Design of Laser Welding Parameters for Joining Ti Grade 2 and AW 5754 Aluminium Alloys Using Numerical Simulation

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="6"><hr/></td></tr><tr class="thead"><td class="align_left">Element</td><td class="align_center">Mg</td><td class="align_center">Mn</td><td class="align_center">Fe</td><td class="align_center">Si</td><td class="align_center">Al</td></tr><tr><td class="thead-hr" colspan="6"><hr/></td></tr><tr><td class="align_left">wt.%</td><td class="align_center">2.6 to 3.2</td><td class="align_center">0.5</td><td class="align_center">0.4</td><td class="align_center">0.4</td><td class="align_center">Balance</td></tr><tr class="table-tr"><td colspan="6"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

Chemical composition of AW 5754 aluminium alloy.

Advances in Materials Science and Engineering

tab2

Table 2

Table 2: Design of Laser Welding Parameters for Joining Ti Grade 2 and AW 5754 Aluminium Alloys Using Numerical Simulation 