Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 2748070, 9 pages
https://doi.org/10.1155/2017/2748070
Research Article

Optimization of Alumina Slurry for Oxide-Oxide Ceramic Composites Manufactured by Injection Molding

NSERC-Safran Chair on 3D Composites for Aerospace, Department of Mechanical Engineering, École Polytechnique de Montréal, P.O. Box 6079, Centre-Ville Station, Montréal, QC, Canada H3C 3A7

Correspondence should be addressed to Catherine Billotte; ac.ltmylop@ettollib.enirehtac

Received 13 March 2017; Revised 8 June 2017; Accepted 5 July 2017; Published 7 August 2017

Academic Editor: Marco Rossi

Copyright © 2017 Catherine Billotte et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Parlier and M. H. Ritti, “State of the art and perspectives for oxide/oxide composites,” Aerospace Science and Technology, vol. 7, no. 3, pp. 211–221, 2003. View at Publisher · View at Google Scholar · View at Scopus
  2. P. Colomban and G. Gouadec, “The ideal ceramic-fibre/oxide-matrix composite: how to reconcile antagonist physical and chemical requirements ?” Annales de Chimie: Science des Materiaux, vol. 30, no. 6, pp. 673–688, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. F. W. Zok, “Developments in oxide fiber composites,” Journal of the American Ceramic Society, vol. 89, no. 11, pp. 3309–3324, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. J. H. Weaver, J. Rannou, M. A. Mattoni, and F. W. Zok, “Interface properties in a porous-matrix oxide composite,” Journal of the American Ceramic Society, vol. 89, no. 9, pp. 2869–2873, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. C. G. Levi, J. Y. Yang, B. J. Dalgleish, F. W. Zok, and A. G. Evans, “Processing and performance of an all-oxide ceramic composite,” Journal of the American Ceramic Society, vol. 81, no. 8, pp. 2077–2086, 1998. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Podgorski, C. Billotte Cabre, B. Dambrine, L. Molliex, E. Ruiz, and S. Turenne, “Method for manufacturing part made of composite material,” 2016.
  7. M. Podgorski, C. Billotte Cabre, B. Dambrine, L. Molliex, E. Ruiz, and S. Turenne, “Method for manufacturing a refractory part made of composte material,” 2016.
  8. G. V. Franks and Y. Gan, “Charging behavior at the alumina-water interface and implications for ceramic processing,” Journal of the American Ceramic Society, vol. 90, no. 11, pp. 3373–3388, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. P. Tomasik, C. H. Schilling, R. Jankowiak, and J.-C. Kim, “The role of organic dispersants in aqueous alumina suspensions,” Journal of the European Ceramic Society, vol. 23, no. 6, pp. 913–919, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. M. Parlier, M. H. Ritti, and A. Jankowiak, “Potential and perspectives for oxide/oxide composites,” Journal Aerospace Lab, vol. 3, pp. 1–11, 2011. View at Google Scholar
  11. S. Çinar and M. Akinc, “Ascorbic acid as a dispersant for concentrated alumina nanopowder suspensions,” Journal of the European Ceramic Society, vol. 34, no. 8, pp. 1997–2004, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Çinar, D. D. Anderson, and M. Akinc, “Influence of bound water layer on the viscosity of oxide nanopowder suspensions,” Journal of the European Ceramic Society, vol. 35, no. 2, pp. 613–622, 2015. View at Publisher · View at Google Scholar · View at Scopus
  13. M. N. Rahaman, “Science of colloidal processing,” in Ceramic Processing and Sintering, pp. 181–245, Marcel Dekker, Inc., New York, NY, USA, 2003. View at Google Scholar
  14. N. Kiratzis and P. F. Luckham, “Rheological behavior of stabilized aqueous alumina dispersions in presence of hydroxyethyl cellulose,” Journal of the European Ceramic Society, vol. 18, no. 7, pp. 783–790, 1998. View at Publisher · View at Google Scholar · View at Scopus
  15. N. E. Kiratzis and P. F. Luckham, “The rheology of aqueous alumina suspensions in the presence of hydroxyethylcellulose as binder,” Journal of the European Ceramic Society, vol. 19, no. 15, pp. 2605–2612, 1999. View at Publisher · View at Google Scholar · View at Scopus
  16. M. R. Ben Romdhane, S. Baklouti, J. Bouaziz, T. Chartier, and J.-F. Baumard, “Dispersion of Al2O3 concentrated suspensions with new molecules able to act as binder,” Journal of the European Ceramic Society, vol. 24, no. 9, pp. 2723–2731, 2004. View at Publisher · View at Google Scholar · View at Scopus
  17. Y.-K. Leong, “Role of molecular architecture of citric and related polyacids on the yield stress of α-alumina slurries: inter- and intramolecular forces,” Journal of the American Ceramic Society, vol. 93, no. 9, pp. 2598–2605, 2010. View at Publisher · View at Google Scholar · View at Scopus
  18. K. Sato, H. Yilmaz, A. Ijuin, Y. Hotta, and K. Watari, “Acetic acid mediated interactions between alumina surfaces,” Applied Surface Science, vol. 258, no. 8, pp. 4011–4015, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. L. F. G. Setz, A. C. Silva, S. C. Santos, S. R. H. Mello-Castanho, and M. R. Morelli, “A viscoelastic approach from α-Al2O3 suspensions with high solids content,” Journal of the European Ceramic Society, vol. 33, no. 15-16, pp. 3211–3219, 2013. View at Publisher · View at Google Scholar · View at Scopus
  20. L. Stappers, L. Zhang, O. Van der Biest, and J. Fransaer, “The effect of electrolyte conductivity on electrophoretic deposition,” Journal of Colloid and Interface Science, vol. 328, no. 2, pp. 436–446, 2008. View at Publisher · View at Google Scholar · View at Scopus
  21. F. Chabert, D. E. Dunstan, and G. V. Franks, “Cross-linked polyvinyl alcohol as a binder for gelcasting and green machining,” Journal of the American Ceramic Society, vol. 91, no. 10, pp. 3138–3146, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. S. Baklouti, T. Chartier, and J. F. Baumard, “Binder distribution in spray-dried alumina agglomerates,” Journal of the European Ceramic Society, vol. 18, no. 14, pp. 2117–2121, 1998. View at Publisher · View at Google Scholar · View at Scopus
  23. A. L. Ahmad, M. R. Othman, and N. F. Idrus, “Synthesis and characterization of nano-composite alumina-titania ceramic membrane for gas separation,” Journal of the American Ceramic Society, vol. 89, no. 10, pp. 3187–3193, 2006. View at Publisher · View at Google Scholar · View at Scopus
  24. M. A. Huha and J. A. Lewis, “Polymer effects on the chemorheological and drying behavior of alumina-poly(vinyl alcohol) gelcasting suspensions,” Journal of the American Ceramic Society, vol. 83, no. 8, pp. 1957–1963, 2000. View at Publisher · View at Google Scholar · View at Scopus
  25. K. Livanov, H. Jelitto, B. Bar-On, K. Schulte, G. A. Schneider, and D. H. Wagner, “Tough alumina/polymer layered composites with high ceramic content,” Journal of the American Ceramic Society, vol. 98, no. 4, pp. 1285–1291, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. C. Billotte, P. J. Carreau, and M.-C. Heuzey, “Rheological characterization of a solder paste for surface mount applications,” Rheologica Acta, vol. 45, no. 4, pp. 374–386, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. G. P. Citerne, P. J. Carreau, and M. Moan, “Rheological properties of peanut butter,” Rheologica Acta, vol. 40, no. 1, pp. 86–96, 2001. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Baklouti, J. Bouaziz, T. Chartier, and J.-F. Baumard, “Binder burnout and evolution of the mechanical strength of dry-pressed ceramics containing poly (vinyl alcohol),” Journal of the European Ceramic Society, vol. 21, no. 8, pp. 1087–1092, 2001. View at Publisher · View at Google Scholar · View at Scopus
  29. M. Wiśniewska, S. Chibowski, T. Urban, and D. Sternik, “Investigation of the alumina properties with adsorbed polyvinyl alcohol,” Journal of Thermal Analysis and Calorimetry, vol. 103, no. 1, pp. 329–337, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. S. Chibowski, M. Paszkiewicz, and M. Krupa, “Investigation of the influence of the polyvinyl alcohol adsorption on the electrical properties of Al2O3-solution interface, thickness of the adsorption layers of PVA,” Powder Technology, vol. 107, no. 3, pp. 251–255, 2000. View at Publisher · View at Google Scholar · View at Scopus
  31. D. Santhiya, S. Subramanian, K. A. Natarajan, and S. G. Malghan, “Surface chemical studies on the competitive adsorption of poly(acrylic acid) and poly(vinyl alcohol) onto alumina,” Journal of Colloid and Interface Science, vol. 216, no. 1, pp. 143–153, 1999. View at Publisher · View at Google Scholar · View at Scopus
  32. F. Bensadoun, N. Kchit, C. Billotte, S. Bickerton, F. Trochu, and E. Ruiz, “A study of nanoclay reinforcement of biocomposites made by liquid composite molding,” International Journal of Polymer Science, vol. 2011, Article ID 964193, 10 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. F. Bensadoun, N. Kchit, C. Billotte, F. Trochu, and E. Ruiz, “A comparative study of dispersion techniques for nanocomposite made with nanoclays and an unsaturated polyester resin,” Journal of Nanomaterials, vol. 2011, Article ID 406087, 2011. View at Publisher · View at Google Scholar · View at Scopus
  34. A. B. Metzner, “Rheology of suspensions in polymeric liquids,” Journal of Rheology, vol. 29, no. 6, pp. 739–775, 1985. View at Publisher · View at Google Scholar · View at Scopus
  35. A. J. Poslinski, M. E. Ryan, R. K. Gupta, S. G. Seshadri, and F. J. Frechette, “Rheological behavior of filled polymeric systems I. Yield stress and shear-thinning effects,” Journal of Rheology, vol. 32, no. 7, pp. 703–735, 1988. View at Publisher · View at Google Scholar · View at Scopus