performance Tests for Rutting, vol. 1, Transportation Research Board, 2007.
  6. R. F. Bonaquist, Ruggedness Testing of the Dynamic Modulus and Flow Number Tests with the Simple Performance Tester, 2008. View at Publisher · View at Google Scholar
  7. Y. Zhang, R. Luo, and R. L. Lytton, “Characterizing permanent deformation and fracture of asphalt mixtures by using compressive dynamic modulus tests,” Journal of Materials in Civil Engineering, vol. 24, no. 7, pp. 898–906, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. A. K. Apeagyei, “Rutting as a function of dynamic modulus and gradation,” Journal of Materials in Civil Engineering, vol. 23, no. 9, pp. 1302–1310, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Zhu, L. Sun, J. Yang, Z. Chen, and W. Gu, “Developing master curves and predicting dynamic modulus of polymer-modified asphalt mixtures,” Journal of Materials in Civil Engineering, vol. 23, no. 2, pp. 131–137, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. J.-C. Wei, S.-P. Cui, and J.-B. Hu, “Research on dynamic modulus of asphalt mixtures,” Journal of Building Materials, vol. 11, no. 6, pp. 657–661, 2008. View at Google Scholar · View at Scopus
  11. T. R. Clyne, M. O. Marasteanu, X. Li et al., Dynamic and Resilient Modulus of Mn/DOT Asphalt Mixtures, Minnesota Department of Transportation: Department of Civil Engineering, University of Minnesota, 2003.
  12. T. Pellinen and M. Witczak, “Stress dependent master curve construction for dynamic (complex) modulus (with discussion),” Journal of the Association of Asphalt Paving Technologists, vol. 71, pp. 281–309, 2002. View at Google Scholar
  13. M. Witczak, D. Andrei, and W. Houston, “Development of the 2002 guide for the design of new and rehabilitated pavement structures,” Inter Team Technical Report (Seasonal 1), Resilient Modulus as Function of Soil Moisture—Summary of Predictive Models, College of Engineering and Applied Sciences, Department of Civil and Environmental Engineering, Arizona State University, 2000. View at Google Scholar
  14. J. P. Hallin, “Development of the 2002 guide for the design of new and rehabilitated pavement structures: phase II,” Report for National Cooperative Highway Research Program, Transportation Research Board, National Research Council, 2004. View at Google Scholar
  15. E. Chailleux, G. Ramond, C. Such, and C. De La Roche, “A mathematical-based master-curve construction method applied to complex modulus of bituminous materials,” Road Materials and Pavement Design, vol. 7, no. s1, pp. 75–92, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. X. Zhang, F. Chi, L. Wang, and J. Shi, “Study on viscoelastic performance of asphalt mixture based on CAM model,” Journal of Southeast University, vol. 24, no. 4, pp. 498–502, 2008. View at Google Scholar · View at Scopus
  17. Y. Yin, Research on Dynamic Viscoelastic Characteristics and Shear Modulus Predicting Methods for Aspgalt Mixtures Based on Dynamic Mechanical Analysis (DMA) Means, South China University of Technology, Guangzhou, China, 2010.
  18. C. Wu and K. Xie, Direct Coal Liquefaction, Chemical Industry Press, Beijing, China, 2010.
  19. W. Zhang, J. Jin, H. Yu, and L. Tian, “Coal direct hydrogenation liquefaction process,” Clean Coal Technology, vol. 7, no. 3, pp. 31–33, 2001. View at Google Scholar
  20. X. Gu, “Properties and utilization of coal direct liquefaction residue,” Clean Coal Technology, vol. 18, no. 3, pp. 24–31, 2012. View at Google Scholar
  21. S. Khare and M. Dell'Amico, “An overview of conversion of residues from coal liquefaction processes,” The Canadian Journal of Chemical Engineering, vol. 91, no. 10, pp. 1660–1670, 2013. View at Publisher · View at Google Scholar · View at Scopus
  22. L. He, Study on the preparation and performance of asphalt modified by coal liquefaction residue [M.S. thesis], Highway School, Chang'an University, Xi'an, China, 2013.
  23. Y. Zhang, Exploratory Study on Direct Coal Liquefaction Residue Modified Asphalt, Engineering, Northwest University, Xi'an, China, 2012.
  24. Y.-S. Zhao and J. Ji, “Study on the performance of direct coal liquefaction residue modified mixture asphalt,” in Challenges and Advances in Sustainable Transportation Systems: Plan, Design, Build, Manage, and Maintain, p. 319, ASCE, 2014. View at Google Scholar
  25. J. Ji, Y.-S. Zhao, and S. F. Xu, “Study on properties of the blends with direct coal liquefaction residue and asphalt,” Applied Mechanics and Materials, vol. 488-489, pp. 316–321, 2014. View at Publisher · View at Google Scholar · View at Scopus
  26. D.-R. Zhang, R. Luo, Y. Chen, S.-Z. Zhang, and Y. Sheng, “Performance analysis of DCLR-modified asphalt based on surface free energy,” China Journal of Highway and Transport, vol. 29, no. 1, pp. 22–28, 2016. View at Google Scholar · View at Scopus
  27. Q. Zhang, H. Pei-wen, and B. Zheng-yu, “Research on preparation and adhesion of emulsified asphalt modified with waterborne epoxy resin,” Journal of Highway and Transportation Research and Development, no. 9, pp. 9–14, 2015. View at Google Scholar
  28. J. Chen, M. Sun, X.-M. Dai et al., “Asphalt modification with direct coal liquefaction residue based on benzaldehyde crosslinking agent,” Journal of Fuel Chemistry and Technology, no. 9, pp. 1052–1060, 2015. View at Google Scholar · View at Scopus
  29. Z. Liu, H. Song, Z. Ma et al., “Preparation of mesophase pitch from the residue of coal liquefaction by solvent hydrogenation,” Carbon Techniques, no. 2, pp. 18–22, 2016. View at Google Scholar
  30. J.-F. Corte, “Development and uses of hard-grade asphalt and of high-modulus asphalt mixes in France,” Transportation Research Circular, vol. 503, pp. 12–31, 2001. View at Google Scholar
  31. T. C. R. I. o. L. Province, Technical Specification Construction of High Modulus Asphalt Mixture (DB21/T 1754-2009), People's Communication Press, Beijing, China, 2009.
  32. X. Li, Mechanical Engineering and Control Systems: Proceedings of the 2015 International Conference on Mechanical Engineering and Control Systems (MECS2015), World Scientific Publishing, 2016.
  33. G. A. Tannoury and R. C. E. University of Nevada, Laboratory Evaluation of Hot Mix Asphalt Mixtures for Nevada's Intersections—Phase II, University of Nevada, Reno, Nev, USA, 2007.
  34. H. Yao, Z. You, L. Li, S. W. Goh, and C. Dedene, “Evaluation of the master curves for complex shear modulus for nano-modified asphalt binders,” in Proceedings of the 12th COTA International Conference of Transportation Professionals (CICTP '12), pp. 3399–3414, August 2012. View at Publisher · View at Google Scholar · View at Scopus
  35. M. Zeng, H. U. Bahia, H. Zhai, M. R. Anderson, and P. Turner, “Rheological modeling of modified asphalt binders and mixtures (with discussion),” Journal of the Association of Asphalt Paving Technologists, vol. 70, pp. 403–441, 2001. View at Google Scholar