Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017, Article ID 3451289, 15 pages
https://doi.org/10.1155/2017/3451289
Research Article

Design of Laser Welding Parameters for Joining Ti Grade 2 and AW 5754 Aluminium Alloys Using Numerical Simulation

Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in Bratislava, Ulica Jána Bottu č. 2781/25, 917 24 Trnava, Slovakia

Correspondence should be addressed to Mária Behúlová; ks.abuts@avoluheb.airam

Received 17 April 2017; Revised 8 August 2017; Accepted 29 August 2017; Published 16 October 2017

Academic Editor: Ying Li

Copyright © 2017 Mária Behúlová et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Mária Behúlová, Eva Babalová, and Miroslav Sahul, “Design of Laser Welding Parameters for Joining Ti Grade 2 and AW 5754 Aluminium Alloys Using Numerical Simulation,” Advances in Materials Science and Engineering, vol. 2017, Article ID 3451289, 15 pages, 2017. https://doi.org/10.1155/2017/3451289.