Table of Contents Author Guidelines Submit a Manuscript
Advances in Materials Science and Engineering
Volume 2017 (2017), Article ID 3623658, 7 pages
https://doi.org/10.1155/2017/3623658
Research Article

Fatigue Evaluation of Recycled Asphalt Mixture Based on Energy-Controlled Mode

1School of Transportation, Southeast University, Nanjing, Jiangsu 210096, China
2State Engineering Laboratory of Highway Maintenance Technology, Changsha University of Science and Technology, Changsha 410114, China

Correspondence should be addressed to Tao Ma; nc.ude.ues@oatam

Received 14 April 2017; Revised 5 July 2017; Accepted 14 August 2017; Published 14 September 2017

Academic Editor: Meor Othman Hamzah

Copyright © 2017 Tao Ma et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Ma, X. Huang, Y. Zhao, Y. Zhang, and H. Wang, “Influences of preheating temperature of RAP on properties of hot-mix recycled asphalt mixture,” Journal of Testing and Evaluation, vol. 44, no. 2, pp. 762–769, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. T. Ma, Y. Zhao, X. Huang, and Y. Zhang, “Using RAP material in high modulus asphalt mixture,” Journal of Testing and Evaluation, vol. 44, no. 2, pp. 781–787, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. I. L. Alqadi, M. Elseifi, and S. H. Carpenter, “Reclaimed asphalt pavement—a literature review,” Cracking of Asphalt Concrete Pavements, 2007. View at Google Scholar
  4. T. W. Kennedy and W. O. Tam, “Optimizing Use of Reclaimed Asphalt Pavement With the Superpave System,” Asphalt Paving Technol, vol. 67, pp. 311–328, 1998. View at Google Scholar
  5. M. Tusar, E. Nielsen, F. Batista, M. L. Antunes, K. Mollenhauer, and S. Vansteenkiste, “Optimization of reclaimed asphalt in asphalt plant mixing, re-road end of life strategies of asphalt pavements,” European Commission DG Research, 2012. View at Google Scholar
  6. R. Ghabchi, M. Barman, D. Singh, M. Zaman, and M. A. Mubaraki, “Comparison of laboratory performance of asphalt mixes containing different proportions of RAS and RAP,” Construction and Building Materials, vol. 124, pp. 343–351, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. C. Shannon, A. Mokhtari, H. Lee, S. Tang, C. Williams, and S. Schram, “Effects of high reclaimed asphalt-pavement content on the binder grade, fatigue performance, fractionation process, and mix design,” Journal of Materials in Civil Engineering, vol. 29, no. 2, Article ID 04016218, 2017. View at Publisher · View at Google Scholar · View at Scopus
  8. J. Xie and Z. Guo, “Researching on fatigue model of asphalt mixtures,” Journal of Highway and Transportation Research and Development, vol. 24, no. 5, pp. 21–25, 2007. View at Google Scholar
  9. S. Lu, “Research on the selection of the fatigue test control mode of asphalt mixture,” Shandong Jiaotong Keji, vol. 1, pp. 60–63, 2016. View at Google Scholar
  10. H. Wang, Z. X. Dang, L. Li, and Z. P. You, “Analysis on fatigue crack growth laws for crumb rubber modified (CRM) asphalt mixture,” Construction and Building Materials, vol. 47, pp. 1342–1349, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Sabouri, T. Bennert, J. S. Daniel, and Y. R. Kim, “A comprehensive evaluation of the fatigue behaviour of plant-produced rap mixtures,” Road Materials and Pavement Design, vol. 16, pp. 29–54, 2015. View at Google Scholar
  12. S. Tang, R. C. Williams, and A. A. Cascione, “Reconsideration of the fatigue tests for asphalt mixtures and binders containing high percentage RAP,” International Journal of Pavement Engineering, vol. 18, no. 5, pp. 443–449, 2017. View at Publisher · View at Google Scholar · View at Scopus
  13. L. Cong, J. Peng, Z. Guo, and Q. Wang, “Evaluation of fatigue cracking in asphalt mixtures based on surface energy,” Journal of Materials in Civil Engineering, vol. 29, no. 3, Article ID D4015003, 2017. View at Publisher · View at Google Scholar · View at Scopus
  14. E. Fallon, C. McNally, and A. Gibney, “Evaluation of fatigue resistance in asphalt surface layers containing reclaimed asphalt,” Construction and Building Materials, vol. 128, pp. 77–87, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. X. Luo, R. Luo, and R. L. Lytton, “Energy-based crack initiation criterion for viscoelastoplastic materials with distributed cracks,” Journal of Engineering Mechanics, vol. 141, no. 2, Article ID 04014114, 2015. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Sabouri and Y. R. Kim, “Development of a failure criterion for asphalt mixtures under different modes of fatigue loading,” Transportation Research Record, vol. 2447, pp. 117–125, 2014. View at Publisher · View at Google Scholar · View at Scopus
  17. E. Masad, V. T. F. Castelo Branco, D. N. Little, and R. Lytton, “A unified method for the analysis of controlled-strain and controlled-stress fatigue testing,” International Journal of Pavement Engineering, vol. 9, no. 4, pp. 233–246, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Bhasin, V. F. Castelo Branco, E. Masad, and D. N. Little, “Quantitative comparison of energy methods to characterize fatigue in asphalt materials,” Journal of Materials in Civil Engineering, vol. 21, no. 2, pp. 83–92, 2009. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Pasetto and N. Baldo, “Unified approach to fatigue study of high performance recycled asphalt concretes,” Materials and Structures, vol. 50, article no. 113, 2017. View at Publisher · View at Google Scholar
  20. T. Hou, B. S. Underwood, and Y. R. Kim, “Fatigue performance prediction of north carolina mixtures using the simplified viscoelastic continuum damage model,” Asphalt Paving Technology: Association of Asphalt Paving Technologists-Proceedings of the Technical Sessions, vol. 79, pp. 35–80, 2010. View at Google Scholar
  21. H. Zhang, L. Shan, Y. Tan, Y. Feng, and H. He, “Comparison of asphalt fatigue characteristics under different control modes,” Asphalt Pavements, vol. 1, pp. 1281–1289, 2014. View at Google Scholar
  22. D. Lei, P. Zhang, J. He, P. Bai, and F. Zhu, “Fatigue life prediction method of concrete based on energy dissipation,” Construction and Building Materials, vol. 145, pp. 419–425, 2017. View at Google Scholar
  23. H. Omrani, A. Tanakizadeh, A. R. Ghanizadeh, and M. Fakhri, “Investigating different approaches for evaluation of fatigue performance of warm mix asphalt mixtures,” Materials and Structures/Materiaux et Constructions, vol. 50, no. 2, article no. 149, 2017. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Modarres and A. Aloogar, “Comparison between the fatigue response of hot and warm mix asphalts based on the dissipated energy approach,” International Journal of Pavement Engineering, vol. 18, no. 1, pp. 60–72, 2017. View at Publisher · View at Google Scholar · View at Scopus
  25. J. Ji, Z. Suo, S. Yang, Y. Xu, and S. Xu, “Application of the dissipated energy theory to estimate the fatigue characteristics of hot and warm recycled sma mixtures,” International Symposium on Frontiers of Road and Airport Engineering, pp. 1–9, 2015. View at Google Scholar
  26. A. M. Bahadori, A. Mansourkhaki, and M. Ameri, “A phenomenological fatigue performance model of asphalt mixtures based on fracture energy density,” Journal of Testing and Evaluation, vol. 43, no. 1, pp. 133–139, 2015. View at Publisher · View at Google Scholar · View at Scopus
  27. A. Wu, Fatigue Performance Evaluation of Asphalt Mixture, Southeast University, Jiangsu, China, 2015.
  28. T. Ma, Y. Zhang, D. Zhang, J. Yan, and Q. Ye, “Influences by air voids on fatigue life of asphalt mixture based on discrete element method,” Construction and Building Materials, vol. 126, pp. 785–799, 2016. View at Publisher · View at Google Scholar · View at Scopus
  29. X. Luo and R. L. Lytton, “Characterization of healing of asphalt mixtures using creep and step-loading recovery test,” Journal of Testing and Evaluation, vol. 44, no. 6, pp. 2199–2210, 2016. View at Publisher · View at Google Scholar · View at Scopus
  30. Y. Hou, L. Wang, T. Pauli, and W. Sun, “Investigation of the asphalt self-healing mechanism using a phase-field model,” Journal of Materials in Civil Engineering, vol. 27, no. 3, Article ID 04014118, 2015. View at Publisher · View at Google Scholar · View at Scopus
  31. W. Huang, P. Lin, and M. Huang, “Comparison of the fatigue performance of asphalt mixtures considering self-healing,” International Symposium on Frontiers of Road and Airport Engineering, pp. 109–121, 2015. View at Google Scholar
  32. Ministry of Transport of the People's Republic of China, Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering (JTG E20-2011), China Communications Press, Beijing, China, 2011.