Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 3431093, 17 pages
https://doi.org/10.1155/2017/3431093
Research Article

Experimental Investigation of Delamination Growth in Composite Laminates under a Compressive Load

1Dipartimento di Ingegneria Industriale e dell’Informazione, Università degli Studi della Campania “Luigi Vanvitelli”, Via Roma 29, 81031 Aversa, Italy
2Institute for Composite and Biomedical Materials, National Research Council (CNR), Portici, Italy
3CIRA Italian Aerospace Research Centre, Via Maiorise s/n, Capua, Italy

Correspondence should be addressed to A. Riccio; ti.ainapmacinu@oiccir.olleina

Received 8 February 2017; Revised 19 April 2017; Accepted 2 May 2017; Published 5 July 2017

Academic Editor: Paulo M. S. T. De Castro

Copyright © 2017 A. Riccio et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. Couchman and A. Mouritz, Modeling of Naval Composite Structures in Fire, Acclaim Printing Services, Victoria, Australia, 2006.
  2. S. Abrate, Impact on Composite Structures, Cambridge University Press, 1998. View at Publisher · View at Google Scholar
  3. A. Raimondo and A. Riccio, “Inter-laminar and intra-laminar damage evolution in composite panels with skin-stringer debonding under compression,” Composites Part B: Engineering, vol. 94, pp. 139–151, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Riccio, M. Damiano, A. Raimondo, G. Di Felice, and A. Sellitto, “A fast numerical procedure for the simulation of inter-laminar damage growth in stiffened composite panels,” Composite Structures, vol. 145, pp. 203–216, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. R. Borrelli, A. Riccio, A. Sellitto, F. Caputo, and T. Ludwig, “On the use of global-local kinematic coupling approaches for delamination growth simulation in stiffened composite panels,” Composites Science and Technology, vol. 115, pp. 43–51, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. D. D. Symons and G. Davis, “Fatigue testing of impact-damaged T300/914 carbon-fibre-reinforced plastic,” Composites Science and Technology, vol. 60, no. 3, pp. 379–389, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. A. A. Baker, R. Jones, and R. J. Callinan, “Damage tolerance of graphite/epoxy composites,” Composite Structures, vol. 4, no. 1, pp. 15–44, 1985. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Cricrì and M. Perrella, “Investigation of mode III fracture behaviour in bonded pultruded GFRP composite joints,” Composites Part B: Engineering, vol. 112, pp. 176–184, 2017. View at Publisher · View at Google Scholar
  9. G. Cricrì, M. Perrella, S. Sessa, and N. Valoroso, “A novel fixture for measuring mode III toughness of bonded assemblies,” Engineering Fracture Mechanics, vol. 138, pp. 1–18, 2015. View at Publisher · View at Google Scholar · View at Scopus
  10. R. Citarella and G. Cricrì, “Three-dimensional BEM and FEM submodelling in a cracked FML full scale aeronautic panel,” Applied Composite Materials, vol. 21, no. 3, pp. 557–577, 2014. View at Publisher · View at Google Scholar · View at Scopus
  11. G. Cricrì, M. Perrella, and C. Calì, “Experimental and numerical post-buckling analysis of thin aluminium aeronautical panels under shear load,” Strain, vol. 50, no. 3, pp. 208–222, 2014. View at Publisher · View at Google Scholar · View at Scopus
  12. S. Sanchez-Saez, E. Barbero, R. Zaera, and C. Navarro, “Compression after impact of thin composite laminates,” Composites Science and Technology, vol. 65, no. 13, pp. 1911–1919, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Shipsha and D. Zenkert, “Compression-after-impact strength of sandwich panels with core crushing damage,” Applied Composite Materials, vol. 12, no. 3-4, pp. 149–164, 2005. View at Publisher · View at Google Scholar · View at Scopus
  14. X. Wang, J.-F. Witz, A. El Bartali, and C. Jiang, “Infrared thermography coupled with digital image correlation in studying plastic deformation on the mesoscale level,” Optics and Lasers in Engineering, vol. 86, pp. 264–274, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. G. Gaussorgues, Infrared Thermography, Chapman & Hall, London, UK, 1994.
  16. S. Datcu, L. Ibos, Y. Candau, and S. Matteï, “Improvement of building wall surface temperature measurements by infrared thermography,” Infrared Physics and Technology, vol. 46, no. 6, pp. 451–467, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. M. Poncelet, J.-F. Witz, H. Pron, and B. Wattrisse, “A study of IRFPA camera measurement errors: Radiometric artefacts,” Quantitative InfraRed Thermography Journal, vol. 8, no. 1, pp. 3–20, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. M. A. Sutton, J. J. Orteu, and H. Schreier, Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts, Theory and Applications, Springer, New York, NY, USA, 2009.
  19. B. Pan, K. Qian, H. Xie, and A. Asundi, “Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review,” Measurement Science and Technology, vol. 20, no. 6, article 062001, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. B. Pan, A. Asundi, H. Xie, and J. Gao, “Digital image correlation using iterative least squares and pointwise least squares for displacement field and strain field measurements,” Optics and Lasers in Engineering, vol. 47, no. 7-8, pp. 865–874, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. B. Pan and K. Li, “A fast digital image correlation method for deformation measurement,” Optics and Lasers in Engineering, vol. 49, no. 7, pp. 841–847, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. B. Pan, J. Yuan, and Y. Xia, “Strain field denoising for digital image correlation using a regularized cost-function,” Optics and Lasers in Engineering, vol. 65, no. 0, pp. 9–17, 2014. View at Publisher · View at Google Scholar · View at Scopus
  23. C. Cofaru, W. Philips, and W. Van Paepegem, “A three-frame digital image correlation (DIC) method for the measurement of small displacements and strains,” Measurement Science and Technology, vol. 23, no. 10, article 105406, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. W. T. Kim, M. Y. Choi, and J. H. Park, “Diagnosis of defect points in materials using infrared thermography,” Key Engineering Materials, vol. 297-300, pp. 2169–2175, 2005. View at Publisher · View at Google Scholar · View at Scopus
  25. J.-H. Park, M.-Y. Choi, and W.-T. Kim, “Infrared thermography and modeling to the concrete deck with internal defects as a non-destructive testing,” Key Engineering Materials, vol. 270-273, pp. 938–943, 2004. View at Publisher · View at Google Scholar · View at Scopus
  26. G. Busse, D. Wu, and W. Karpen, “Thermal wave imaging with phase sensitive modulated thermography,” Journal of Applied Physics, vol. 71, no. 8, pp. 3962–3965, 1992. View at Publisher · View at Google Scholar · View at Scopus
  27. O. Breitenstein and M. Langenkamp, “Lock-in contact thermography investigation of lateral electronic inhomogeneities in semiconductor devices,” Sensors and Actuators, A: Physical, vol. 71, no. 1-2, pp. 46–50, 1998. View at Publisher · View at Google Scholar · View at Scopus
  28. http://thermosensorik.com/.
  29. S. Huth, O. Breitenstein, A. Huber, D. Dantz, U. Lambert, and F. Altmann, “Lock-in IR-thermography—a novel tool for material and device characterization,” Solid State Phenomena, vol. 82-84, pp. 741–746, 2002. View at Publisher · View at Google Scholar · View at Scopus
  30. B. Pan and H. Xie, “Full-field strain measurement based on least-square fitting of local displacement for digital image correlation method,” Acta Optica Sinica, vol. 27, no. 11, pp. 1980–1986, 2007. View at Google Scholar · View at Scopus
  31. M. Wisnom, F. Pierron, C. Devivier, and D. Thompson, “Correlation between full-field measurements and numerical simulation results for multiple delamination composite specimens in bending,” Applied Mechanics and Materials, vol. 24, pp. 109–114, 2010. View at Google Scholar
  32. C. Devivier, F. Pierron, and M. R. Wisnom, “Damage detection in composite materials using deflectometry, a full-field slope measurement technique,” Composites Part A: Applied Science and Manufacturing, vol. 43, no. 10, pp. 1650–1666, 2012. View at Publisher · View at Google Scholar · View at Scopus
  33. L. Yang, P. Zhang, S. Liu, P. R. Samala, M. Su, and H. Yokota, “Measurement of strain distributions in mouse femora with 3D-digital speckle pattern interferometry,” Optics and Lasers in Engineering, vol. 45, no. 8, pp. 843–851, 2007. View at Publisher · View at Google Scholar · View at Scopus
  34. F. Laurin, J.-S. Charrier, D. Lévêque, J.-F. Maire, A. Mavel, and P. Nuñez, “Determination of the properties of composite materials thanks to digital image correlation measurements,” in Proceedings of the IUTAM Symposium on Full-Field Measurements and Identification in Solid Mechanics, pp. 106–115, July 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. M. A. Caminero, M. Lopez-Pedrosa, C. Pinna, and C. Soutis, “Damage monitoring and analysis of composite laminates with an open hole and adhesively bonded repairs using digital image correlation,” Composites Part B: Engineering, vol. 53, no. 24, pp. 76–91, 2013. View at Publisher · View at Google Scholar · View at Scopus
  36. G. Musotto, Digital Image Correlation: applicazione di tecniche convenzionali e sviluppo di soluzioni innovative per la stima e lincremento dellaccuratezza [M.S. thesis], Politecnico di Milano, Facoltà di Ingegneria Industriale, Corso di Laurea in Ingegneria Meccanica, 2012.